Production files for Steezy60SMK Rev B2

Production files for Steezy60SMK Rev B2

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all options.

Files output in metric, 4:3.

Changes:

• Changing underglow LEDs to 2020 instead of 5050
• Adding footprint support for molex UDB connector

Status: Not yet prototyped, no support in QMK or VIA

Production files for Steezy60ALPS Rev B2

Production files for Steezy60ALPS Rev B2

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all options.

Files output in metric, 4:3.

Changes:

• Changing underglow LEDs to 2020 instead of 5050
• Adding footprint support for molex UDB connector

Status: Not yet prototyped, no support in QMK or VIA

Production files for Steezy60SMK Rev B1

Production files for Steezy60SMK Rev B1

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all options.

Files output in metric, 4:3.

Changes:

• Changing MCU to APM/STM32F072
• Updating partnumbers to newer components available at JLC/LCSC

Status: Not yet prototyped, no support in QMK or VIA

Production files for Steezy60ALPS Rev B1

Production files for Steezy60ALPS Rev B1

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all options.

Files output in metric, 4:3.

Changes:

• Changing MCU to APM/STM32F072
• Updating partnumbers to newer components available at JLC/LCSC

Status: Not yet prototyped, no support in QMK or VIA

Steezy60SMK Rev A5

Production files for Steezy60SMK Rev A5

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all three options.

Files output in metric, 4:3.

Changes:

• Moved daughter board a bit to fit better in bakeneko cases.
• Added cutout for bakeneko V3
• Added assembly option for PCB to fit in wilba cases
• Minor tweaks and improvements

Steezy60ALPS Rev A5

Production files for Steezy60ALPS Rev A5

Use BOM depending on which case the PCB is intended to be used with. "All" BOM can be used for making your own assembly option, it will not make the PCB fit all three options.

Files output in metric, 4:3.

Changes:

• Moved daughter board a bit to fit better in bakeneko cases.
• Added cutout for bakeneko V3 (untested)
• Added assembly option for PCB to fit in wilba cases (untested)
• Minor tweaks and improvements

Steezy60SMK Rev A4

Production files for Steezy60SMK Rev A4

Files output in metric, 4:3.

Changes: Moved daughter board to align with other projects.

Updated 2020-02-04: Tweaked mounting holes and fixed missing diodes in assembly drawing

Steezy60ALPS Rev A4

Production files for Steezy60ALPS Rev A4

Files output in metric, 4:3.

Changes: Moved daughter board to align with other projects.

Updated 2020-02-04: Tweaked mounting holes and fixed missing diodes in assembly drawing

Steezy60SMK Rev A3

Production files for Steezy60SMK Rev A3

Files output in metric, 4:3.

Changes:

• Improved routing
• Added support for rubber-band cases
• Added support for some Canon spherical keycaps

Steezy60ALPS Rev A3

Production files for Steezy60ALPS Rev A3

Files output in metric, 4:3.

Changes:

• Improved routing
• Added support for rubber-band cases
• Added support for some Canon spherical keycaps