We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
我按照上述步骤成功将1.4和1.3版本的模型导出成onnx模型了,经过我测试,似乎只在输入的图像仅包含头部的时候效果最好。我有个想法,将一张全身照的图片的头部截下来,调整尺寸到512后运行得到生成的图像,再将图像调整回原来的尺寸后放会原来裁剪的位置,但这种方式会导致裁剪出的图像边缘有条纹,结果如下所示:请问这种问题该如何解决?
The text was updated successfully, but these errors were encountered:
No branches or pull requests
我按照上述步骤成功将1.4和1.3版本的模型导出成onnx模型了,经过我测试,似乎只在输入的图像仅包含头部的时候效果最好。我有个想法,将一张全身照的图片的头部截下来,调整尺寸到512后运行得到生成的图像,再将图像调整回原来的尺寸后放会原来裁剪的位置,但这种方式会导致裁剪出的图像边缘有条纹,结果如下所示:请问这种问题该如何解决?
The text was updated successfully, but these errors were encountered: