You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have an Solax X3 Hybrid G4 15.0 inverter and 3x Triple Power batteries 5,8 kWh. I also have a Matebox Advanced which includes the Solax Smart Meter.
I use two things for monitoring:
Official Solax Cloud. Here the data comes from the WLAN dongle connected to the inverter.
Home Assistant. Here is use the Waveshare RS485 to RJ45 which gets the data from the COM-Port of the inverter and sends it to HA over TCP.
Setup and everything went perfectly fine. I can use the energy-board in HA and can access all data and parameters.
BUT:
The values in the Solax Cloud and in Home Assistant are different. The values in HA are about 10-20% higher then in Solax Cloud. Is this a known problem? or is there an explanation why this is the case?
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hi everybody!
I have an Solax X3 Hybrid G4 15.0 inverter and 3x Triple Power batteries 5,8 kWh. I also have a Matebox Advanced which includes the Solax Smart Meter.
I use two things for monitoring:
Setup and everything went perfectly fine. I can use the energy-board in HA and can access all data and parameters.
BUT:
The values in the Solax Cloud and in Home Assistant are different. The values in HA are about 10-20% higher then in Solax Cloud. Is this a known problem? or is there an explanation why this is the case?
Thx in advance!
Chris
Beta Was this translation helpful? Give feedback.
All reactions