NativeCAM for LinuxCNC - realtime CAM

NativeCAM as a deb package can now be used with new stable release of LinuxCNC (2.7.9) It will be automatically updated after changes are published.

DO NOT USE AS A NONDEB_SETUP ANYMORE

If not installed yet, follow instructions at https://forum.linuxcnc.org/40-subroutines-and-ngcgui/32891-use-nativecam-as-a-deb-package-now?limitstart=0#94274

Type : 'ncam -h' Important readme files are catalogs/customize and catalogs/translating

1. Stand alone mode

---

1. Using the command : 'ncam' will create and use ~/nativecam directory and copy support files and links in the sub-directory ncam However it is not meant to be usefull unless LinuxCNC was/is loaded with the right SUBROUTINE_PATH except to explore it's features

2. Embedded

---

1. Use with any of the supplied examples from LinuxCNC Configuration Selector

2. To use with your own inifile, it must first be edited. From a normal user terminal, change directory to the one that contains your inifile Using the command : ncam -i(inifilename) -c('mill' | 'plasma' | 'lathe') will automatically create a backup and modify your file. It will also prepare the sub-directory with needed files and links. If you use axis and -t option it will be embedded in a tab

3. Start LinuxCNC normally with this command : linuxcnc inifilename

4. Open an example project

5. Tutorials

---

1. Use menu help->NativeCAM on YouTube

   or follow this link

   https://www.youtube.com/channel/UCjOe4VxKL86HyVrshTmiUBQ

2. Translation

---

Available French (fr) and German (de)