Quartz sync: Jan 30, 2024, 11:44 AM

content/CodeMeter/Create CodeMeter Content File.md

@@ -17,14 +17,14 @@ tags:
 1. Ensure that the Dongle is plugged in and the CodeMeter runtime is installed.<br>
 2. Right click on Windows Desktop<br>
 3. Select new > Wibu Control File<br>
-![New WIBU Document: Select type](images/CodeMeterControlFile_01.png)<br>
+![[CodeMeterControlFile_01.png]]<br>
 4. CmDongle Remote Programming Context-File is selected by default<br>
 5. Click on create<br>
-![Firm Codes CmDongle](images/CodeMeterControlFile_02.png)<br>
+![[CodeMeterControlFile_02.png]]<br>
 6. Make sure that the item **100160** is selected and Click on ok<br>
 7. Wait for the process to be finished<br>
-![CmRmtAct64](images/CodeMeterControlFile_03.png)<br>
+![[CodeMeterControlFile_03.png]]<br>
 8. Click ok to close the dialog<br>
 9. Find the newely created file "MyCodeMeter.WibuCmRaC" on the Windows Desktop<br>
-![Cm File](images/CodeMeterControlFile_04.png)<br>
+![[CodeMeterControlFile_04.png]]<br>
 10. Send this file by e-mail to your GTR contact.<br>

content/CodeMeter/No Entry Found Error 200.md

@@ -8,12 +8,12 @@ tags:
 
 ### A1: Dongle damaged or runtime problem
 
-![Error Message](images/CodeMeter_NoEntryFound_200.png)<br>
+![[CodeMeter_NoEntryFound_200.png]]<br>
 
 
 1. Restart the PC / machine<br>
 2. Plug out the CM Dongle<br>
-3. Open the CodeMeter Control Center (Icon in the Windows Taskbar) by double clicking on it ![Runtime Icon](images/CodeMeterRuntime_Icon.png)<br>
+3. Open the CodeMeter Control Center (Icon in the Windows Taskbar) by double clicking on it ![[CodeMeterRuntime_Icon.png]]<br>
 3.1 When no Windows taskbar is visible, open Windows Explorer and enter CodeMeterCC.exe as address and press enter
 4. The icon should be colored gray, showing that no CM stick is inserted.
 5. Re-Insert the GTR CM Dongle

content/Database/Firebird/Change Password.md

@@ -4,7 +4,8 @@ draft: false
 tags:
 ---
 
-# Change Password for a Firebird Database user
+
+## Change Password for a Firebird Database user
 
 The default credentials for FireBird are
 
@@ -24,12 +25,12 @@ If this default settings need to be changed follow the guide below
  cd '.\Program Files (x86)\Firebird\Firebird_2_5\bin\'
 ````
 
-![](images/fb_001_changepwd.png)
+![[fb_001_changepwd.png]]
 
 call gsec.exe to set a new password like shown below:
 
 
-![](images/fb_002_changepwd.png)
+![[fb_002_changepwd.png]]
 
 ````sh
 .\gsec.exe -user sysdba -password masterkey -database "C:\Program Files (x86)\Firebird\Firebird_2_5\security2.fdb"
@@ -67,7 +68,7 @@ Start ProfDia / ExProg Toolbox and open the **Database configuration** tab
 
 Click **Load from INI** to load the current configuration
 
-![](images/fb_003_changepwd.png)
+![[fb_003_changepwd.png]]
 
 Enter the new password in the password field and apply the changes by pressing the **Setup Database** button.
 

content/Database/Firebird/Setup Common Firebird Server.md

@@ -1,6 +1,6 @@
 ---
 title: Setup Common Firebird Server
-draft: false
+draft: true
 tags:
 ---
 

content/ProfDia Toolbox/App Localization.md

@@ -4,9 +4,6 @@ draft: false
 tags:
 ---
 
-# App Localization
-
-
 This function enforces a specific language in all internationalized GTR software products (if available). By default, the application language is based on the operating system language.
 If a language is not available, the application defaults to **English**.
 

content/ProfDia Toolbox/Application Backup and Restore.md

@@ -4,7 +4,6 @@ draft: false
 tags:
 ---
 
-# Application backup and restore
 
 Using this function, a backup and restore of all settings from ProfDia(F) / Exprog installations can be easily made.
 

content/ProfDia Toolbox/CodeMeter Related.md

@@ -4,12 +4,11 @@ draft: false
 tags:
 ---
 
-# CodeMeter
 
 Use this function to gather inforamtion about a CodeMeter dongle. Just plug in your dongle into the PC and click **Search GTR Key**. After a few seconds the re LED will turn into a green LED. Also your CodeMeter **serial number** will be displayed.
 
 
-![CodeMeter](images/CodeMeterRelated.png)
+![[CodeMeterRelated.png]]
 
 
 If your dongle has been locked and you want to request a recoding, you can export your CodeMeter dongle configuration with "Create Control File". For this, a path must be set in "Select Output Directory". The created file has the name: "MyCodeMeter.WibuCmRaC". With this file attached to your mail we can do a recoding. Please also include the Serial Number of your dongle in your mail.<br>

content/ProfDia Toolbox/Database Configuration.md

@@ -3,7 +3,6 @@ title: Database Configuration
 draft: false
 tags:
 ---
-# Database Configuration
 
 > [!info] Information
 > See further details in the [ProfDia](http://gtr.de/docs/profdia_fanuc/en) manual!

content/ProfDia Toolbox/Database Export Data.md

@@ -4,12 +4,11 @@ draft: false
 tags:
 ---
 
-# Export Database Project
 
 > [!info]
    In principal this function is the same as the procect export function in ProfDia
 
-![Export Projects](images/DatabaseExportData.png)
+![[DatabaseExportData.png]]
 
 By clicking the button **Read all Proj** all projects from the database are loaded. Select the project you want to export from the drop down menu **Project ID**.
 In **Target Base directory** your output directory must be set.

content/ProfDia Toolbox/Database Migration BDE-SQL.md

@@ -4,7 +4,6 @@ draft: false
 tags:
 ---
 
-# Database Migration BDE -> SQL
 
 >[!info]
 > For further information check the ProfDia manual.

content/ProfDia Toolbox/Database Restore Firebird Backup.md

@@ -4,8 +4,6 @@ draft: false
 tags:
 ---
 
-# Firebird database recovery
-
 ## Summary
 
 With Firebird based software products from GTR, a freeware software called **GBAK Scheduler** [^1] is also installed. This software is doing a database backup.
@@ -37,10 +35,10 @@ The ProfDiaToolbox program is required to restore the respective database. This
 
 Start the ProfDiaToolbox application by double-clicking ProfDiaToolbox.exe in the installation directory.
 
-![Toolbox Start](images/toolbox-start.png)
+![[toolbox-start.png]]
 
 Click on "1" and select **Database Restore Backup (Firebird)**.
-![Toolbox Restore View](images/toolbox-restore-view.png)
+![[toolbox-restore-view.png]]
 
 The **Username** and **Password** fields are pre-populated with the default data for the database administrator.
 
@@ -55,11 +53,10 @@ After pressing the **Restore** button, a black window appears with the actual re
 The ProfDiaToolbox can now be closed again. The database is now ready for use again.
 
 
-!!!info "Hint for ProfDia Toolbox Versions <1.21.0"
-    For older versions of ProfDia Toolbox, the following points must be observed:
-
-	- for plain-set backups, the file extension must be adjusted manually in the backup file selection. To do this, enter ***** in the text field of the database name and confirm with Enter. This will display all files in the current directory. A selection of the backup file is thus easily possible.
-	- Before the actual restore, the existing database file must be deleted or renamed.
+> [!info] Hint for ProfDia Toolbox Versions <1.21.0
+> For older versions of ProfDia Toolbox, the following points must be observed:
+> - for plain-set backups, the file extension must be adjusted manually in the backup file selection. To do this, enter ***** in the text field of the database name and confirm with Enter. This will display all files in the current directory. A selection of the backup file is thus easily possible.
+> - Before the actual restore, the existing database file must be deleted or renamed.
 	
 
 ## Manual database recovery using gbak.exe
@@ -69,7 +66,7 @@ It is possible to restore the database from the command line using gbak.exe. The
 - C:\\Program Files (x86)\\Firebird\\Firebird_2\_5\\bin
 
 The installation directory can also be determined in the green box at the bottom of the graphic.
-![PDRestoreView](images/toolbox-restore-view.png) 
+![[toolbox-restore-view.png]]
 
 Command for recovery:
 
@@ -84,15 +81,15 @@ Example:
 -   Confirm by pressing **enter**
 
 
-![Command line Window 1](images/cmd_line_01.png)
+![[cmd_line_01.png]]
 
 -   Go in the cmd window to your installation path
 
-![Command line Window 2](images/cmd_line_02.png)
+![[cmd_line_02.png]]
 
--  Insert the recivery command and confirm with **enter**
+-  Insert the recovery command and confirm with **enter**
 
-![Command line Window 3](images/cmd_line_03.png)
+![[cmd_line_03.png]]
 
 The recovery process is done!
 

content/ProfDia Toolbox/Merge SQL Databases.md

@@ -1,6 +1,6 @@
 ---
 title: Merge SQL Databases
-draft: false
+draft: true
 tags:
 ---
 

content/ProfDia Toolbox/Visualize Measurement Data.md

@@ -4,11 +4,9 @@ draft: false
 tags:
 ---
 
-## Visualize Measurement Data
-
 With this function you can evaluate grphically the latest measuring data from your current project.
 
-![Visualize Measurement Data](images/VIsualizeMeasurementData_01.png)
+![[VIsualizeMeasurementData_01.png]]
 
 > [!info]
 > To be able to read out this data, the following points must be observed:

content/ProfDia Toolbox/Z Height Offset.md

@@ -4,7 +4,6 @@ draft: false
 tags:
 ---
 
-# Z Height Offset Calc
 
 > [!info]
 > This value is only available/important for wire EDM versions of ProfDia/Exprog!
@@ -18,7 +17,7 @@ After doing the machine setup GTR recommends to do a double-U test cut. With thi
 For the test cut you have to do a DXF-drawing with correct values.
 
 
-![Double-U Profile](images/DoubleU.png)
+![[DoubleU.png]]
 
 The profile has to be drawn like in the picture above. At the end of the profile (left side) is just a move away movement to ensure, that the cut out material falls apart. The  profile has to be drawn on the correct tool-radius (orientation to existing test plate). If the test cut has to be repeated, it is possible to set a diameter offset.
 
@@ -27,12 +26,12 @@ The profile has to be drawn like in the picture above. At the end of the profile
 > The offset value refers to the **diameter** not the radius
 
 
-![Double-U Profile Dimensioned](images/DoubleU_Dim.png)
+![[DoubleU_Dim.png]]
 
 The dimensions of the test cut are quite simple. The edge lengths are always 1mm. If necessary (thicker material) the edge lengths can also be increased with consultating GTR. The test cut inerits axial angles and radial angles.
 
 
-![Double-U Profile Angles](images/DoubleU_Angles.png)
+![[DoubleU_Angles.png]]
 
 Settings for the subcontour:
 
@@ -54,19 +53,19 @@ If the test cut is finished, measure B2 and B2 and insert the values in the corr
 Additionally you have to select, whether the PCD surface is up or down aligned.
 
 
-![Z Height Offset Calc](images/ZHeightOffsetCalc.png)
+![[ZHeightOffsetCalc.png]]
 
 After the values are inserted, click **calculate**. The software now is calculating the Z-height offset and also a correction value for the wire offset.
 The Z hieght correction has to be set now in ProfDia.
 Start ProfDia and click **Setings for connected machine**.
 
 
-![Setings for connected machine](images/ZHeightOffsetCalc_ProfDia_01.png)
+![[ZHeightOffsetCalc_ProfDia_01.png]]
 
 In the small window insert the calculated value at **Z-zero.**
 
 
-![Z-zero](images/ZHeightOffsetCalc_ProfDia_02.png)
+![[ZHeightOffsetCalc_ProfDia_02.png]]
 
 If value B1 is measured B1 <> 1mm, the ProfDia toolbox calculates a correction value for the wire offsets. This offsets have to be set at the relevant technologies.
 

content/ProfDia(F) Fanuc/Common Setup Issues.md

@@ -4,9 +4,6 @@ draft: false
 tags:
 ---
 
-# Collection of Issues while running the ProfDia setup
-
-
 ### Q: I get the Error on successive palpations
 
 This means that while touching on the **same** spot on the mandrel for 3 times, the deviation from probing to probing is **>3µm**

content/ProfDia(F) Fanuc/Fanuc Parameter Setup.md

@@ -4,9 +4,9 @@ draft: false
 tags:
 ---
 
-# ProfDia Machine Setup
+## ProfDia Machine Setup
 
-## Important Parameter Settings in FANUC control Alpha iD and up
+### Important Parameter Settings in FANUC control Alpha iD and up
 
 To successfully use the ProfDia Software with the FANUC EDM, the following parameters need to be set on the control.
 

content/ProfDia(F) Fanuc/Get free on Retract Alarm.md

@@ -4,8 +4,6 @@ draft: false
 tags:
 ---
 
-# Get free on Retract Alarm
-
 1.  Go into "Step" mode
 2.  Move away in 1/10 increments until there is no more short circuit
 3.  Press D-Pos Button 

content/index.md

@@ -1,10 +1,11 @@
 ---
-title: 
+title: Welcome
 draft: false
 ---
 
-This is the new GTR FAQ Collection.
-Please check the navigation or the search box to find help.
+Welcome to the newly setup GTR FAQ Collection
+
+Please check the navigation or the search box to get help.
 
 > [!info]
 > The FAQ is under heavy development. So not everything might be available.