MTB CAT1 Peripheral Driver Library v3.4.0

Please refer to the README.md and the
PDL API Reference Manual
for a complete description of the Peripheral Driver Library.

Some restrictions apply to the PSoC 64 devices configuration. Please refer to PRA (Protected Register Access) driver documentation for the details.

Implementation Details

Cryptolite Support for ECDSA verify for HASHZERO message added.
CAT1C:Enabled wait-states API.
Glitch filter support added for TCPWM version 3 and above.
CAT1A: Added new 80-m-csp package mpns in PSoC 6-256K family. MPNs starting with CY8C6144FMI, CY8C6244FMI.

Added Personalities : smartio-4.0.cypersonality
Updated Personalities : bakclk-3.0.cypersonality, timerclk-3.0.cypersonality, tickclk-3.0.cypersonality, sysclock-3.0.cypersonality, power_v3-1.0.cypersonality, power_v2-1.0.cypersonality, pin-3.0.cypersonality, pclk_v2-1.0.cypersonality,
mfclk-3.0.cypersonality, hfclk-3.0.cypersonality, hfclk_v2-1.0.cypersonality, eco-3.0.cypersonality, uart-3.0.cypersonality, tdm-1.1.cypersonality, smif_v2-1.0.cypersonality, smartio-3.0.cypersonality, sd_host-1.0.cypersonality, pwm_v2-1.0.cypersonality, pdm_pcm_v2-3.0.cypersonality, mcwdt-3.0.cypersonality, i2c-4.0.cypersonality, canfd-3.0.cypersonality

The ModusToolbox Device Configurator can not create the designs targeting the obsolete PSoC 6 part numbers.

Below is a list of PSoC 6 part numbers obsoleted in psoc6pdl release-v1.6.0, with the suggested next best alternative:

CAT1A: On soft reset, user need to reset back up domain using Cy_SysLib_ResetBackupDomain() to receive Cy_RTC_CenturyInterrupt() callback on Century roll over.
On building with tools 2.2, user get warning related to the older version of tools used. To avoid this warning, user is advised to migrate to newer tools version or keep working with previous version of this library. The warning generated is as follows:
- #warning "(Library) The referenced 'device support library' contains newer content than is supported. Either downgrade the version of the 'device support library' referenced or upgrade the version of tools being used
Design configuration will not be auto migrated from smartio-3.0.cypersonality to smartio-4.0.cypersonality. So, existing projects should use smartio-3.0.cypersonality. New projects can make use of smartio-4.0.cypersonality which includes additional improvements.
CAT1C: This release does not support D-CACHE on CAT1C platform

See the Changelog section of each Driver in the PDL API Reference for all fixes and updates.

This version of PDL was validated for compatibility with the following Software and Tools: