As of 060710 (yes, 2006)

Upload the legacy software

SDK/SRCS/INSTALL DRAGON SDK/Compile Installer.bat

@@ -0,0 +1 @@
+".\TOOLS\Inno Setup 5\ISCC.exe" "Dragon SDK 2.1.iss"

SDK/SRCS/INSTALL DRAGON SDK/OUTPUT/Dragon SDK 2.1.0.49/Dragon SDK 2.1.0.49.md5

@@ -0,0 +1,4 @@
+d7d96f3a52cfe2c1c7b72dd2275efa16 *buildnum.txt
+4e7d1f9f067e6253580967dc1e47973d *setup_Dragon_SDK_21.exe
+caeca9c50b230f64465441011a996623 *setup_Dragon_SDK_21-0.bin
+37cbf5357ecabce9c7d97cf207c9e949 *setup_Dragon_SDK_21-1.bin

SDK/SRCS/INSTALL DRAGON SDK/OUTPUT/Dragon SDK 2.1.0.49/Dragon SDK 2.1.0.49.sfv

@@ -0,0 +1,6 @@
+; Generated by WIN-SFV32 v1.0
+; (Compatible: Total Commander 9.0a)
+buildnum.txt 6859C212
+setup_Dragon_SDK_21.exe FB83C093
+setup_Dragon_SDK_21-0.bin C14BE7DE
+setup_Dragon_SDK_21-1.bin DBCD341E

SDK/SRCS/INSTALL DRAGON SDK/OUTPUT/Dragon SDK 2.1.0.49/buildnum.txt

@@ -0,0 +1 @@
+2.1.0.49

SDK/SRCS/INSTALL DRAGON SDK/TOOLS/Aspi/README.TXT

@@ -0,0 +1,160 @@
+Adaptec Inc., Copyright (c) 2002
+
+ASPI Overview
+=======================================================
+I  ) Operating Systems and ASPI Files Installed
+II ) Changes between v 4.60 and v 4.71
+III) GetASPI32Buffer Addendum
+IV ) How to increase the non-paged pool size
+V  ) Windows XP Support
+VI ) Installation of ASPI
+VII) Status Codes for ASPIINST.EXE
+
+I. Operating System ASPI Files Installed
+========================================================
+Microsoft Windows NT 4.0  wnaspi32.dll, aspi32.sys
+                          winaspi.dll, wowpost.exe
+
+Microsoft Windows 2000    wnaspi32.dll, aspi32.sys
+                          winaspi.dll, wowpost.exe
+
+Microsoft Windows 98      wnaspi32.dll, apix.vxd
+
+Microsoft Windows Me      wnaspi32.dll, apix.vxd
+
+Microsoft Windows XP      wnaspi32.dll, aspi32.sys
+
+
+II. Changes Between v 4.60 and v 4.71
+=======================================================
+1)   It is important the following pairs of files have matching version numbers:
+     (you may not have all of these files; which files you have in your PC depends
+     on which Windows platform is in your PC)
+
+     a)   wnaspi32.dll  and  aspi32.sys
+     b)   wnaspi32.dll  and  apix.vxd
+     c)   winaspi.dll   and  wowpost.exe
+
+     It is not important, for example, for wnaspi32.dll to have matching version
+     number with winaspi.dll. Disregard any such error message from aspichk.exe.
+     Also disregard any error message from aspichk.exe regarding files not present.
+
+2)   Windows 2000 and Windows NT4.0 Only:
+     Command tagged queueing is enabled by default in v4.71; however, this is 
+     functional only if your Host Bus Adapter (HBA) supports tagged queueing.
+     Check with your HBA vendor for HBA capabilities.
+
+3)   Windows 2000 Only:
+     aspi32.sys (aspi2k.sy_ before install) remains a non-Plug-and-Play driver in Windows 2000.
+     Once loaded, aspi32.sys will not unload. To get aspi32.sys unloaded, delete the file 
+     \winnt\system32\drivers\aspi32.sys  and reboot PC.
+
+4)   Previous versions of aspi32.sys for Windows 2000 and XP may not return the proper 
+     Maximum Number of Targets (HA_MaxTargets) in reponse to Host Adapter Inquiry
+     (HA_INQUIRY). This has been corrected.
+
+III. GetASPI32Buffer Addendum
+=========================================================================
+FYI
+
+If you have experienced a failure to allocate a buffer (GetASPI32Buffer),
+you may need to do one or both of the following:
+
+1)  increase the non-paged pool size on your PC (allocate more RAM to 
+    non-paged pool),
+2)  physically add more RAM to your PC.
+3)  decrease the buffer size requested.
+
+The first thing to do is to increase the non-paged pool size.
+
+IV) How to increase the non-paged pool size ?
+=============================================
+
+ 1) Run  regedt32.exe ( click  Start->Run and type regedt32 ),
+ 2) Edit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\NonPagedPoolSize
+    This parameter is a REG_DWORD (32 bits). 
+
+    NOTE : If it is set to 0x00, the default minimum portion of RAM is allocated to
+           non-paged pool.
+
+ 3) Set this parameter to 0xffffffff (the maximum portion of RAM is allocated to
+    non-paged pool.) Reboot the PC and try the application again.
+
+    NOTE : If GetASPI32Buffer still fails; you may not have enough
+    physical RAM in the PC, and you may need to physically
+    install additional RAM.
+
+If GetASPI32Buffer now works, then gradually decrease the non-paged pool size
+( by specifying the amount of RAM allocated to non-paged pool ) to optimize.
+
+Tips
+-------------------------------------------------------------
+Set the NonPagedPoolSize to 0x00100000 for 1 MegaBytes;
+  0x00200000 for 2 MegaBytes;  etc.
+
+See the Microsoft Developer Network (MSDN) article Q126402 (www.microsoft.com)
+for more information regarding setting the non-paged pool size.
+
+
+V. Windows XP Support
+===========================================================
+
+Contents:
+-----------------------------------------------------------
+install.bat     installation batch file
+reg_xp.exe      registry modification utility
+aspixp.sys      32-bit ASPI driver ( v 4.71.2 )
+wnaspixp.dll    32-bit ASPI DLL    ( v 4.71.2 )
+aspi64.sys      64-bit ASPI driver ( v 4.70.8 )
+wnaspi64.dll    64-bit ASPI DLL    ( v 4.70.8 )
+
+
+VI. Installation of ASPI
+============================================================
+1. Run INSTALL.BAT with the target operating system
+   command line option specified:
+
+   X86  ( for Windows 98/ME/NT/2000 )
+   XP32 ( for Windows XP 32-bit     )
+   XP64 ( for Windows XP 64-bit     )
+
+   e.g. "INSTALL.BAT X86"
+
+2. INSTALL.BAT will prompt you to specify which operating
+   system to install for if you did not specify one in Step 1).
+
+   a)  If you are installing for X86 systems for either
+       Windows 98/ME/NT/2000 then ASPIINST.EXE will be invoked
+       and the rest of the installation process will be carried
+       out.
+   b)  If you are installing for X86 or Itanium systems the
+       batch file will invoke REG_XP.EXE to make the necessary
+       registry entries and then copy the operating system
+       specific files to the appropriate location. The operating
+       system path is determined by the environment variable
+       %windir%.
+
+   For Win XP 32-bit:
+    ASPIXP.SYS    will be copied to %windir%\system32\drivers\ASPI32.SYS
+    WNASPIXP.DLL  will be copied to %windir%\system32\WNASPI32.DLL
+
+   For Win XP 64-bit:
+    ASPI64.SYS    will be copied to %windir%\system32\drivers\ASPI32.SYS
+    WNASPI64.DLL  will be copied to %windir%\system32\WNASPI32.DLL
+
+3. Reboot the system to enable the ASPI driver.
+
+VII) Status Codes for ASPIINST.EXE
+===========================================================
+The use of the C programming convention, EXIT, has been
+removed completely from the source. EXIT has some
+restrictions which RETURN does not.
+
+EXIT allows for only the low order byte of the status code
+to be accessible to the calling process. The status value
+is available to the operating system batch command ERRORLEVEL
+but is represented by one of two constants EXIT_SUCCESS (0)
+or EXIT_FAILURE (1).
+
+
+

SDK/SRCS/INSTALL DRAGON SDK/TOOLS/Aspi/aspi_you.txt

@@ -0,0 +1,44 @@
+
+============================================================================
+  ASPI_YOU v1.5                                     http://www.nu2.nu/aspi
+============================================================================
+
+- INTRODUCTION -------------------------------------------------------------
+
+        ASPI_YOU, Shows your devices found by ASPI, v1.5
+        Copyright (c) 2002 Bart Lagerweij. All rights reserved.
+        Some major bug fixing done by Henk de Jong.
+        This program is free Software; you can redistribute it under the 
+        terms of the NU2 License.
+        (see nu2lic.txt or http://www.nu2.nu/license/).
+
+        ASPI_YOU lists all devices found through ASPI32 and returns an 
+        errorlevel.
+
+        Errorlevel returned:
+        --------------------------------------
+        255     Failed to load ASPI32 library 
+        254     Failed to get ASPI32 functions 
+        253     No host adapters found
+        0       Success 
+
+- INSTALLATION -------------------------------------------------------------
+
+        You don't install it.
+        Just copy aspi_you.exe somewhere on your PC and your done.
+
+- CONTACT THE AUTHORS ------------------------------------------------------
+
+        http://www.nu2.nu/contact/bart
+        http://www.nu2.nu/contact/henk
+
+- VERSION HISTORY ----------------------------------------------------------
+
+        v1.0  - First public release
+        v1.1  - Minor bug fix. Added -b switch
+        v1.2  - Minor bug fix. Added a check, when number of host adapters 
+                is 0 errorlevel 253 is returned. This happens when running
+                windows XP and you have adaptec wnaspi32.dll v4.57
+        v1.3  - Minor bug fix. Added inquiry status check.
+        v1.5  - Windows XP Bug fix. Fixed by Henk de Jong.
+                Incorrect sense lenght and buffer.