Replies: 25 comments 53 replies
-
I have the same problem with solis RHI-6k-48ES-5G, 6kw inverter connected with rs485-we usb key, the first 6 digits of the serial are 114F62. |
Beta Was this translation helpful? Give feedback.
-
|
Just released 2023.09.3 with your Inverter in plugin_solis |
Beta Was this translation helpful? Give feedback.
-
Thanks for the plugin update, now receive 141 entities all working, I have another question regarding this, can I connect two receivers to a single inverter? |
Beta Was this translation helpful? Give feedback.
-
|
Have a look at: If you start getting Modbus read errors there isn't anything I can do about it. |
Beta Was this translation helpful? Give feedback.
-
|
I understand, to be honest I don't know how the data is extracted from the energy community device, I only know that it is connected via USB with an rs-485we key |
Beta Was this translation helpful? Give feedback.
-
|
wills106, congratulations for the excellent work, I managed to integrate both systems with the guide you recommended https://github.com/Jumpy07/Solis---SolisCloud-and-Home-Assistant , thanks again for your dedication to cause. |
Beta Was this translation helpful? Give feedback.
-
|
I need to integrate two more Solis S5-EH1P6k-L inverters with SN. 103105 and SN. 143105, is it possible? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, Been using this add-on for a long time now and recently started receiving this error. |
Beta Was this translation helpful? Give feedback.
-
|
If you have only started getting this have you seen #528 if you are on HA 2023.9.x? |
Beta Was this translation helpful? Give feedback.
-
|
Correct, it must have something to do with Modbus. I reverted a few versions and will try again later :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi - I'm getting the following error in my Log - however everything seems to be working fine - I do get data sent to the integration: unrecognized SolisDirect inverter type - serial number : unknown My inverter is a Solis RHI-6k-48ES-5G 6kW first 6 of my serial number are 603105 Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Your Inverter is already supported. If you are on HA 2023.9.x the make sure you are on Integration 2023.09.4. I don't know which Solis dongles work and which don't. A user posted a working one a few posts up. I have also posted a few links that might help above as well. |
Beta Was this translation helpful? Give feedback.
-
|
Dear Will, I have added Solax modbus power to my home assistant and am confused about the settings I need to add. It is asking for Modbus address as a single number and then asking for modbus ip address. I have left the first at 1 and then added the ip address of my wifi dongle (DLS-W). The integration is not reading any devices or entities. Please could you advise on how to get it communicating? Thank you very much! |
Beta Was this translation helpful? Give feedback.
-
@SoHSolar DLS-W is not compatible with Modbus and thus not compatible with this integration. Read more here https://github.com/alienatedsec/solis-ha-modbus-cloud |
Beta Was this translation helpful? Give feedback.
-
It is compatible with Modbus. I use DLS-W(Wi-Fi) with homeassistant and the https://github.com/StephanJoubert/home_assistant_solarman integration. No cloud, no extra hardware. |
Beta Was this translation helpful? Give feedback.
-
@honikos SolarMan is not the same as Modbus, so it's misleading to say it is. |
Beta Was this translation helpful? Give feedback.
-
|
I didn't say that. Solarman uses modbus. E.g. for Solis hybrid: https://www.scss.tcd.ie/Brian.Coghlan/Elios4you/RS485_MODBUS-Hybrid-BACoghlan-201811228-1854.pdf |
Beta Was this translation helpful? Give feedback.
-
|
@honikos Solarman-based devices encapsulate the Modbus protocol from the inverter via RS485 into an Ethernet packet that needs translating. Hence, this integration will not work with the DLS-W data logger. However, there are other data loggers e.g., DLS-L, S2-WL-ST that encapsulate the Modbus protocol from the inverter via RS485 into a Modbus TCP that is compatible with this integration, and is more standardised with Modbus across the industry. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, Is it possible to add support for Solis Inverter Model S5-EH1P5K-L Serial No last 6: |
Beta Was this translation helpful? Give feedback.
-
|
You need the first six digits not the last six digits of your serial number. |
Beta Was this translation helpful? Give feedback.
-
|
First 6 digits of serial number are 603104. Removed number from first comment. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm directly connected through a USR-TCP232-410S and readings with Node-RED are working. Thank you! |
Beta Was this translation helpful? Give feedback.
-
Is this an AC Storage Inverter with no PV then? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it is. It's a 1-phase AC battery inverter. |
Beta Was this translation helpful? Give feedback.
-
|
I have released 2023.09.6 but needs a bit of housekeeping as per the release notes. |
Beta Was this translation helpful? Give feedback.
-
|
Just updated. Thanks a lot! |
Beta Was this translation helpful? Give feedback.
-
|
I am getting the following errors: - unrecognized Solis inverter type - serial number : unknown My inverter is Solis S5-EH1P-L and the 1st 6 serial number digits are 603105 It actually works for a while, maybe an hour, then it stops. Reloading the plugin, or restarting HA brings it back to life for a short peried of time. Added error from HA This error originated from a custom integration. Logger: custom_components.solax_modbus Something went wrong reading from modbus |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
For ha, use this integration: https://github.com/StephanJoubert/home_assistant_solarman |
Beta Was this translation helpful? Give feedback.
-
|
Managed to fix by reducing the polling rate of the modbus data. I want modbus control of the inverter for charging the battery at different rates depending on solar forecast and remaining battery power. |
Beta Was this translation helpful? Give feedback.
-
|
Do you have a script to automate the charging? |
Beta Was this translation helpful? Give feedback.
-
|
Not yet. First step was to get the data stable and not hanging. I have Octopus Agile so next step is to find or write scripts. I have the below installed so far. https://github.com/BottlecapDave/HomeAssistant-OctopusEnergy |
Beta Was this translation helpful? Give feedback.
-
|
I have the same problem with Solis S6GR1p1.5K-M connected via TCP/Ethernet. The first 6 digits of the serial are 180102. I'm using the Solax Modbus integration. Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Give this a try: https://github.com/StephanJoubert/home_assistant_solarman worked for me with solis Wifi datalogging stick (do not now which version exactly, Label says "wifi en2-8m", I guess it's a Solis DLS-W Datalogger) |
Beta Was this translation helpful? Give feedback.
-
|
That’s a different integration - I have a problem with this integration and came on here to get my problem resolved. Your comment isn’t really helpful. |
Beta Was this translation helpful? Give feedback.
-
|
Solis have today updated my inverter firmware to fix a BMS alarm issue at 100% SOC. Since this I'm no longer seeing updates in HA. Can you advise what I need to do, please? |
Beta Was this translation helpful? Give feedback.
-
|
Scratch that - reboot HA and it's now back online and picking up the entity values. Thanks :) |
Beta Was this translation helpful? Give feedback.
-
|
So - does appear to be working for me - but very unstable - updates often taking 4-5 mins rather than every 15 secs as set. Sent from my iPhoneOn 16 Nov 2023, at 12:24, bulletcom ***@***.***> wrote:
Scratch that - reboot HA and it's now back online and picking up the entity values. Thanks :)
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, I have attempted to use the homeassistant-solax-modbus integration but I got: Model: Solis S6-EH3P10K-H-EU Directly connected via usb rs485 adapter. |
Beta Was this translation helpful? Give feedback.
-
|
okey, i am trying to get this to work. But i get no link on the RS485 port. Do you know if you have to enable it or something? I did not find any information in the manual about baud rates etc. |
Beta Was this translation helpful? Give feedback.
-
|
The baud rate is 9600. I don't think it needs to be enabled. But you have to be careful when creating the rj45 cable. You have to use the correct pins. |
Beta Was this translation helpful? Give feedback.
-
|
I got it to work now :) |
Beta Was this translation helpful? Give feedback.
-
|
How can I change the baud rate? |
Beta Was this translation helpful? Give feedback.
-
|
You cannot. It is unchangeable on the inverter side. You have to set it to 9600 on hass side during the integration setup. |
Beta Was this translation helpful? Give feedback.
-
|
I have a Solis RHI-1P5K-HVES-5G 5kW inverter, connected with a USR-W610 (modbus to wifi), using the solis profile, and I get: "unrecognized Solis inverter type - serial number : 140C02..." Thanks for making this plugin and thanks for any help. |
Beta Was this translation helpful? Give feedback.
-
|
I have added in your Inverter with 2024.01.6 |
Beta Was this translation helpful? Give feedback.
-
|
Hi having the unrecognized solis pv inverter error message Logger: custom_components.solax_modbus.plugin_solis_old unrecognized solis pv inverter type - serial number : unknown I have a Solis-1P3K-4G 3kw, dual mppt S/N 160A80 Thanks for making this plugin |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm getting the same error: |
Beta Was this translation helpful? Give feedback.
-
|
Just added the Inverter in with 2024.01.8 |
Beta Was this translation helpful? Give feedback.
-
|
Working now, thanks so much :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi, Is it possible to add support for Solis Inverter Model S5-GR3P12K Serial No 180507 |
Beta Was this translation helpful? Give feedback.
-
|
Will add it into the next release. |
Beta Was this translation helpful? Give feedback.
-
|
Added it into 2024.03.3 |
Beta Was this translation helpful? Give feedback.
-
|
I have a S5-GR3P12K s/n 1805070232 What can I do to resolve this. Greeting |
Beta Was this translation helpful? Give feedback.
-
|
Hello, would it be possible to support Solis S5-EH1P6K-L 6kW, connected with waveshare module, Serial: 143105 |
Beta Was this translation helpful? Give feedback.
-
|
I have just released 2024.03.7b4 with the Serial added in. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I have a twin inverter setup with 2 x Solis S5-EH1P3.6K-L first 6 of serial No 603102 for both. Would use 2 x waveshare modules & 2 instances of solax modbus integration. Could you advise if these inverters can be supported please? Many thanks. |
Beta Was this translation helpful? Give feedback.
-
|
The 6031's are already supported. You should be able to use just one waveshare if you assign a different address to the Inverters. You will need terminating resistors though. |
Beta Was this translation helpful? Give feedback.
-
|
That's great many thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I am a network newbie, just looking to make sure I get this right. I need 120Ω resistors attached between RS485 A & B terminals. 2 x Inverters and waveshare device will be connected in parallel, the resistors being needed on the waveshare device connection and the inverter that is "end of line" ie furthest from waveshare? Is there any risk of damage to the inverters if I get this wrong please? |
Beta Was this translation helpful? Give feedback.
-
|
You have the resistor locations correct. |
Beta Was this translation helpful? Give feedback.
-
|
Ok. I’m using JW solars instructions for making connections here
https://www.youtube.com/watch?v=wEasws0fIVg <https://www.youtube.com/watch?v=wEasws0fIVg&t=816s&ab_channel=JWSolar> &t=816s&ab_channel=JWSolar
Got connectors here
https://www.ebay.co.uk/itm/204361478937
On the inverters, pretty clear I need to daisy chain RS485 terminals, also Gnd and +5V ?
Do you know if its OK to provide a male connector that I can fit one of my existing Solis dataloggers to, so I can get firmware updates and keep access to Solis cloud? (not that Solis cloud is proving of much use).
From: wills106 ***@***.***>
Sent: Wednesday, April 3, 2024 4:50 PM
To: wills106/homeassistant-solax-modbus ***@***.***>
Cc: neilrfuller ***@***.***>; Comment ***@***.***>
Subject: Re: [wills106/homeassistant-solax-modbus] Unrecognized Inverter - Solis (Discussion #521)
You have the resistor locations correct.
Shouldn't be any risk.
If you leave them out you will probably get communication issues.
—
Reply to this email directly, view it on GitHub <#521 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BHNNAFD2XWW334625GQOP6LY3QQJ5AVCNFSM6AAAAAA4JIFLICVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DSOJYHE4TI> .
You are receiving this because you commented. <https://github.com/notifications/beacon/BHNNAFGFI2DWNH7FH36IWGLY3QQJ7A5CNFSM6AAAAAA4JIFLICWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQARFIFE.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Apologies, please ignore the last email. Since found Alienatedsec’s stuff which gives chapter & verse on Solis inverters & dataloggers. Not only a total networking noob but also a Github noob. Realised that a solis inverter only giving +5v ain’t gonna power the waveshare device which needs +9v so poe version seems like the solution. I’ll get there eventually….
From: ***@***.*** ***@***.***>
Sent: Wednesday, April 3, 2024 5:03 PM
To: 'wills106/homeassistant-solax-modbus' ***@***.***>
Subject: RE: [wills106/homeassistant-solax-modbus] Unrecognized Inverter - Solis (Discussion #521)
Ok. I’m using JW solars instructions for making connections here
https://www.youtube.com/watch?v=wEasws0fIVg <https://www.youtube.com/watch?v=wEasws0fIVg&t=816s&ab_channel=JWSolar> &t=816s&ab_channel=JWSolar
Got connectors here
https://www.ebay.co.uk/itm/204361478937
On the inverters, pretty clear I need to daisy chain RS485 terminals, also Gnd and +5V ?
Do you know if its OK to provide a male connector that I can fit one of my existing Solis dataloggers to, so I can get firmware updates and keep access to Solis cloud? (not that Solis cloud is proving of much use).
From: wills106 ***@***.*** ***@***.***> >
Sent: Wednesday, April 3, 2024 4:50 PM
To: wills106/homeassistant-solax-modbus ***@***.*** ***@***.***> >
Cc: neilrfuller ***@***.*** ***@***.***> >; Comment ***@***.*** ***@***.***> >
Subject: Re: [wills106/homeassistant-solax-modbus] Unrecognized Inverter - Solis (Discussion #521)
You have the resistor locations correct.
Shouldn't be any risk.
If you leave them out you will probably get communication issues.
—
Reply to this email directly, view it on GitHub <#521 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BHNNAFD2XWW334625GQOP6LY3QQJ5AVCNFSM6AAAAAA4JIFLICVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DSOJYHE4TI> .
You are receiving this because you commented. <https://github.com/notifications/beacon/BHNNAFGFI2DWNH7FH36IWGLY3QQJ7A5CNFSM6AAAAAA4JIFLICWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQARFIFE.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Hi @wills106 could you add my inverter please? Thank you. |
Beta Was this translation helpful? Give feedback.
-
Hi please could you add my Solis inverter type RHI-3K-48ES-5G, 3Kw, serial 160F422 - I was using the solis plugin. Many thanks |
Beta Was this translation helpful? Give feedback.
-
|
Hello @wills106, Can you please add my inverter: It's Hybrid 3.6kW Solis inverter 2024-09-04 09:19:44.920 ERROR (MainThread) [custom_components.solax_modbus.plugin_solis] unrecognized solax inverter type - serial number : 160F42 I am connecting to the Solis inverter via MODBUS waveshare devices. (confirmed working as I can read and control the inverter using https://github.com/Pho3niX90/solis_modbus) |
Beta Was this translation helpful? Give feedback.
-
|
What's the maximum charge / discharge Amps? Is it 62.5A or 100A or something else? |
Beta Was this translation helpful? Give feedback.
-
|
Hello @wills106, It's 60amp, yes. |
Beta Was this translation helpful? Give feedback.
-
|
I have released 2024.09.1 with this Inverter. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you so much @wills106 ! |
Beta Was this translation helpful? Give feedback.
-
|
Good evening, I wanted to congratulate you on the excellent work done with this integration. I need to integrate two more Solis S5-EH1P6k-L inverters with SN. 103105 and SN. 143105, is it possible? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, please can you add Sofar hyd3600-es. I have the same problem connected via TCP/Ethernet. The first 6 digits of the serial are SM1ES1. I'm using the Solax Modbus integration. I get the error about unrecognised inverter type despite using sofar_old option. Many thanks. |
Beta Was this translation helpful? Give feedback.
-
|
I'm really struggling to get this to work. I can see six entities but they all state "unknown". However, the serial number has pulled through, so the inverter is making Comms via the waveshare rs485 to Eth(B) converter. I've followed the guides and keep ending up at the same point. Any ideas? (I'm a bit of a novice, but I've done quite a lot with HA, and have the solarman integration working ok). |
Beta Was this translation helpful? Give feedback.
and others
-
If you get the following error in your log:
"unrecognized inverter type - serial number : {your_serial_number_here}"Please list below the first 6 digits here including the Inverter type and kW rating and which plugin you got a response with.
I can then add in your Inverter.
Please do not raise an issue in addition.
If you get
unrecognized XYZ inverter type - serial number : unknownyou don't have a working Modbus connection.Don't raise an issue, this isn't a fault of the Integration. Either use one of the existing discussions or start a new one.
Beta Was this translation helpful? Give feedback.
All reactions