Net::Netmask - Parse, manipulate and lookup IPv4 network blocks
use Net::Netmask;
my $net = Net::Netmask.new('192.168.75.8/29');
say $net.desc; # 192.168.75.8/29 (same as ~$net or $net.Str)
say $net.base; # 192.168.75.8
say $net.mask; # 255.255.255.248
say $net.broadcast; # 192.168.75.15
say $net.hostmask; # 0.0.0.7
say $net.bits; # 29
say $net.size; # 8
if $net.match('192.168.75.10') -> $pos {
say "$peer is in $net and is at index $pos.";
}
# Enumerate subnet
for $net.enumerate -> $ip {
say $ip;
}
# Split subnet into smaller blocks
for $net.enumerate(:30bit :nets) -> $addr {
say $addr;
}Net::Netmask parses and understands IPv4 and IPv6 CIDR blocks. The interface is inspired by the Perl module of the same name.
Not all methods support IPv6 yet. The IPv6 interface is subject to change and should be considered experimental.
This module does not have full method parity with it's Perl cousin. Pull requests are welcome.
Net::Netmask objects are created with an IP address and mask.
Currently, the following forms are recognized
# CIDR notation (1 positional arg)
Net::Netmask.new('192.168.75.8/29');
# Address and netmask (1 positional arg)
Net::Netmask.new('192.168.75.8 255.255.255.248');
# Address and netmask (2 positional args)
Net::Netmask.new('192.168.75.8', '255.255.255.248');
# Named arguments
Net::Netmask.new( :address('192.168.75.8') :netmask('255.255.255.248') );Using a 'hostmask' (aka, 'wildcard mask') in place of the netmask will also work.
If you create a Net::Netmask object from one of the host addresses in the subnet, it will still work
my $net = Net::Netmask.new('192.168.75.10/29');
say $net.desc; # 192.168.75.8/29IPv4 Addresses are validated against the following subset
token octet { (\d+) <?{ $0 <= 255 }> }
regex address { <octet> ** 4 % '.' }
subset IPv4 of Str where /<address>/;Returns the first address of the network block, aka the network address.
Synonyms: base, first
Returns the subnet mask in dotted-quad notation.
Synonyms: mask
Returns the inverse of the netmask, aka wildcard mask.
Returns the last address of the network block, aka the broadcast address.
Synonyms: last
Returns the number of bits in the network portion of the netmask, which is the same number that appears at the end of a network written in CIDR notation.
say Net::Netmask.new('192.168.0.0', '255.255.255.0').bits; # 24
say Net::Netmask.new('192.168.0.0', '255.255.255.252').bits; # 30Returns the number of IP address in the block
say Net::Netmask.new('192.168.0.0', '255.255.255.0').size; # 256
say Net::Netmask.new('192.168.0.0', '255.255.255.252').size; # 4method match(IPv4 $ip)Given a valid IPv4 address, returns a true value if the address is contained within the subnet. That is to say, it will return the addresses index in the subnet.
my $net = Net::Netmask.new('192.168.0.0/24');
if $net.match('192.168.0.0') -> $pos {
say "IP is at index $pos.";
}In the above example, match returns 0 but True, so even if you are matching on the network address (at position 0) it still evaluates as True. If the address is not in the subnet, it will return False.
You could also build a ridumentary blacklist (or whitelist) checker out of an array of Net::Netmask objects.
my @blacklist = map { Net::Netmask.new($_) },
< 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 >;
my $host = '192.168.0.15';
if ( any @blacklist».match($host) ) {
say "$host is blacklisted";
}method enumerate(Int :$bit = 32, Bool :$nets)Returns a lazy list of the IP addresses in that subnet. By default, it enumerates over all the 32-bit subnets (ie. single addresses) in the subnet, but by providing an optional named Int argument :$bit , you can split the subnet into smaller blocks
my $net = Net::Netmask.new('192.168.75.8/29');
say $net.enumerate(:30bit);
# OUTPUT: (192.168.75.8 192.168.75.12)Additionally, you can also pass an optional named Bool argument :$nets, which will return Net::Netmask objects instead of Strs.
my $net = Net::Netmask.new('192.168.75.8/29');
say $net.enumerate(:30bit :nets).map( *.desc );
# OUTPUT: (192.168.75.8/30 192.168.75.12/30)While you can subscript into the list generated by enumerate, it is not recommended for large subnets, because it will still need to evaluate all previous entries before the subscripted one.
say "The address at index 4 is $net.enumerate[4]"
# Addresses 0..3 were still evaluatedInstead you are recommended to use the nth method.
method nth($n, Int :$bit = 32, Int :$nets)This method works similarly to enumerate, except it is optimised for subscripting, which is most noticeable with large ranges
my $net = Net::Netmask.new('10.0.0.0/8');
# Instant result
say "The 10000th address is " ~ $net.nth(10000);
# Takes several seconds
say "The 10000th address is " ~ $net.enumerate[10000];This method will also happily takes a Range as it's argument, but if you want to get any trickier, you will need to provide a container to ensure it is passed as a single argument.
# Works as expected
say $net.nth(10000..10010);
# Too many arguments
say $net.nth(10000..10010, 20000);
# Works if in container
say $net.nth([10000..10010, 20000]);
# This also works
my @n = 10000..10010, 20000;
say $net.nth(@n);The named arguments :$bit and :$nets work just like enumerate. Note that when using :$bit, the $nth index is based on how many subnets your are producing.
my $net2 = Net::Netmask.new('192.168.75.8/29');
say $net2.nth(3);
# OUTPUT: (192.168.75.11)
say $net2.nth(3, :30bit);
# FAILURE: Index out of range. Is: 3, should be in 0..1;
say $net2.nth(^2, :30bit :nets)».nth(^2);
# OUTPUT: ((192.168.75.8 192.168.75.9) (192.168.75.12 192.168.75.13))method next()Returns a Net::Netmask object of the next block with the same mask.
my $net = Net::Netmask.new('192.168.0.0/24');
my $next = $net.next;
say "$next comes after $net"; # 192.168.1.0/24 comes after 192.168.0.0/24Alternatively, you can increment your Net::Netmask object to the next block by using the auto-increment operator
say "This block is $net"; # This block is 192.168.0.0/24
$net++;
say "Next block is $net"; # Next block is 192.168.1.0/24method prev()Just like next but in reverse. Returns a Net::Netmask object of the previous block with the same mask.
my $net = Net::Netmask.new('192.168.1.0/24');
my $prev = $net.prev;
say "$prev comes before $net"; # 192.168.0.0/24 comes before 192.168.1.0/24Alternatively, you can decrement your Net::Netmask object to the previous block by using the auto-decrement operator
say "This block is $net"; # This block is 192.168.1.0/24
$net--;
say "Next block is $net"; # Previous block is 192.168.0.0/24my @nets = Net::Netmask.new('192.168.1.0/24'),
Net::Netmask.new('192.168.0.0/16'),
Net::Netmask.new('192.168.0.0/24');
say @nets.sort(*.sortkey)[0]; # 192.168.0.0/16
say @nets.sort(*.sk)[0]; # 192.168.0.0/16Provides a numeric value (Rat) that can be used as a sort key. Note that this value should not be directly used, as it is subject to future changes. This routine will return smaller values for smaller CIDR network addresses. I.E. the value for 10.0.0.0 will always be smaller than the value for 192.168.0.0. Where the network address is the same, a CIDR with a shorter prefix will appear before one with a longer CIDR prefix. Thus, the sortkey() for 192.168.0.0/16 will be smaller than the sortkey() for 192.168.0.0/24.
Synonym: sk
my @nets = Net::Netmask.new('192.168.1.0/24'),
Net::Netmask.new('192.168.0.0/16'),
Net::Netmask.new('192.168.0.0/24');
say Net::Netmask.sort(@nets)[0] # 192.168.0.0/16This sort method will use the internal sortkey() method to provide a sorted sequence of Net::Netmask objects. Note that you must call this only on the class (I.E. Net::Netmask.sort(...)) and never on an individual instance (I.E. $net.sort(...). If called on an instance rather than the class, an exception will be thrown.
my $net = Net::Netmask.new('192.168.1.0/24');
say $net.Int; # 3232235776Returns an Int representing the integer value of the IP address (similar to inet_atoi).
Synonym: Real
my $net = Net::Netmask.new('192.168.1.0/24');
say $net.Str; # 192.168.1.0/24Returns the stringification of the object.
dec2ip(2130706433); #127.0.0.1
Converts decimal number to IPv4 address string.
ip2dec('127.0.0.1'); #2130706433
Converts string IPv4 address to decimal number.
Some updates have been made by Joelle Maslak [email protected]
Initial IPv6 code contributed by Lukas Vale.
Yes, this module is fully functional for IPv4 but not-so-complete for IPv6. It's enough for me, but there's always room to grow. Pull requests welcome.
As mentioned in the description, this module does not have method parity with the Perl module of the same name. I didn't really look at how the other module is implemented, so there's a chance some of my methods might be horribly inefficient. Pull requests are welcome!
The Artistic License 2.0
See LICENSE file in the repository for the full license text.