Version 1.4.0.0 - Mexican Waterfalls Adapted

[zer0Kerbal]

---

Version 1.4.0.0 - Mexican Waterfalls Adapted

• 30 Jan 2022
• Release for Kerbal Space Program [KSP 1.12.x]

DO A CLEAN INSTALL: DELETE EXISTING THEN RE-INSTALL

DO A CLEAN INSTALL:
DELETE EXISTING INSTALLATION THEN RE-INSTALL

Download from CurseForge

---

Waterfall Effects

• Create <EnginesPlumeSWE.cfg>
• Add stock waterfall effects
• Thank you! 🚀 - @JamesErvin-5
• Work-In-Progress
• Requires to use:
  • Waterfall
  • Stock Waterfall Effects
• Closes Waterfall Effects #52 - Stock Waterfall Effects

Localization

• Create <es-mx.cfg>
• Adds Mexican translation - thank you - @JamesErvin-5 ⚽
• closes Mexican Spanish Translation! #50
• updates Localization - Master  #6

Lint Compatibility Patches

• closes Lint Compatibility Patches #65 - Lint Compatibility Patches
• [Little-Leo.cfg] v1.0.1.0
  • make footer one line
  • closes [Little-Leo.cfg] v1.0.1.0 #66 - [Little-Leo.cfg] v1.0.1.0
• [Aerobee-jr.cfg] v1.0.1.0
  • make footer one line
  • closes [Aerobee-jr.cfg] v1.0.1.0 #67 - [Aerobee-jr.cfg] v1.0.1.0
• Update [EnginesPlumeSWE.cfg] v1.0.1.0
  • Add header/footer
  • Add license (for now it is CC BY-SA 3.0 Unported)
  • Add ,StockWaterfallEffects to the :NEEDS
  • Thank you to @JamesErvin-5 for submitting these patches
  • closes Update [EnginesPlumeSWE.cfg] v1.0.1.0 #68 - Update [EnginesPlumeSWE.cfg] v1.0.1.0

Update X1

X1		diameter (m)	height (m)	math	radius (m)	m²	Liters
X1-body	cylinder	1.77	2.39	πr²h	0.885	5.88077	5880.78
X1-crew	cylinder	1.25	2.64	πr²h	0.625	3.23977	3239.77
X1-engine	cylinder	0.625	0.74	πr²h	0.3125	0.22703	227.03
X1-tail	cone	1.25	3.28	(πr²h)/3	0.625	1.34172	1341.73

• closes Update X1 #69 - Update X1

• [tbee-x1-body]

  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.885m
      • height = 2.39m
      • volume = 5.880772 m³ // 2.932971
      • m³ x 1000L = m³
      • packedVolume = 6000
  • closes [tbee-x1-body] #70 - [tbee-x1-body]

• [tbee-x1-tail]

  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cone
      • radius = 0.625m
      • height = 3.28m
      • volume = 1.341722 m³
      • m³ x 1000L = m³
      • packedVolume = 1350
  • closes [tbee-x1-tail] #71 - [tbee-x1-tail]

• [tbee-x1-crew]

  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.625 m
      • height = 2.64 m
      • volume = 0.876033 m³
      • m³ x 1000L = m³
      • packedVolume = 1000
  • closes [tbee-x1-crew] #72 - [tbee-x1-crew]

• [tbee-x1-engine]

  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.625 m
      • height = 0.74 m
      • volume = 0.242236 m³
      • m³ x 1000L = m³
      • packedVolume = 300
  • closes [tbee-x1-engine] #73 - [tbee-x1-engine]

Update Bumper

file name		diameter (m)	height (m)	width (m)	math	radius (m)	m²	Liters
bumper-body	cylinder	0.625	1.09		πr²h	0.3125	0.33441	334.41
bumper-control	cylinder	0.625	0.09		πr²h	0.3125	0.02761	27.62
bumper-engine	cylinder	0.625	1.34		πr²h	0.3125	0.41111	411.11
bumper-engine-unclad	cylinder	0.625	1.33		πr²h	0.3125	0.40804	408.04
bumper-fin	rectangle	0.46	1.42	0.02	LHW	0.23	0.01306	13.07
bumper-nose	cone	0.625	2.36		(πr²h)/3	0.3125	0.24135	241.35

• closes # Bumper #77 - Update Bumper

• [bumper-body.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125m
      • height = 1.09m
      • volume = 0.33441 m³
      • m³ x 1000L = m³
      • packedVolume = 350
      • stackableQuantity = 2
  • closes [bumper-body.cfg] #79 - [bumper-body.cfg]

• [bumper-control.cfg]

  • rename part cfg to use hyphen
  • uncomment [ModuleReactionWheel]
    • Pitch/Yaw/Roll Torque = 0.1
    • consumes [ElectricChange] at a rate of 0.1
  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125m
      • height = 0.09m
      • volume = 0.02761 m³
      • m³ x 1000L = 27.62 m³
      • packedVolume = 30
      • stackableQuantity = 10
  • closes [bumper-control.cfg] #80 - [bumper-control.cfg.cfg]

• [bumper-engine.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125m
      • height = 1.34m
      • volume = 0.41111 m³
      • m³ x 1000L = 411.11 m³
      • packedVolume = 425
      • stackableQuantity = 2
  • closes [bumper-engine.cfg] #81 - [bumper-engine.cfg]

• [bumper-engine-unclad.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125m
      • height = 1.33m
      • volume = 0.40804 m³
      • m³ x 1000L = 408.04 m³
      • packedVolume = 415
      • stackableQuantity = 2
  • closes [bumper-engine-unclad.cfg] #82 - [bumper-engine-unclad.cfg]

• [bumper-fin.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE
    • [ModuleCargoPart]
      • type = rectangle
      • x = 0.46m
      • y = 1.42m
      • z = 0.02m
      • volume = 0.01306 m³
      • m³ x 1000L = 13.07 m³
      • packedVolume = 14
      • stackableQuantity = 12
  • closes [bumper-fin.cfg] #83 - [bumper-fin.cfg]

• [bumper-nose.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cone
      • radius = 0.3125m
      • height = 2.36m
      • volume = 0.24135 m³
      • m³ x 1000L = 241.35 m³
      • packedVolume = 250
      • stackableQuantity = 4
  • closes [bumper-nose.cfg] #84 - [bumper-nose.cfg]

Update Taerobee

Taerobee		diameter (m)	height (m)	width (m)	math	radius (m)	m²	Liters
taerobee-adapter-short	trunc.cone	0.625	0.1	0.15625	(1/3)πh (r²+rR+R²)	0.3125	0.01790	17.9
taerobee-adapter-tall	trunc.cone	0.625	0.3	0.15625	(1/3)πh (r²+rR+R²)	0.3125	0.05369	53.69
taerobee-aerobee	cylinder	0.625	0.43		πr²h	0.3125	0.13192	131.93
taerobee-control	cylinder	0.625	0.1		πr²h	0.3125	0.03068	30.68
taerobee-decoupler	cylinder	0.625	0.19		πr²h	0.3125	0.05829	58.3
taerobee-despin	cylinder	0.625	0.1		πr²h	0.3125	0.03068	30.68
taerobee-fin-large	rectangle	0.36	0.72	0.02	LHW	0.1800	0.00518	5.19
taerobee-fin-small	rectangle	0.37	0.16	0.04	LHW	0.1850	0.00237	2.37
taerobee-nosecone	cone	0.625	0.98		(πr²h)/3	0.3125	0.10022	100.23
taerobee-parachute	cone	0.625	0.3		(πr²h)/3	0.3125	0.03068	30.68
taerobee-science	cylinder	0.625	0.3		πr²h	0.3125	0.09204	92.04
taerobee-sustainertank-3	cylinder	0.625	2.88		πr²h	0.3125	0.88357	883.58
taerobee-tinytim	cylinder	0.625	1.14		πr²h	0.3125	0.34975	349.75

• closes # Taerobee #78 - Update Taerobee

• [taerobee-adapter-short.cfg]

  • Create part based on Squad's adapterSmallMiniShort
    • [rescaleFactor] = 0.5
    • [bulkheadProfiles] = size00,size0
    • keep variants
  • add @thumb
  • Update Localization - <en-us.cfg>
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = trunc.cone
      • radius = 0.3125 m
      • Radius = 0.15625 m
      • height = 0.1 m
      • volume = 0.0179 m³
      • m³ x 1000L = 17.9 m³
      • packedVolume = 18
      • stackableQuantity = 20
  • closes [taerobee-adapter-short.cfg] #87 - [taerobee-adapter-short.cfg]

• [taerobee-adapter-tall.cfg]

  • Create part based on Squad's adapterSmallMiniTall
    • [rescaleFactor] = 0.5
    • [bulkheadProfiles] = size00,size0
    • keep variants
  • add @thumb
  • Update Localization - <en-us.cfg>
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = trunc.cone
      • radius = 0.3125 m
      • Radius = 0.15625 m
      • height = 0.3 m
      • volume = 0.05369 m³
      • m³ x 1000L = 53.69 m³
      • packedVolume = 55
      • stackableQuantity = 8
  • closes [taerobee-adapter-tall.cfg] #88 - [taerobee-adapter-tall.cfg]

• [taerobee-aerobee.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
  • Added [EngineType] = LiquidFuel to [ModuleEngines]]
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 0.43 m
      • volume = 0.13192 m³
      • m³ x 1000L = 131.93 m³
      • packedVolume = 150
      • stackableQuantity = 5
  • closes [taerobee-aerobee.cfg] #89 - [taerobee-aerobee.cfg]

• [taerobee-control.cfg]

  • Rename part cfg to use hyphen
  • Change [bulkheadProfiles] from size0 to size00
  • Change [ModuleCommand] EC consumption from 0.001 to 0.006 re: early tech worse than 0.005 (21.5/h)
  • Add [ModuleSAS] - no level
  • Add [ModuleReactionWheel]
    • PitchTorque = 0.5
    • YawTorque = 0.5
    • RollTorque = 0.5
    • torqueResponseSpeed = 11
    • consumes [ElectricCharge] at a rate of 0.01 re: early tech - worse than 0.0003
  • Updates[ModuleDataTransmitter]
    • [packetInterval] set to 1.0, was 0.6
    • [packetSize] set to 2, was 1
    • [antennaPower] set to 5000, was 50000
  • Resource [ElectricCharge] upped to 75, was 5 re: same size as Z-100 but earlier tech and other things in part
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 0.1 m
      • volume = 0.03068 m³
      • m³ x 1000L = 30.68 m³
      • packedVolume = 32
      • stackableQuantity = 12
  • closes [taerobee-control.cfg] #90 - [taerobee-control.cfg]

• [taerobee-decoupler.cfg]

  • rename part cfg to use hyphen
  • Change [bulkheadProfiles] from size0,srf to size00,srf
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 0.19 m
      • volume = 0.05829 m³
      • m³ x 1000L = 58.3 m³
      • packedVolume = 60
      • stackableQuantity = 8
  • closes [taerobee-decoupler.cfg] #91 - [taerobee-decoupler.cfg]

• [taerobee-despin.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • Resource [MonoPropellant] amount changed to 3.0 from 1.5
  • [ModuleSAS] consumption rate updated from 0.05 to 0.25
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 0.1 m
      • volume = 0.03068 m³
      • m³ x 1000L = 30.68 m³
      • packedVolume = 35
      • stackableQuantity = 10
  • closes [taerobee-despin.cfg] #92 - [taerobee-despin.cfg]

• [taerobee-fin-large.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = rectangle
      • x = 0.36m
      • y = 0.72m
      • z = 0.02m
      • volume = 0.00518 m³
      • m³ x 1000L = 5.19 m³
      • packedVolume = 6
      • stackableQuantity = 12
  • closes [taerobee-fin-large.cfg] #93 - [taerobee-fin-large.cfg]

• [taerobee-fin-small.cfg]

  • rename part cfg to use hyphen
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = rectangle
      • x = 0.37m
      • y = 0.72m
      • z = 0.04m
      • volume = 0.00237 m³
      • m³ x 1000L = 2.37 m³
      • packedVolume = 3
      • stackableQuantity = 20
  • closes [taerobee-fin-small.cfg] #94 - [taerobee-fin-small.cfg]

• [taerobee-nosecone.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cone
      • radius = 0.3125 m
      • height = 0.98 m
      • volume = .010022 m³
      • m³ x 1000L = 100.25 m³
      • packedVolume = 125
      • stackableQuantity = 4
  • closes [taerobee-nosecone.cfg] #95 - [taerobee-nosecone.cfg]

• [taerobee-parachute.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0
  • Added [buoyancyUseCubeNamed] = PACKED
  • Added FX
    • [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple
    • [sound_decoupler_fire] = decouple
  • Updated [maxTemp] from 2000 to 2250 re: prototype
  • Added [emissiveConstant] = 0.7
  • Changed [crashTolerence] from 12 to 8
  • Added [preferredStage] = PARACHUTESTAGE
  • [ModuleParachute]
    • [clampMinAirPressure] = 0.04
    • [deploymentSpeed] set to 0.12 was 1
    • [semiDeploymentSpeed] set to 0.5 was 1
    • [chuteMaxTemp] = 650
  • [ModuleDragModifier]
    • [dragModifier] set to 1.25 was 1
  • [ModuleDecouple]
    • [ejectionForcePercent] = 100
    • [fxGroupName] = decouple
    • [menuName] = #TBEE-decoup-menu
    • [stagingEnableText] = #TBEE-decoup-enable
    • [stagingDisableText] = #TBEE-decoup-disable
  • Added [ModuleTestSubject], copied from MK1
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cone
      • radius = 0.3125 m
      • height = 0.3 m
      • volume = 0.03068 m³
      • m³ x 1000L = 30.68 m³
      • packedVolume = 35
      • stackableQuantity = 12
  • closes [taerobee-parachute.cfg] #96 - [taerobee-parachute.cfg]

• [taerobee-science.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 0.3 m
      • volume = 0.09204 m³
      • m³ x 1000L = 92.04 m³
      • packedVolume = 100
      • stackableQuantity = 4
  • closes [taerobee-science.cfg] #97 - [taerobee-science.cfg]

• [taerobee-sustainertank-3.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 2.88 m
      • volume = 0.88357 m³
      • m³ x 1000L = 883.58 m³
      • packedVolume = 900
      • stackableQuantity = 1
  • closes [taerobee-sustainertank-3.cfg] #98 - [taerobee-sustainertank-3.cfg]

• [taerobee-tinytim.cfg]

  • rename part cfg to use hyphen
  • change [bulkheadProfiles] from size0 to size00
  • FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
  • Added [EngineType] = SolidBooster to [ModuleEngines]
  • ADD FX
    • [fx_exhaustSparks_yellow] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
    • [fx_smokeTrail_medium] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
    • [sound_explosion_low] = flameout
  • Adjust [entryCost] = 50 from 0
  • Change [category] = Engine from Propulsion
  • Add [heatConductivity] = 0.06 note: 1/2 default
  • [skinInternalConductionMult] = 4.0
  • [emissiveConstant] = 0.5 note: yes, it's white. But let's claim it's an emissive white...
  • Change
    • [maximum_drag] from 0.3 to 0.2
    • [crashTolerance] from 8 to 7
    • [maxTemp] from 3400 to 2000
  • Add [ModuleJettison]
  • Adjust [SolidFuel] resource
    • [amount] to 35 initially 10
    • [maAmount] to 35 initially 10
    • math:
      • volume of Part in L = 349.75
      • divide by 50 for units (ratio taken from stock solidBooster RT-10)
      • multiple by 5 units per unit for SolidFuel
      • = 34.95 units of [SolidFuel]
  • Add
    • DRAG_CUBE]
    • [ModuleCargoPart]
      • type = cylinder
      • radius = 0.3125 m
      • height = 1.14 m
      • volume = 0.34975 m³
      • m³ x 1000L = 349.78L
      • packedVolume = 400
      • stackableQuantity = 1
  • closes [taerobee-tinytim.cfg] #99 - [taerobee-tinytim.cfg]

Status

• 7ranceaddic7 #25 - 7ranceaddic7 adoption- contributed by zer0Kerbal
• merge in tythos #26 - merge in tythos adoption- contributed by zer0Kerbal
• Peter-JY-a #27 - Peter-JY-a adoption- contributed by zer0Kerbal
• Peter-JY-100 #28 - Peter-JY-100 adoption- contributed by zer0Kerbal
• tk-313 #29 - tk-313 adoption- contributed by zer0Kerbal
• 1.3.0.0 archive #30 - 1.3.0.0 archive adoption- contributed by zer0Kerbal
• 1.3.9.9 adoption #32 - 1.3.9.9 adoption adoption- contributed by zer0Kerbal
• Create es-mx.cfg #49 - Create es-mx.cfg- contributed by JamesErvin-5
• Create EnginesPlumeSWE.cfg #51 - Create EnginesPlumeSWE.cfg issue: compatibility/patch, issue: config, type: feature, type: request, state: approved- contributed by JamesErvin-5
• upstream changes #53 - upstream changes type: upstream- contributed by zer0Kerbal
• X1 updates #74 - X1 updates issue: config, type: fix- contributed by zer0Kerbal
• Revert "Update Bumper" #85 - Revert "Update Bumper"- contributed by zer0Kerbal
• Update Bumper #86 - Update Bumper issue: config- contributed by zer0Kerbal
• Update taerobee 1.4.0.0 #101 - Update taerobee 1.4.0.0 issue: config- contributed by zer0Kerbal
• Adoption Legal MumboJumbo #1 - Adoption Legal MumboJumbo adoption
• Adoption Documentation #2 - Adoption Documentation adoption
• Release 1.3.9.9-adoption #3 - Release 1.3.9.9-adoption adoption
• Adoption - GitHub #4 - Adoption - GitHub adoption
• Adoption - social media #5 - Adoption - social media adoption
• Localization - English (United States) <en-us.cfg>  #7 - Localization - English (United States) <en-us.cfg>
• Localization - Russian (Русский) <ru.cfg>  #8 - Localization - Russian (Русский) <ru.cfg>
• Merge in other forks #23 - Merge in other forks
• Thumbnails #33 - Thumbnails adoption
• add antenna to both control parts #34 - add antenna to both control parts
• move art assets to Assets #35 - move art assets to Assets adoption
• Update decoupler #36 - Update decoupler adoption
• update English Localization <en-us.cfg> #37 - update English Localization <en-us.cfg> adoption
• Update sustainer tank #39 - Update sustainer tank adoption
• Update Bumper body #40 - Update Bumper body adoption
• Update Bumper engine #41 - Update Bumper engine adoption
• Update Bumper engine unclad #42 - Update Bumper engine unclad adoption
• Update Bumper Nose #43 - Update Bumper Nose adoption
• Update X1 Body #44 - Update X1 Body adoption
• Update X1 Tail #45 - Update X1 Tail adoption

---

See More

• Changelog Summary for more details of changes : See ChangeLog
• Discussions and news on this mod: See Discussions or KSP Forums
• Known Issues for more details of feature requests and known issues : See Known Issues

Localization

• English
• ![Mexican][MX] Mexican (Mexicano)
• Russian (Русский) [incomplete]
• your translation here

HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome!

---

How to support this and other great mods by zer0Kerbal

---

*red box below is a link to forum post on how to get support*

Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date

---

---

This discussion was created from the release Version 1.4.0.0 - Mexican Waterfalls Adapted.