AsyncTCP

A fork of the AsyncTCP library by @me-no-dev for ESPHome.

Async TCP Library for ESP32 Arduino

This is a fully asynchronous TCP library, aimed at enabling trouble-free, multi-connection network environment for Espressif's ESP32 MCUs.

This library is the base for ESPAsyncWebServer

AsyncClient and AsyncServer

The base classes on which everything else is built. They expose all possible scenarios, but are really raw and require more skills to use.

Changes in this fork

• All improvements from ESPHome fork
• Reverted back library.properties for Arduino IDE users
• Arduino 3 / ESP-IDF 5 compatibility
• IPv6 support

Coordinates

mathieucarbou/AsyncTCP @ ^3.2.4

Important recommendations

Most of the crashes are caused by improper configuration of the library for the project. Here are some recommendations to avoid them.

1. Set the running core to be on the same core of your application (usually core 1) -D CONFIG_ASYNC_TCP_RUNNING_CORE=1
2. Set the stack size appropriately with -D CONFIG_ASYNC_TCP_STACK_SIZE=16384. The default value of 16384 might be too much for your project. You can look at the MycilaTaskMonitor project to monitor the stack usage.
3. You can change if you know what you are doing the task priority with -D CONFIG_ASYNC_TCP_PRIORITY=10. Default is 10.
4. You can increase the queue size with -D CONFIG_ASYNC_TCP_QUEUE_SIZE=128. Default is 64.
5. You can decrease the maximum ack time -D CONFIG_ASYNC_TCP_MAX_ACK_TIME=3000. Default is 5000.

I personally use the following configuration in my projects:

  -D CONFIG_ASYNC_TCP_MAX_ACK_TIME=3000
  -D CONFIG_ASYNC_TCP_PRIORITY=10
  -D CONFIG_ASYNC_TCP_QUEUE_SIZE=128
  -D CONFIG_ASYNC_TCP_RUNNING_CORE=1
  -D CONFIG_ASYNC_TCP_STACK_SIZE=4096