diff --git a/content/cn/docs/config/config-authentication.md b/content/cn/docs/config/config-authentication.md
index ac50e2337..7e8f28f44 100644
--- a/content/cn/docs/config/config-authentication.md
+++ b/content/cn/docs/config/config-authentication.md
@@ -123,7 +123,7 @@ bin/start-hugegraph.sh
 在 `docker run` 中添加环境变量 `PASSWORD=123456`（密码可以自由设置）即可开启鉴权模式：：
 
 ```bash
-docker run -itd -e PASSWORD=123456 --name=server -p 8080:8080 hugegraph/hugegraph:1.2.0
+docker run -itd -e PASSWORD=123456 --name=server -p 8080:8080 hugegraph/hugegraph:1.3.0
 ```
 
 #### 2. 采用 docker-compose
@@ -134,7 +134,7 @@ docker run -itd -e PASSWORD=123456 --name=server -p 8080:8080 hugegraph/hugegrap
 version: '3'
 services:
   server:
-    image: hugegraph/hugegraph:1.2.0
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     ports:
       - 8080:8080
diff --git a/content/cn/docs/contribution-guidelines/validate-release.md b/content/cn/docs/contribution-guidelines/validate-release.md
index efa1ce69f..86f6a22e5 100644
--- a/content/cn/docs/contribution-guidelines/validate-release.md
+++ b/content/cn/docs/contribution-guidelines/validate-release.md
@@ -5,7 +5,7 @@ weight: 3
 ---
 
 > Note: 这篇文档会持续更新。
-> 建议使用 Java11 验证测试，从 1.5.0 版本开始(除 client 外) 不再支持 Java8
+> 你需要使用 Java11 验证测试 (如果希望测试功能/运行时)，从 1.5.0 版本开始 (除 client 外) 不再支持 Java8
 
 ## 验证阶段
 
diff --git a/content/cn/docs/quickstart/hugegraph-hubble.md b/content/cn/docs/quickstart/hugegraph-hubble.md
index b27bd4fcd..6e0223407 100644
--- a/content/cn/docs/quickstart/hugegraph-hubble.md
+++ b/content/cn/docs/quickstart/hugegraph-hubble.md
@@ -53,7 +53,7 @@ weight: 3
 > 
 > 若 hubble 和 server 在同一 docker 网络下，**推荐**直接使用`container_name` (如下例的 `server`) 作为主机名。或者也可以使用 **宿主机 IP** 作为主机名，此时端口号为宿主机给 server 配置的端口
 
-我们可以使用 `docker run -itd --name=hubble -p 8088:8088 hugegraph/hubble` 快速启动 [hubble](https://hub.docker.com/r/hugegraph/hubble).
+我们可以使用 `docker run -itd --name=hubble -p 8088:8088 hugegraph/hubble:1.2.0` 快速启动 [hubble](https://hub.docker.com/r/hugegraph/hubble).
 
 或者使用 docker-compose 启动 hubble，另外如果 hubble 和 server 在同一个 docker 网络下，可以使用 server 的 contain_name 进行访问，而不需要宿主机的 ip
 
@@ -63,13 +63,13 @@ weight: 3
 version: '3'
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     ports:
       - 8080:8080
 
   hubble:
-    image: hugegraph/hubble
+    image: hugegraph/hubble:1.2.0
     container_name: hubble
     ports:
       - 8088:8088
diff --git a/content/cn/docs/quickstart/hugegraph-loader.md b/content/cn/docs/quickstart/hugegraph-loader.md
index ed533d441..d077f6f07 100644
--- a/content/cn/docs/quickstart/hugegraph-loader.md
+++ b/content/cn/docs/quickstart/hugegraph-loader.md
@@ -31,7 +31,7 @@ HugeGraph-Loader 是 HugeGraph 的数据导入组件，能够将多种数据源
 
 #### 2.1 使用 Docker 镜像 (便于**测试**)
 
-我们可以使用 `docker run -itd --name loader hugegraph/loader`部署 loader 服务。对于需要加载的数据，则可以通过挂载 `-v /path/to/data/file:/loader/file` 或者`docker cp`的方式将文件复制到 loader 容器内部。
+我们可以使用 `docker run -itd --name loader hugegraph/loader:1.3.0` 部署 loader 服务。对于需要加载的数据，则可以通过挂载 `-v /path/to/data/file:/loader/file` 或者`docker cp`的方式将文件复制到 loader 容器内部。
 
 或者使用 docker-compose 启动 loader, 启动命令为 `docker-compose up -d`, 样例的 docker-compose.yml 如下所示：
 
@@ -40,19 +40,19 @@ version: '3'
 
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     ports:
       - 8080:8080
 
   hubble:
-    image: hugegraph/hubble
+    image: hugegraph/hubble:1.2.0
     container_name: hubble
     ports:
       - 8088:8088
 
   loader:
-    image: hugegraph/loader
+    image: hugegraph/loader:1.3.0
     container_name: loader
     # mount your own data here
     # volumes:
diff --git a/content/cn/docs/quickstart/hugegraph-server.md b/content/cn/docs/quickstart/hugegraph-server.md
index bf9111762..bd79b6c5a 100644
--- a/content/cn/docs/quickstart/hugegraph-server.md
+++ b/content/cn/docs/quickstart/hugegraph-server.md
@@ -39,12 +39,12 @@ Core 模块是 Tinkerpop 接口的实现，Backend 模块用于管理数据存
 
 可参考 [Docker 部署方式](https://github.com/apache/incubator-hugegraph/blob/master/hugegraph-server/hugegraph-dist/docker/README.md)。
 
-我们可以使用 `docker run -itd --name=server -p 8080:8080 hugegraph/hugegraph` 去快速启动一个内置了 `RocksDB` 的 `Hugegraph server`.
+我们可以使用 `docker run -itd --name=server -p 8080:8080 hugegraph/hugegraph:1.3.0` 去快速启动一个内置了 `RocksDB` 的 `Hugegraph server`.
 
 可选项：
 
 1. 可以使用 `docker exec -it server bash` 进入容器完成一些操作
-2. 可以使用 `docker run -itd --name=server -p 8080:8080 -e PRELOAD="true" hugegraph/hugegraph` 在启动的时候预加载一个**内置的**样例图。可以通过 `RESTful API` 进行验证。具体步骤可以参考 [5.1.1](/cn/docs/quickstart/hugegraph-server/#511-%E5%90%AF%E5%8A%A8-server-%E7%9A%84%E6%97%B6%E5%80%99%E5%88%9B%E5%BB%BA%E7%A4%BA%E4%BE%8B%E5%9B%BE) 
+2. 可以使用 `docker run -itd --name=server -p 8080:8080 -e PRELOAD="true" hugegraph/hugegraph:1.3.0` 在启动的时候预加载一个**内置的**样例图。可以通过 `RESTful API` 进行验证。具体步骤可以参考 [5.1.1](/cn/docs/quickstart/hugegraph-server/#511-%E5%90%AF%E5%8A%A8-server-%E7%9A%84%E6%97%B6%E5%80%99%E5%88%9B%E5%BB%BA%E7%A4%BA%E4%BE%8B%E5%9B%BE) 
 3. 可以使用 `-e PASSWORD=123456` 设置是否开启鉴权模式以及 admin 的密码，具体步骤可以参考 [Config Authentication](/cn/docs/config/config-authentication#使用-docker-时开启鉴权模式) 
 
 如果使用 docker desktop，则可以按照如下的方式设置可选项：
@@ -59,7 +59,7 @@ Core 模块是 Tinkerpop 接口的实现，Backend 模块用于管理数据存
 version: '3'
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     # environment:
     #  - PRELOAD=true 为可选参数，为 True 时可以在启动的时候预加载一个内置的样例图
@@ -72,7 +72,7 @@ services:
 > 
 > 1. hugegraph 的 docker 镜像是一个便捷版本，用于快速启动 hugegraph，并不是**官方发布物料包方式**。你可以从 [ASF Release Distribution Policy](https://infra.apache.org/release-distribution.html#dockerhub) 中得到更多细节。
 >
-> 2. 推荐使用 `release tag`(如 `1.3.0`) 以获取稳定版。使用 `latest` tag 可以使用开发中的最新功能。
+> 2. 推荐使用 `release tag` (如 `1.3.0/1.5.0`) 以获取稳定版。使用 `latest` tag 可以使用开发中的最新功能。
 
 #### 3.2 下载 tar 包
 
@@ -516,7 +516,7 @@ volumes:
 
 1. 使用`docker run`
 
-    使用 `docker run -itd --name=server -p 8080:8080 -e PRELOAD=true hugegraph/hugegraph:latest`
+    使用 `docker run -itd --name=server -p 8080:8080 -e PRELOAD=true hugegraph/hugegraph:1.3.0`
 
 2. 使用`docker-compose`
 
@@ -526,7 +526,7 @@ volumes:
     version: '3'
       services:
         server:
-          image: hugegraph/hugegraph:latest
+          image: hugegraph/hugegraph:1.3.0
           container_name: server
           environment:
             - PRELOAD=true
diff --git a/content/en/docs/config/config-authentication.md b/content/en/docs/config/config-authentication.md
index 9d4c1822e..512c63df9 100644
--- a/content/en/docs/config/config-authentication.md
+++ b/content/en/docs/config/config-authentication.md
@@ -26,7 +26,7 @@ user(name=xx) -belong-> group(name=xx) -access(read)-> target(graph=graph1, reso
 
 By default, HugeGraph does **not enable** user authentication, and it needs to be enabled by 
 modifying the configuration file (Note: If used in a production environment or over the internet, 
-please use a **Java11** version and enable **auth-system** to avoid security risks.)" 
+please use a **Java11** version and enable **auth-system** to avoid security risks.)
 
 You need to modify the configuration file to enable this feature. HugeGraph provides built-in authentication mode: `StandardAuthenticator`. This mode supports multi-user authentication and fine-grained permission control. Additionally, developers can implement their own `HugeAuthenticator` interface to integrate with their existing authentication systems.
 
@@ -119,7 +119,7 @@ bin/start-hugegraph.sh
 
 ```
 
-### Use docker to enble authentication mode
+### Use docker to enable authentication mode
 
 For versions of the hugegraph/hugegraph image equal to or greater than 1.2.0, you can enable authentication mode while starting the Docker image. 
 
@@ -130,12 +130,12 @@ The steps are as follows:
 To enable authentication mode, add the environment variable `PASSWORD=123456` (you can freely set the password) in the `docker run` command:
 
 ```bash
-docker run -itd -e PASSWORD=123456 --name=server -p 8080:8080 hugegraph/hugegraph:1.2.0
+docker run -itd -e PASSWORD=123456 --name=server -p 8080:8080 hugegraph/hugegraph:1.3.0
 ```
 
 #### 2. Use docker-compose
 
-Use `docker-compose` and set he environment variable `PASSWORD=123456`:
+Use `docker-compose` and set the environment variable `PASSWORD=123456`:
 
 ```yaml
 version: '3'
diff --git a/content/en/docs/contribution-guidelines/validate-release.md b/content/en/docs/contribution-guidelines/validate-release.md
index de9a8dd05..398d79c14 100644
--- a/content/en/docs/contribution-guidelines/validate-release.md
+++ b/content/en/docs/contribution-guidelines/validate-release.md
@@ -5,7 +5,7 @@ weight: 3
 ---
 
 > Note: this doc will be updated continuously.
-> It is recommended to use Java11 in verification, we will drop Java8 support from version 1.5.0
+> You need to use Java11 in runtime verification, we will drop Java8 support from version 1.5.0 (And currently doesn't support Java17)
 
 ## Verification
 
@@ -19,7 +19,7 @@ subsequent **email reply**.(The following are the core items)
 
 If there is no svn or gpg or wget environment locally, it is recommended to install it first 
 (windows recommend using WSL2 environment, or at least `git-bash`), also make sure to install java 
-(recommended 11) and maven software
+(prefer Java 11) and maven software
 
 ```bash
 # 1. install svn
diff --git a/content/en/docs/quickstart/hugegraph-hubble.md b/content/en/docs/quickstart/hugegraph-hubble.md
index 13fb48d7b..2664e8eb7 100644
--- a/content/en/docs/quickstart/hugegraph-hubble.md
+++ b/content/en/docs/quickstart/hugegraph-hubble.md
@@ -64,7 +64,7 @@ There are three ways to deploy `hugegraph-hubble`
 >
 >  If `hubble` and `server` is in the same docker network, we **recommend** using the `container_name` (in our example, it is `server`) as the hostname, and `8080` as the port. Or you can use the **host IP** as the hostname, and the port is configured by the host for the server.
 
-We can use `docker run -itd --name=hubble -p 8088:8088 hugegraph/hubble` to quick start [hubble](https://hub.docker.com/r/hugegraph/hubble).
+We can use `docker run -itd --name=hubble -p 8088:8088 hugegraph/hubble:1.2.0` to quick start [hubble](https://hub.docker.com/r/hugegraph/hubble).
 
 Alternatively, you can use Docker Compose to start `hubble`. Additionally, if `hubble` and the graph are in the same Docker network, you can access the graph using the container name of the graph, eliminating the need for the host machine's IP address.
 
@@ -74,13 +74,13 @@ Use `docker-compose up -d`，`docker-compose.yml` is following:
 version: '3'
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     ports:
       - 8080:8080
 
   hubble:
-    image: hugegraph/hubble
+    image: hugegraph/hubble:1.2.0
     container_name: hubble
     ports:
       - 8088:8088
diff --git a/content/en/docs/quickstart/hugegraph-loader.md b/content/en/docs/quickstart/hugegraph-loader.md
index 02ba802c2..36189057b 100644
--- a/content/en/docs/quickstart/hugegraph-loader.md
+++ b/content/en/docs/quickstart/hugegraph-loader.md
@@ -29,7 +29,7 @@ There are two ways to get HugeGraph-Loader:
 
 #### 2.1 Use Docker image (Convenient for Test/Dev)
 
-We can deploy the loader service using `docker run -itd --name loader hugegraph/loader`. For the data that needs to be loaded, it can be copied into the loader container either by mounting `-v /path/to/data/file:/loader/file` or by using `docker cp`.
+We can deploy the loader service using `docker run -itd --name loader hugegraph/loader:1.3.0`. For the data that needs to be loaded, it can be copied into the loader container either by mounting `-v /path/to/data/file:/loader/file` or by using `docker cp`.
 
 Alternatively, to start the loader using docker-compose, the command is `docker-compose up -d`. An example of the docker-compose.yml is as follows:
 
@@ -38,13 +38,13 @@ version: '3'
 
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     ports:
       - 8080:8080
 
   loader:
-    image: hugegraph/loader
+    image: hugegraph/loader:1.3.0
     container_name: loader
     # mount your own data here
     # volumes:
diff --git a/content/en/docs/quickstart/hugegraph-server.md b/content/en/docs/quickstart/hugegraph-server.md
index 5b4f06bac..75d914e3b 100644
--- a/content/en/docs/quickstart/hugegraph-server.md
+++ b/content/en/docs/quickstart/hugegraph-server.md
@@ -19,7 +19,7 @@ The Core Module is an implementation of the Tinkerpop interface; The Backend mod
 
 #### 2.1 Install Java 11 (JDK 11)
 
-Consider using Java 11 to run `HugeGraph-Server` (compatible with Java 8 before 1.5.0), 
+You need to use Java 11 to run `HugeGraph-Server` (compatible with Java 8 before 1.5.0, but not recommended to use), 
 and configure by yourself.
 
 **Be sure to execute the `java -version` command to check the jdk version before reading**
@@ -42,12 +42,12 @@ There are four ways to deploy HugeGraph-Server components:
 <!-- 3.1 is linked by another place. if change 3.1's title, please check -->
 You can refer to [Docker deployment guide](https://hub.docker.com/r/hugegraph/hugegraph).
 
-We can use `docker run -itd --name=graph -p 8080:8080 hugegraph/hugegraph` to quickly start an inner `HugeGraph server` with `RocksDB` in background.
+We can use `docker run -itd --name=graph -p 8080:8080 hugegraph/hugegraph:1.3.0` to quickly start an inner `HugeGraph server` with `RocksDB` in background.
 
 Optional: 
 1. use `docker exec -it graph bash` to enter the container to do some operations.
-2. use `docker run -itd --name=graph -p 8080:8080 -e PRELOAD="true" hugegraph/hugegraph` to start with a **built-in** example graph. We can use `RESTful API` to verify the result. The detailed step can refer to [5.1.7](#517-create-an-example-graph-when-startup)
-3. use `-e PASSWORD=123456` to enable auth mode and set the passoword for admin. You cna find more details from [Config Authentication](/docs/config/config-authentication#Use-docker-to-enble-authentication-mode)
+2. use `docker run -itd --name=graph -p 8080:8080 -e PRELOAD="true" hugegraph/hugegraph:1.3.0` to start with a **built-in** example graph. We can use `RESTful API` to verify the result. The detailed step can refer to [5.1.7](#517-create-an-example-graph-when-startup)
+3. use `-e PASSWORD=123456` to enable auth mode and set the password for admin. You can find more details from [Config Authentication](/docs/config/config-authentication#Use-docker-to-enble-authentication-mode)
 
 If you use docker desktop, you can set the option like: 
 <div style="text-align: center;">
@@ -60,7 +60,7 @@ Also, if we want to manage the other Hugegraph related instances in one file, we
 version: '3'
 services:
   server:
-    image: hugegraph/hugegraph
+    image: hugegraph/hugegraph:1.3.0
     container_name: server
     # environment:
     #  - PRELOAD=true
@@ -75,7 +75,7 @@ services:
 >
 > 1. The docker image of hugegraph is a convenience release to start hugegraph quickly, but not **official distribution** artifacts. You can find more details from [ASF Release Distribution Policy](https://infra.apache.org/release-distribution.html#dockerhub).
 > 
-> 2. Recommand to use `release tag`(like `1.3.0`) for the stable version. Use `latest` tag to experience the newest functions in development.
+> 2. Recommend to use `release tag`(like `1.3.0`/`1.5.0`) for the stable version. Use `latest` tag to experience the newest functions in development.
 
 #### 3.2 Download the binary tar tarball
 
@@ -536,7 +536,7 @@ Set the environment variable `PRELOAD=true` when starting Docker in order to loa
 
 1. Use `docker run`
 
-    Use `docker run -itd --name=server -p 8080:8080 -e PRELOAD=true hugegraph/hugegraph:latest`
+    Use `docker run -itd --name=server -p 8080:8080 -e PRELOAD=true hugegraph/hugegraph:1.3.0`
 
 2. Use `docker-compose`
 
@@ -546,7 +546,7 @@ Set the environment variable `PRELOAD=true` when starting Docker in order to loa
     version: '3'
       services:
         server:
-          image: hugegraph/hugegraph:latest
+          image: hugegraph/hugegraph:1.3.0
           container_name: server
           environment:
             - PRELOAD=true