[pull] main from armbian:main

config/boards/retroidpocket-rp5.csc

@@ -0,0 +1,123 @@
+# Retroid Pocket RP5 Configuration
+declare -g BOARD_NAME="Retroid Pocket RP5"
+declare -g BOARD_MAINTAINER="tjstyle"
+declare -g BOARDFAMILY="sm8250"
+declare -g KERNEL_TARGET="current"
+declare -g EXTRAWIFI="no"
+declare -g MODULES="panel_ddic_ch13726a"
+declare -g BOOTCONFIG="none"
+
+declare -g UEFI_GRUB_TERMINAL="gfxterm" # Use graphics in grub, for the Armbian wallpaper.
+declare -g GRUB_CMDLINE_LINUX_DEFAULT="clk_ignore_unused pd_ignore_unused arm64.nopauth efi=noruntime fbcon=rotate:3 console=ttyMSM0,115200n8"
+declare -g BOOT_FDT_FILE="qcom/sm8250-retroidpocket-rp5.dtb"
+
+declare -g SERIALCON="${SERIALCON:-tty1}"
+
+enable_extension "grub"
+enable_extension "grub-with-dtb" # important, puts the whole DTB handling in place.
+
+# declare -g BOOT_LOGO=desktop
+
+# Use the full firmware, complete linux-firmware plus Armbian's
+declare -g BOARD_FIRMWARE_INSTALL="-full"
+
+function retroidpocket-rp5_is_userspace_supported() {
+	[[ "${RELEASE}" == "bookworm" ]] && return 0
+	[[ "${RELEASE}" == "jammy" ]] && return 0
+	[[ "${RELEASE}" == "noble" ]] && return 0
+	[[ "${RELEASE}" == "trixie" ]] && return 0
+	return 1
+}
+
+function pre_customize_image__retroidpocket-rp5_alsa_ucm_conf() {
+	if ! retroidpocket-rp5_is_userspace_supported; then
+		return 0
+	fi
+
+	display_alert "Add alsa-ucm-conf for ${BOARD}" "${RELEASE}" "warn"
+	(
+		cd "${SDCARD}/usr/share/alsa" || exit 6
+		curl -L "https://github.com/RetroidPocket/alsa-ucm-conf/archive/refs/heads/rp/v1.2.13.tar.gz" | tar xvzf - --strip-components=1
+	)
+}
+
+function post_family_tweaks_bsp__retroidpocket-rp5_add_services() {
+	if ! retroidpocket-rp5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Add services" "info"
+
+	# Bluetooth MAC addr setup service
+	mkdir -p $destination/usr/local/bin/
+	mkdir -p $destination/usr/lib/systemd/system/
+	install -Dm655 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.sh $destination/usr/local/bin/
+	install -Dm644 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.service $destination/usr/lib/systemd/system/
+
+	# Haptic and Gamepad rules
+	install -Dm644 $SRC/packages/bsp/retroidpocket/90-feedbackd-spmi-haptics.rules $destination/etc/udev/rules.d/90-feedbackd-spmi-haptics.rules
+	install -Dm644 $SRC/packages/bsp/retroidpocket/99-ignore-gamepad.rules $destination/etc/udev/rules.d/99-ignore-gamepad.rules
+}
+
+function post_family_tweaks__retroidpocket-rp5_enable_services() {
+	if ! retroidpocket-rp5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Enable services" "info"
+
+	chroot_sdcard systemctl enable bt-fixed-mac.service
+	return 0
+}
+
+function post_family_config__retroidpocket-rp5_extra_packages() {
+	if ! retroidpocket-rp5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "Setting up extra packages for ${BOARD}" "${RELEASE}" "info"
+	add_packages_to_image "bluez" "bluetooth"        # for bluetooth stuff
+	add_packages_to_image "mtools"                   # for access to the EFI partition
+	add_packages_to_image "zstd"                     # for zstd compression of initrd
+}
+
+function post_family_tweaks_bsp__retroidpocket-rp5_bsp_firmware_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "info"
+	declare file_added_to_bsp_destination # will be filled in by add_file_from_stdin_to_bsp_destination
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/retroidpocket-rp5-firmware" <<- 'FIRMWARE_HOOK'
+		#!/bin/bash
+		[[ "$1" == "prereqs" ]] && exit 0
+		. /usr/share/initramfs-tools/hook-functions
+		for f in /lib/firmware/qcom/sm8250/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+		add_firmware "qcom/a650_sqe.fw" # extra one for dpu
+		add_firmware "qcom/a650_gmu.bin" # extra one for gpu
+	FIRMWARE_HOOK
+	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
+}
+
+## Modules, required to boot, add them to initrd
+function post_family_tweaks_bsp__retroidpocket-rp5_bsp_modules_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: modules in initrd" "info"
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/modules" <<- 'EXTRA_MODULES'
+		panel-ddic-ch13726a
+	EXTRA_MODULES
+}
+
+# armbian-firstrun waits for systemd to be ready, but snapd.seeded might cause it to hang due to wrong clock.
+# if the battery runs out, the clock is reset to 1970. This causes snapd.seeded to hang, and armbian-firstrun to hang.
+function pre_customize_image__disable_snapd_seeded() {
+	[[ "${DISTRIBUTION}" != "Ubuntu" ]] && return 0 # only needed for Ubuntu
+	display_alert "Disabling snapd.seeded" "${BOARD}" "info"
+	chroot_sdcard systemctl disable snapd.seeded.service "||" true
+}

config/boards/retroidpocket-rpmini.csc

@@ -0,0 +1,123 @@
+# Retroid Pocket RPMini Configuration
+declare -g BOARD_NAME="Retroid Pocket RPMini"
+declare -g BOARD_MAINTAINER="tjstyle"
+declare -g BOARDFAMILY="sm8250"
+declare -g KERNEL_TARGET="current"
+declare -g EXTRAWIFI="no"
+declare -g MODULES="panel_ddic_ch13726a"
+declare -g BOOTCONFIG="none"
+
+declare -g UEFI_GRUB_TERMINAL="gfxterm" # Use graphics in grub, for the Armbian wallpaper.
+declare -g GRUB_CMDLINE_LINUX_DEFAULT="clk_ignore_unused pd_ignore_unused arm64.nopauth efi=noruntime fbcon=rotate:1 console=ttyMSM0,115200n8"
+declare -g BOOT_FDT_FILE="qcom/sm8250-retroidpocket-rpmini.dtb"
+
+declare -g SERIALCON="${SERIALCON:-tty1}"
+
+enable_extension "grub"
+enable_extension "grub-with-dtb" # important, puts the whole DTB handling in place.
+
+# declare -g BOOT_LOGO=desktop
+
+# Use the full firmware, complete linux-firmware plus Armbian's
+declare -g BOARD_FIRMWARE_INSTALL="-full"
+
+function retroidpocket-rpmini_is_userspace_supported() {
+	[[ "${RELEASE}" == "bookworm" ]] && return 0
+	[[ "${RELEASE}" == "jammy" ]] && return 0
+	[[ "${RELEASE}" == "noble" ]] && return 0
+	[[ "${RELEASE}" == "trixie" ]] && return 0
+	return 1
+}
+
+function pre_customize_image__retroidpocket-rpmini_alsa_ucm_conf() {
+	if ! retroidpocket-rpmini_is_userspace_supported; then
+		return 0
+	fi
+
+	display_alert "Add alsa-ucm-conf for ${BOARD}" "${RELEASE}" "warn"
+	(
+		cd "${SDCARD}/usr/share/alsa" || exit 6
+		curl -L "https://github.com/RetroidPocket/alsa-ucm-conf/archive/refs/heads/rp/v1.2.13.tar.gz" | tar xvzf - --strip-components=1
+	)
+}
+
+function post_family_tweaks_bsp__retroidpocket-rpmini_add_services() {
+	if ! retroidpocket-rpmini_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Add services" "info"
+
+	# Bluetooth MAC addr setup service
+	mkdir -p $destination/usr/local/bin/
+	mkdir -p $destination/usr/lib/systemd/system/
+	install -Dm655 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.sh $destination/usr/local/bin/
+	install -Dm644 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.service $destination/usr/lib/systemd/system/
+
+	# Haptic and Gamepad rules
+	install -Dm644 $SRC/packages/bsp/retroidpocket/90-feedbackd-spmi-haptics.rules $destination/etc/udev/rules.d/90-feedbackd-spmi-haptics.rules
+	install -Dm644 $SRC/packages/bsp/retroidpocket/99-ignore-gamepad.rules $destination/etc/udev/rules.d/99-ignore-gamepad.rules
+}
+
+function post_family_tweaks__retroidpocket-rpmini_enable_services() {
+	if ! retroidpocket-rpmini_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Enable services" "info"
+
+	chroot_sdcard systemctl enable bt-fixed-mac.service
+	return 0
+}
+
+function post_family_config__retroidpocket-rpmini_extra_packages() {
+	if ! retroidpocket-rpmini_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "Setting up extra packages for ${BOARD}" "${RELEASE}" "info"
+	add_packages_to_image "bluez" "bluetooth"        # for bluetooth stuff
+	add_packages_to_image "mtools"                   # for access to the EFI partition
+	add_packages_to_image "zstd"                     # for zstd compression of initrd
+}
+
+function post_family_tweaks_bsp__retroidpocket-rpmini_bsp_firmware_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "info"
+	declare file_added_to_bsp_destination # will be filled in by add_file_from_stdin_to_bsp_destination
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/retroidpocket-rpmini-firmware" <<- 'FIRMWARE_HOOK'
+		#!/bin/bash
+		[[ "$1" == "prereqs" ]] && exit 0
+		. /usr/share/initramfs-tools/hook-functions
+		for f in /lib/firmware/qcom/sm8250/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+		add_firmware "qcom/a650_sqe.fw" # extra one for dpu
+		add_firmware "qcom/a650_gmu.bin" # extra one for gpu
+	FIRMWARE_HOOK
+	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
+}
+
+## Modules, required to boot, add them to initrd
+function post_family_tweaks_bsp__retroidpocket-rpmini_bsp_modules_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: modules in initrd" "info"
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/modules" <<- 'EXTRA_MODULES'
+		panel-ddic-ch13726a
+	EXTRA_MODULES
+}
+
+# armbian-firstrun waits for systemd to be ready, but snapd.seeded might cause it to hang due to wrong clock.
+# if the battery runs out, the clock is reset to 1970. This causes snapd.seeded to hang, and armbian-firstrun to hang.
+function pre_customize_image__disable_snapd_seeded() {
+	[[ "${DISTRIBUTION}" != "Ubuntu" ]] && return 0 # only needed for Ubuntu
+	display_alert "Disabling snapd.seeded" "${BOARD}" "info"
+	chroot_sdcard systemctl disable snapd.seeded.service "||" true
+}