"hidden menus" key combinations
ℹ️ Red Engineering Menu/Service Mode menu can always be entered. GreenEngineering Menu and other functions are only available AFTER Development Mode is enbaled on unit. This is done by M.I.B during installation. Hence they will be available after M.I.B installation.
ℹ️ Depending on brand and car model buttons will be placed different around the screens. But they will always be clearly labled.
| Function | Shortcut | Additional Info |
|---|---|---|
| Service Mode menu |
MENU for 3 seconds |
|
| Testmode menu |
MENU for 10 seconds |
DEV Mode has to be enabled 📹LINK |
| Screenshot to SD card |
MEDIA for 3 seconds |
DEV Mode has to be enabled - “bling” sound confirms screenshot |
| Reboot |
Volume Wheel for 10 seconds |
“hard” reboot some changes to coding or adaptions might be lost, especially when using M.I.B or MIB-Toolbox |
ℹ️ Please note: You have to press these key combinations while you are on HOME screen!
| Model | REM (Red Engineering Menu) | GEM (Green Engineering Menu) | Reboot | Screenshot |
|---|---|---|---|---|
| A4/A5/Q5 2017-2020 |  |
 |
 |
 |
| A4 (8W) manual geaerbox |  |
 |
 |
 |
| TT/R8/A3 -2016/2020 |  |
 |
 |
 |
| A3 2012-2016 |  |
 |
 |
|
| Q7 MY 2014-2020 |  |
 |
 |
 |
| A6/A7 MY 2015-2018 |  |
 |
 |
 |
ℹ️ Please note: Follow key order press button (1) and button (2) quickly after
Alternatively you can also both press buttons at the same time for ~5s.
ℹ️ Please note: You have to press these key combinations while you are on HOME screen!
ℹ️ Key combination for screenshot was not discovered yet.
ℹ️ Please note: You have to press these key combinations while you are on HOME screen!
ℹ️ Key combination for screenshot was not discovered yet.
ℹ️ Key combination for screenshot was not discovered yet.
Screenshots are directly copied to root of SD card
The screenshots are saved on the hard disk of the MMI/PCM unit. In order to copy the screenshots to SD card 1, a function in GEM has to be used.
Carry out the following steps:
- Select "production"
- Select "debugging_prod"
- Select "Copy MMX / RCC CoF, ErL & ScS (only AU) to SD1"
- wait until the copying process is finished ("Copying files to ... done")
The screenshots (and log files) are now on the card in SD1, in a directory (e.g. 01_Export_20160913_115634).