Home
This repository is managed by FMCHUB. It provides auxiliary files for building system according to ANSI/VITA 57 FPGA Mezzanine Card (FMC) Standard with Altium Designer.
Schematic and PCB footprint library for Altium Designer (Version 17). The demoboard shows schematics and footprints of the components. For now, 3D models of LPC and HPC connectors are equal.
2.1 CC-HPC-10
FMC High-pin count connector, 400 I/Os, female, mounted on carrier card
Footprints:
ASP-134486-01: CC-HPC-10, 1.27mm PITCH SOCKET ARRAY ASSEMBLY, FEMALE, VITA 57 CONNECTOR
2.2 CC-LPC-10
FMC Low-pin count connector, 160 I/Os, female, mounted on carrier card
Footprints:
ASP-134603-01: CC-LPC-10, 1.27mm PITCH SOCKET ARRAY ASSEMBLY, FEMALE, VITA 57 CONNECTOR
2.3 Fiducial_Mark
Fiducial mark, width 1mm, clearance 3mm,
fiducial marks are not defined by the standard, but support assembly
Type: Standard, No BOM
Footprints:
FIDUCIAL_MARK_DIAMOND: fiducial mark, diamond, 1 mm squared, 3 mm keep-out
FIDUCIAL_MARK_ROUND: fiducial mark, round, 1 mm diameter, 3 mm keep-out
2.4 MC-HPC-10
FMC High-pin count connector, 400 I/Os, male, mounted on mezzanine card
Footprints:
ASP-134488-01: MC-HPC-10, 1.27mm PITCH TERMINAL ARRAY ASSEMBLY, MALE, VITA 57 CONNECTOR
2.5 MC-LPC-10
FMC Low-pin count connector, 160 I/Os, male, mounted on mezzanine card
Footprints:
ASP-134604-01: MC-LPC-10, 1.27mm PITCH TERMINAL ARRAY ASSEMBLY, MALE, VITA 57 CONNECTOR
2.6 Mounting_Hole_2.2mm
Mounting hole, hole size 2.2 mm
Mounting holes for connecting standoffs and screws of ruggedized modules
Type: Standard, No BOM
Footprints:
Mounting_Hole_2.2mm: Mounting Hole, hole 2.2mm
Mounting_Hole_PLATED_2.2mm: Mounting Hole, hole 2.2mm, diameter 2.6mm, Keepout R 1.35mm, plated
2.7 Mounting_Hole_2.7mm
Mounting hole, hole size 2.7 mm
Basic mounting holes for connecting standoffs and screws
Type: Standard, No BOM
Footprints:
Mounting_Hole_2.7mm: Mounting Hole, hole 2.7mm
Mounting_Hole_PLATED_2.7mm: Mounting Hole, hole 2.7mm, diameter 5.4mm, Keepout R 2.9mm, plated
Mounting_Hole_Plated_2.7mm-COVERED: Mounting Hole, hole 2.7mm, diameter 5.4mm, Keepout R 2.9mm, plated, covered with solder mask
Mounting_Hole_Plated_2.7mm - d3.1mm: Mounting Hole, hole 2.7mm, diameter 3.1mm, Keepout R 3.2mm, plated
2.8 Primary_Thermal_Interface
Exposed copper pads for thermal interface of conduction cooled FMC modules (single width),
the primary thermal interface is placed in region 1 and 3 of the module.
Type: Standard (No BOM)
Footprints:
Primary_Thermal_Interface: Primary thermal interfaces for FMC module
2.9 Secondary_Thermal_Interface
Exposed copper pads for thermal interface of conduction cooled FMC modules (single width),
the (optional) secondary thermal interface spans region 1 to 3 of the module.
Type: Standard (No BOM)
Footprints:
Secondary_Thermal_Interface: Secondary thermal interfaces for FMC module
3.1 ANSI/VITA 57.4-2016 FMC+ connectors