Linux led controller for Logitech G213, G410, G413, G512, G513, G610, G810, G910 and GPRO Keyboards.
- G213 Prodigy
- G410 Atlas Spectrum
- G413 Carbon
- G512 Carbon
- G513 Carbon
- G610 Orion Brown
- G610 Orion Red
- G810 Orion Spectrum
- G910 Orion Spark
- G910 Orion Spectrum
- GPRO
g213-led --help
g410-led --help
g413-led --help
g512-led --help
g513-led --help
g610-led --help
g810-led --help
g910-led --help
gpro-led --help
g810-led --help-keys
g810-led --help-effects
g810-led --help-samples
g810-led -p /etc/g810-led/profile # Load a profile
g810-led -k logo ff0000 # Set color of a key
g810-led -a 00ff00 # Set color of all keys
g810-led -g fkeys ff00ff # Set color of a group of keys
g810-led -s color # Set keyboard power on effect
g810-led -fx color keys 00ff00 # Set fixed color effect
g810-led -fx breathing logo 00ff00 0a # Set breathing effect
g810-led -fx cycle all 0a # Set color cycle effect
g810-led -fx hwave keys 0a # Set horizontal wave effect
g810-led -fx vwave keys 0a # Set vertical wave effect
g810-led -fx cwave keys 0a # Set center wave effect
g810-led -an 000000 # Set color of all key with no action
g810-led -gn modifiers ff0000 # Set color of a group with no action
g810-led -kn w ff0000 # Set color of a key with no action
g810-led -kn a ff0000 # Set color of a key with no action
g810-led -kn s ff0000 # Set color of a key with no action
g810-led -kn d ff0000 # Set color of a key with no action
g810-led -c # Commit all changes
g610-led -a 60 # Set intensity of all keys
g610-led -k logo ff # Set intensity of a key
g610-led -g fkeys aa # Set intensity of a group of keys
g213-led -a 00ff00 # Set all keys green
g213-led -r 1 ff0000 # Set region 1 red
g810-led -pp < profilefile # Load a profile
echo -e "k w ff0000\nk a ff0000\nk s ff0000\nk d ff0000\nc" | g810-led -pp # Set multiple keys
Start by retrieving the VendorID and the ProductID of your keyboard using lsusb.
lsusb
Sample return :
Bus 001 Device 001: ID 046d:c331 Logitech, Inc.
In this sample VendorID is 046d and ProductID is c331. Now test your keyboard with all supported protocol :
g810-led -dv 046d -dp c331 -tuk 1 -a 000000
If your keyboard set all key to off you have found the protocol (1), if not continue.
g810-led -dv 046d -dp c331 -tuk 2 -a 000000
If your keyboard set all key to off you have found the protocol (2), if not continue.
g810-led -dv 046d -dp c331 -tuk 3 -a 000000
If your keyboard set all key to off you have found the protocol (3), if not, need new dump.
Include in implementing source files.
#include <g810-led/Keyboard.h>To link, simply provide -lg810-led to the build flags.
To build the g810-led application as a dynamically-linked variant, run the target:
make bin-linked
Dumps of keyboards are now stored in a separate project to preserve a small download size of this project. You can find them here : https://github.com/MatMoul/g810-led-resources