Skip to content

CIM interfaces for GridLAB-D and OpenDSS; data and test scripts for the PNNL taxonomy feeders, EPRI large-circuit and DPV test feeders, and some IEEE test feeders.

Notifications You must be signed in to change notification settings

GRIDAPPSD/Powergrid-Models

Repository files navigation

GridAPPS-D Feeder Models

Copyright (c) 2017-2024, Battelle Memorial Institute

This repository contains distribution feeder models for the GridAPPS-D project and other use cases in these formats:

from these sources:

Platform Feeder Characteristics

Eleven feeder models are tested routinely for use in GridAPPS-D, summarized in the table below:

Name Features Houses Buses Nodes Branches Load Origin
ACEP_PSIL 480-volt microgrid with PV, wind and diesel No 8 24 13 0.28 UAF
EPRI_DPV_J1 1800 kW PV in 11 locations No 3434 4245 4901 9.69 EPRI DPV
IEEE13 Added CIM sampler No 22 57 51 3.44 IEEE (mod)
IEEE13_Assets Uses line spacings and wires No 16 41 40 3.58 IEEE (mod)
IEEE13_OCHRE Added 40 service transformers and triplex loads Yes 74 160 75 0.24 IEEE (mod)
IEEE37 Delta system No 39 117 73 2.59 IEEE
IEEE123 Includes switches for reconfiguration No 130 274 237 3.62 IEEE
IEEE123_PV Added 3320 kW PV in 14 locations Yes 214 442 334 0.27 IEEE/NREL
IEEE8500 Large model, balanced secondary loads Yes 4876 8531 6103 11.98 IEEE
IEEE8500_3subs Added 2 grid sources and DER Yes 5294 9499 6823 9.14 GridAPPS-D
R2_12_47_2 Supports approximately 4000 houses Yes 853 1631 1086 6.26 PNNL
Transactive Added 1281 secondary loads to IEEE123 Yes 1516 3051 2812 3.92 GridAPPS-D

Revised Build Instructions

This version has been rebased on the CIM-Graph, CIM-Builder, and CIM-Loader libraries instead of the CIMHub Java+Python package

TODO: New Build Instructions

Directory Contents

This repository contains:

  • Archive: Leftover fragments to be removed
  • Models: Transmission and distribution models in CIM format with source files used to create those models
  • Ontology: Enterprise Architect and CIMTool artifacts for the CIM profiles used by GridAPPS-D
  • Platform: Models populated with houses and measurements for simulation in the GridAPPS-D platform

Attribute and Disclaimer:

This software was created under a project sponsored by the U.S. Department of Energy’s Office of Electricity, an agency of the United States Government. Neither the United States Government nor the United States Department of Energy, nor Battelle, nor any of their employees, nor any jurisdiction or organization that has cooperated in the development of these materials, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness or any information, apparatus, product, software, or process disclosed, or represents that its use would not infringe privately owned rights.

Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

PACIFIC NORTHWEST NATIONAL LABORATORY

operated by BATTELLE for the

UNITED STATES DEPARTMENT OF ENERGY

under Contract DE-AC05-76RL01830

About

CIM interfaces for GridLAB-D and OpenDSS; data and test scripts for the PNNL taxonomy feeders, EPRI large-circuit and DPV test feeders, and some IEEE test feeders.

Resources

Stars

Watchers

Forks

Packages

No packages published