- NRF 51 SDK 8.1.0
- Arduino IDE
- Simblee platform for arduino
- Update Makefile with paths to the NRF SDK, and your serial board, and where arduino is installed.
Program a shoe sensor with id 1, turning off serial for power savings
make program SERIAL_PORT=/dev/cu.usbserial-FTZ86FTC SENSOR_CONFIGURATION_OPTIONS="--no-serial" TARGET_BOARD=BOARD_SHOE_SENSOR SENSOR_ID=1
Program an area sensor with id 3, turning off serial for power savings:
make program SERIAL_PORT=/dev/cu.usbserial-AI04QL7P SENSOR_CONFIGURATION_OPTIONS="--no-serial" TARGET_BOARD=BOARD_LESSON_TRACKER SENSOR_ID=3
Program a listening device that doesn't sleep, and listens all the time.
make program SERIAL_PORT=/dev/cu.usbserial-DN00CSZ7 SENSOR_CONFIGURATION_OPTIONS="--no-sleep" TARGET_BOARD=BOARD_RFD77201 SENSOR_ID=51
Program a master clock device that doesn't sleep, listens all the time, and broadcasts its clock signal at full power.
make program SERIAL_PORT=/dev/cu.usbserial-AI04QL7P SENSOR_CONFIGURATION_OPTIONS="--no-sleep" TARGET_BOARD=BOARD_LESSON_TRACKER CLOCK_MASTER=yes SENSOR_ID=61