AvaotaSBC-openEuler

There is no 简体中文.

This repository provides scripts for building openEuler image for AvaotaSBC.

How To Download the Latest Image

Release

How to Build Images

NOTICE:
Five openEuler versions are currently supported for Avaota-A1, i.e., 22.03 LTS, 22.03 LTS SP1, 22.03 LTS SP2 and 22.03 LTS SP3. When building an image with desktop environment, you need to pay attention to three issues:

1. Need to set the parameter -s/--spec. Please refer to the description of this parameter for details. The corresponding -r/-repo parameter needs to be set at the same time.

Prepare the Environment

• OS: openEuler or Fedora
• Hardware: AArch64 hardware, Such as the RaspberryPi or RK3399/RK3588 SBCs.

Run the Scripts to Build Images

Run the following command to build images:

sudo bash build.sh -n NAME -k KERNEL_URL -b KERNEL_BRANCH -c BOARD_CONFIG -r REPO_INFO -d DTB_NAME -s SPEC

NOTE: You can directly execute "sudo bash build.sh" to build an openEuler 20.03 LTS image for Avaota-A1 with the script's default parameters.

After the script is executed, the following files will be generated in the build/YYYY-MM-DD folder of the directory where the script is located:

• A compressed RAW original image：openEuler-VERSION-BOARD-ARCH-RELEASE.img.xz

The meaning of each parameter:

1. -n, --name IMAGE_NAME

   The image name to be built. For example, openEuler-22.03-LTS-Avaota-A1-aarch64-alpha1 or openEuler-21.09-Firefly-RK3399-aarch64-alpha1.

2. -k, --kernel KERNEL_URL

   The URL of kernel source repository, which defaults to https://github.com/AvaotaSBC/linux.git. You can set the parameter as [email protected]:AvaotaSBC/linux.git or [email protected]:114514/linux.git according to the requirement.

3. -b, --branch KERNEL_BRANCH

   The branch name of kernel source repository, which defaults to openEuler-20.03-LTS. According to the -k parameter, you have the following options:

   • -k https://github.com/AvaotaSBC/linux.git
     • linux-5.10-oe

4. -c, --config BOARD_CONFIG

   To use a Syterkit on the Avaota-A1, you can set this option to 'avaota-a1'.

5. -r, --repo REPO_INFO

   The URL/path of target repo file, or the list of repositories' baseurls. Note that, the baseurls should be separated by space and enclosed in double quotes. Examples are as follows:

   • The URL of target repo file: https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo.

   • The path of target repo file: ./openEuler-22.03-LTS.repo：for building openEuler 22.03 LTS image, refer to https://gitee.com/src-openeuler/openEuler-repos/blob/openEuler-22.03-LTS/generic.repo for details.

   • List of repo's baseurls: http://repo.openeuler.org/openEuler-22.03-LTS/OS/aarch64/ http://repo.openeuler.org/openEuler-22.03-LTS/EPOL/aarch64/.

6. -d, --device-tree DTB_NAME

   The device name in the kernel device-tree whitch is a little different from the board name. It corresponds to the DTB_NAME.dts file under the kernel/arch/arm64/boot/dts/allwinner folder. The default is sun55i-t527-avaota-a1.

7. -s, --spec SPEC

   Specify the image version:

   • headless, image without desktop environments.
   • xfce, image with Xfce desktop environment and related software including CJK fonts and IME.
   • ukui, image with UKUI desktop environment and fundamental software without CJK fonts and IME.
   • dde, image with DDE desktop environment and fundamental software without CJK fonts and IME.
   • The file path of rpmlist, the file contains a list of the software to be installed in the image, refer to rpmlist for details.

   The default is headless.

8. -h, --help

   Displays help information.

Applicable AvaotaSBC SBCs:

1. Avaota-A1

   The tested versions are as follows:

   • openEuler-22.03-LTS, run the following command:

     sudo bash build.sh -n openEuler-22.03-LTS-Avaota-A1-aarch64-alpha1 -k https://github.com/AvaotaSBC/linux.git -b linux-5.10-oe -c avaota-a1 -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -d sun55i-t527-avaota-a1 -s headless

   • openEuler-22.03-LTS with xfce desktop, run the following command:

     sudo bash build.sh -n openEuler-22.03-LTS-Avaota-A1-aarch64-alpha1 -k https://github.com/AvaotaSBC/linux.git -b linux-5.10-oe -c avaota-a1 -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -d sun55i-t527-avaota-a1 -s xfce

How to Use an Image

Install an Image on an SD Card