commands.txt

Read out the main freq.
  AL~FR0

Read out the sub freq.
  AL~FR1

  I/Q ON
  AL~SDRON

  I/Q OFF
  AL~SDROF

  Detection output ON
  AL~DETON

  Detection output OFF
  AL~DETOF

  DIAL operation
  AL~DIAL(*1)(*2)(*3)
  (*1)0: Left dials  1:Right dials
  (*2)U: Upper knob  L:Lower ring
  (*3)U: clockwise, D:c/clockwise

Key operation
  AL~KEY(*)
  (*)can be any of the following characters:
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  MAIN
  SUB
  SCOPE
  VPM
  .
  ENT
  L (Press left dial)
  R (Press right dial)
  F
  MONI
  SCAN

RF volume level
  AL~VOL(*1)(*2)(*3)
  (*1)0:main, 1:sub
     Send 0x13 followed by (*1) to read the current setting level.
  (*2)(*3)UP:up or DN:down and level in decimal 2-digit (Level 10 = 10)

  SQL
  AL~VOL(*1)(*2)(*3)
  (*1)0:main, 1:sub
     Send 0x13 followed by (*1) to read the current setting level.
  (*2)(*3)UP:up or DN:down and level in decimal 2-digit (Level 10 = 10)

  Mode setting
  AL~MODFM
  AL~MODAM
  AL~MODWFM
  AL~MODLSB
  AL~MODUSB
  AL~MODCW

  TSQ
  AL~TSQ(*1)(*2)(*3)(*4)
  (*1)0:main, 1:sub
     Send 0x13 followed by (*1) to read the current setting level.
Set the TSQ value to (*2)(*3)(*4)

  DCS
  AL~DCS
  AL~DCS(*1)(*2)(*3)(*4)
(*1)0:main, 1:sub
     Send 0x13 followed by (*1) to read the current setting level.
Set the DSQ value to (*2)(*3)(*4)

  Setting sub-tone
  AL~ST(*1)(*2)(*3)(*4)
(*1)0:main, 1:sub
     Send 0x13 followed by (*1) to read the current setting level.
  parameters: OFF, TSQ, SQ, DCS, TRAIN for (*2)(*3)(*4)

Writing frequencies
  AL~FW(*1)(*2)Å`(*11)
(*1)0:main, 1:sub
Enter GHz to 1Hz digit to (*2)Å`(*11)