GIS Extension for NetLogo

This package contains the NetLogo GIS extension.

Building

sbt package

If compilation succeeds, gis.jar will be created.

Using

This extension adds GIS (Geographic Information Systems) support to NetLogo. It provides the ability to load vector GIS data (points, lines, and polygons), and raster GIS data (grids) into your model.

The extension supports vector data in the form of ESRI shapefiles and GeoJSON files. The shapefile (.shp) and GeoJSON (.geojson) formats are the most common format for storing and exchanging vector GIS data. The extension supports raster data in the form of ESRI ASCII Grid files. The ASCII grid file (.asc or .grd) is not as common as the shapefile, but is supported as an interchange format by most GIS platforms.

How to use

In general, you first define a transformation between GIS data space and NetLogo space, then load datasets and perform various operations on them. The easiest way to define a transformation between GIS space and NetLogo space is to take the union of the "envelopes" or bounding rectangles of all of your datasets in GIS space and map that directly to the bounds of the NetLogo world. See GIS General Examples for an example of this technique.

You may also optionally define a projection for the GIS space, in which case datasets will be re-projected to match that projection as they are loaded, as long as each of your data files has an associated .prj file that describes the projection or geographic coordinate system of the data. If no associated .prj file is found, the extension will assume that the dataset already uses the current projection, regardless of what that projection is.

Once the coordinate system is defined, you can load datasets using gis:load-dataset. This primitive reports either a VectorDataset or a RasterDataset, depending on what type of file you pass it.

A VectorDataset consists of a collection of VectorFeatures, each one of which is a point, line, or polygon, along with a set of property values. A single VectorDataset may contain only one of the three possible types of features.

There are several things you can do with a VectorDataset: ask it for the names of the properties of its features, ask it for its "envelope" (bounding rectangle), ask for a list of all VectorFeatures in the dataset, search for a single VectorFeature or list of VectorFeatures whose value for a particular property is less than or greater than a particular value, or lies within a given range, or matches a given string using wildcard matching ("*", which matches any number of occurrences of any characters). If the VectorFeatures are polygons, you can also apply the values of a particular property of the dataset's features to a given patch variable.

For the common use case of converting a VectorDataset of points into a corresponding set of turtles with the same attributes, the gis:create-turtles-from-points primitive should be used.

There are also several things you can do with a VectorFeature from a VectorDataset: ask it for a list of vertex lists, ask it for a property value by name, ask it for its centroid (center of gravity), and ask for a subset of a given agentset whose agents intersect the given VectorFeature. For point data, each vertex list will be a one-element list. For line data, each vertex list will represent the vertices of a line that makes up that feature. For polygon data, each vertex list will represent one "ring" of the polygon, and the first and last vertex of the list will be the same. The vertex lists are made up of values of type Vertex, and the centroid will be a value of type Vertex as well.

For the common use case of spawning a number of turtles inside the bounds of a Polygon VectorFeature, the gis:create-turtles-inside-polygon primitive should be used. Though the gis:random-point-inside primitive can also be used if you don't want the spawned turtles to take on the attributes of the Polygon.

There are a number of operations defined for RasterDatasets as well. Mostly these involve sampling the values in the dataset, or re-sampling a raster to a different resolution. You can also apply a raster to a given patch variable, and convolve a raster using an arbitrary convolution matrix.

Code Example: GIS General Examples has general examples of how to use the extension

Code Example: GIS Gradient Example is a more advanced example of raster dataset analysis.

Known Issues

Values of type RasterDataset, VectorDataset, VectorFeature, and Vertex are not handled properly by export-world and import-world. To save datasets, you must use the gis:store-dataset primitive.

There is currently no way to distinguish positive-area "shell" polygons from negative-area "hole" polygons, or to determine which holes are associated with which shells.

Credits

The primary developer of the GIS extension was Eric Russell.

Significant updates, features, and fixes were added by James Hovet in 2020 and 2021.

The GIS extension makes use of several open-source software libraries. For copyright and license information on those, see the copyright section of the manual. The extension also contains elements borrowed from My World GIS.

This documentation and the example NetLogo models are in the public domain. The GIS extension itself is free and open source software. See the README.md file in the extension/gis directory for details.

We would love to hear your suggestions on how to improve the GIS extension, or just about what you're using it for. Post questions and comments at the NetLogo Users Group, or write directly to Eric Russell and the NetLogo team at [email protected]

Primitives

`gis:set-transformation`

gis:set-transformation *gis-envelope* *netlogo-envelope*

Defines a mapping between GIS coordinates and NetLogo coordinates. The gis-envelope and netlogo-envelope parameters must each be four-element lists consisting of:

[minimum-x maximum-x minimum-y maximum-y]

The scale of the transformation will be equal to the minimum of the scale necessary to make the mapping between the ranges of x values and the scale necessary to make the mapping between the ranges of y values. The GIS space will be centered in NetLogo space.

For example, the following two lists would map all of geographic (latitude and longitude) space in degrees to NetLogo world space, regardless of the current dimensions of the NetLogo world:

(list -180 180 -90 90)
(list min-pxcor max-pxcor min-pycor max-pycor)

However, if you're setting the envelope of the NetLogo world, you should probably be using set-world-envelope.

`gis:set-transformation-ds`

gis:set-transformation-ds *gis-envelope* *netlogo-envelope*

Does the same thing as set-transformation above, except that it allows the scale for mapping the range of x values to be different than the scale for y values. The "-ds" on the end stands for "different scales". Using different scales will cause distortion of the shape of GIS features, and so it is generally not recommended, but it may be useful for some models.

Here is an example of the difference between set-transformation and set-transformation-ds:


Using [set-transformation](#gisset-transformation), the scale along the x and y axis is the same, preserving the round shape of the Earth in this Orthographic projection.	Using [set-transformation-ds](#gisset-transformation-ds), the scale along the x axis is stretched so that the earth covers the entire NetLogo View, which in this case distorts the shape of the Earth.

`gis:set-world-envelope`

gis:set-world-envelope *gis-envelope*

A shorthand for setting the transformation by mapping the envelope of the NetLogo world to the given envelope in GIS space, while keeping the scales along the x and y axis the same. It is equivalent to:

set-transformation gis-envelope (list min-pxcor max-pxcor min-pycor max-pycor)

This primitive is supplied because most of the time you'll want to set the envelope of the entire NetLogo world, rather than just a part of it.

`gis:set-world-envelope-ds`

gis:set-world-envelope-ds *gis-envelope*

A shorthand for setting the transformation by mapping the envelope of the NetLogo world to the given envelope in GIS space, using different scales along the x and y axis if necessary. It is equivalent to:

set-transformation-ds gis-envelope (list min-pxcor max-pxcor min-pycor max-pycor)

See the pictures above for the difference between using equal scales for x and y coordinates and using different scales.

`gis:world-envelope`

gis:world-envelope

Reports the envelope (bounding rectangle) of the NetLogo world, transformed into GIS space. An envelope consists of a four-element list of the form:

[minimum-x maximum-x minimum-y maximum-y]

`gis:envelope-of`

gis:envelope-of *thing*

Reports the envelope (bounding rectangle) of thing in GIS coordinates. The thing may be an Agent, an AgentSet, a RasterDataset, a VectorDataset, or a VectorFeature. An envelope consists of a four-element list of the form:

[minimum-x maximum-x minimum-y maximum-y]

`gis:envelope-union-of`

gis:envelope-union-of *envelope1* *envelope2*
(gis:envelope-union-of *envelope1...*)

Reports an envelope (bounding rectangle) that entirely contains the given envelopes. An envelope consists of a four-element list of the form

[minimum-x maximum-x minimum-y maximum-y]

No assumption is made about the coordinate system of the arguments, though if they are not in the same coordinate system, results will be unpredictable.

`gis:load-coordinate-system`

gis:load-coordinate-system *file*

Loads a new global projection used for projecting or re- projecting GIS data as it is loaded from a file. The file must contain a valid Well-Known Text (WKT) projection description.

WKT projection files are frequently distributed alongside GIS data files, and usually have a ".prj" filename extension.

Relative paths are resolved relative to the location of the current model, or the user's home directory if the current model hasn't been saved yet.

The GIS extension does not support all WKT coordinate systems and projections. Only geographic ("GEOGCS") and projected ("PROJCS") coordinate systems are supported. For projected coordinate systems, only the following projections are supported:

Albers_Conic_Equal_Area
Lambert_Conformal_Conic_2SP
Polyconic
Lambert_Azimuthal_Equal_Area
Mercator_1SP
Robinson
Azimuthal_Equidistant
Miller
Stereographic
Cylindrical_Equal_Area
Oblique_Mercator
Transverse_Mercator
Equidistant_Conic
hotine_oblique_mercator
Gnomonic
Orthographic

See remotesensing.org for a complete list of WKT projections and their parameters.

`gis:set-coordinate-system`

gis:set-coordinate-system *system*

Sets the global projection used for projecting or re- projecting GIS data as it is loaded. The system must be either a string in Well-Known Text (WKT) format, or a NetLogo list that consists of WKT converted to a list by moving each keyword inside its associated brackets and putting quotes around it. The latter is preferred because it makes the code much more readable.

The same limitations on WKT support apply as described above in the documentation for load-coordinate-system

`gis:project-lat-lon`

gis:project-lat-lon *latitude* *longitude*

Report the position, in NetLogo space, of the given latitude and longitude pair according to the current map projection and transformation.

Like the location-of primitive, the reported xcor and ycor values are reported in a two-item list of [xcor ycor] and an empty list if the specified point is outside of the bounds of the netlogo world. For instance:

let location-of-abbey-road-studios gis:project-lat-lon 51.5320787 -0.1802646
let abbey-road-xcor item 0 location-of-abbey-road-studios
let abbey-road-ycor item 1 location-of-abbey-road-studios

Note that this primitive assumes that the given lat/lon pair are relative to the WGS84 datum/ellipsoid. If your data is based on GPS observations or GeoJson files, then your data is already relative to WGS84. If you are unsure about what datum your data is, then you should probably just assume it is WGS84 and use this primitive. However, if you do know that your data is relative to a different datum and that extra degree of precision is important to you (if you are, say, comparing values from location-of and project-lat-lon) then you should use project-lat-lon-from-ellipsoid and specify the desired datum's ellipsoid.

`gis:project-lat-lon-from-ellipsoid`

gis:project-lat-lon-from-ellipsoid *latitude* *longitude* *ellipsoid-radius* *ellipsoid-inverse-flattening*

Report the position, in NetLogo space, of the given latitude and longitude pair according to the current map projection and transformation and the given ellipsoid parameters.

Like the location-of primitive, the reported xcor and ycor values are reported in a two-item list of [xcor ycor] and an empty list if the specified point is outside of the bounds of the netlogo world.

The two defining parameters of a ellipsoid for the purposes of this primitive are the radius and the inverse flattening metric. These parameters can be easily found by examining either the WKT definition of a given projection/datum pair or the .prj file for the desired datum. For example, if you open the .prj file for a shapefile exported with the WGS66 datum in a text editor, you will see, somewhere in the file, this bit of text: DATUM["D_WGS_1966",SPHEROID["NWL_9D",6378145,298.25]]. If you look at the SPHEROID section of that text, the first number is the radius of that ellipoid and the second is the inverse flattening.

Once we have these numbers, we can project data that is relative to WGS66 like so:

let location gis:project-lat-lon my-lat my-lon 6378145 298.25

For more on earth ellipoids, see: https://en.wikipedia.org/wiki/Earth_ellipsoid

`gis:load-dataset`

gis:load-dataset *file*

Loads the given data file, re-projecting the data as necessary.

Relative paths are resolved relative to the location of the current model, or the user's home directory if the current model hasn't been saved yet.

For ESRI shapefiles and ESRI grid files, if there is a ".prj" file associated with the file, then load-datset will consult that file and re-project to the current global projection if needed. If no ".prj" file is found, then the data is assumed to use the same projection as the current global coordinate system.

For GeoJSON files, as per the most-recent specification (RFC 7946), the coordinate system for GeoJSON files is always WGS84 and will be imported accordingly.

Currently, three types of data file are supported:

".shp" (ESRI shapefile): contains vector data, consisting of points, lines, or polygons. When the target file is a shapefile, load-dataset reports a VectorDataset.
".asc" or ".grd" (ESRI ASCII grid): contains raster data, consisting of a grid of values. When the target file is an ASCII grid file, load-dataset reports a RasterDataset.
".geojson" or ".json" (GeoJSON): contains vector data similar to shapefiles and similarly reports a VectorDataset.

Note that not all aspects of the GeoJSON standard are supported. In particular, to be properly imported, a GeoJSON file must satisfy the following:

It only contain numeric or string data within the properties. all other json data will be stringified.
All "Features" within a "FeatureCollection" must be of the same shape type ("Point", "LineString", etc.) Additionally, if not all the "Features" in the "FeatureCollection" have the same set of property names, default values will be supplied where there are missing entries (0 for numbers and "" for strings.)
It must not use "GeometryCollection", which is not supported

Elevation/Z data is partially supported. For both .geojson and .shp files, single points with Z data will have their Z coordinate moved to a new "_Z" property that can be accessed with gis:property-value like any other property. Any Z information for other shape types will be discarded upon import.

`gis:store-dataset`

gis:store-dataset *dataset* *file*

Exports the given dataset to the given file.

For VectorDatasets, two file formats are supported, ESRI shapefiles and GeoJSON. If the given file name ends in ".geojson" or ".json", then the file will be exported as a GeoJSON file. If the file name ends in any other extension or no extension at all, the dataset will be exported as a shapefile and the associated file extensions will be supplied (".shp", ".prj", etc.)

For RasterDatasets, only ESRI ASCII grid files are supported and the associated file extensions will be automatically supplied.

Relative paths are resolved relative to the location of the current model, or the user's home directory if the current model hasn't been saved yet.

`gis:type-of`

gis:type-of *dataset*

Reports the type of the given GIS dataset: either "VECTOR" or "RASTER"

`gis:patch-dataset`

gis:patch-dataset *patch-variable*

Reports a new raster whose cells correspond directly to NetLogo patches, and whose cell values consist of the values of the given patch variable. This primitive is basically the inverse of apply-raster; apply-raster copies values from a raster dataset to a patch variable, while this primitive copies values from a patch variable to a raster dataset.

`gis:turtle-dataset`

gis:turtle-dataset *turtle-set*

Reports a new, point VectorDataset built from the turtles in the given agentset. The points are located at locations of the turtles, translated from NetLogo space into GIS space using the current coordinate transformation. And the dataset's properties consist of all of the turtle variables common to every turtle in the agentset.

`gis:link-dataset`

gis:link-dataset *link-set*

Reports a new, line VectorDataset built from the links in the given agentset. The endpoints of each line are at the location of the turtles connected by each link, translated from NetLogo space into GIS space using the current coordinate transformation. And the dataset's properties consist of all of the link variables common to every link in the agentset.

`gis:shape-type-of`

gis:shape-type-of *VectorDataset*

Reports the shape type of the given dataset. The possible output values are "POINT", "LINE", and "POLYGON".

`gis:property-names`

gis:property-names *VectorDataset*

Reports a list of strings where each string is the name of a property possessed by each VectorFeature in the given VectorDataset, suitable for use in gis:property-value.

`gis:feature-list-of`

gis:feature-list-of *VectorDataset*

Reports a list of all VectorFeatures in the given dataset.

`gis:vertex-lists-of`

gis:vertex-lists-of *VectorFeature*

Reports a list of lists of Vertex values. For point datasets, each vertex list will contain exactly one vertex: the location of a point. For line datasets, each vertex list will contain at least two points, and will represent a "polyline", connecting each adjacent pair of vertices in the list. For polygon datasets, each vertex list will contain at least three points, representing a polygon connecting each vertex, and the first and last vertices in the list will be the same.

`gis:centroid-of`

gis:centroid-of *VectorFeature*

Reports a single Vertex representing the centroid (center of gravity) of the given feature. For point datasets, the centroid is defined as the average location of all points in the feature. For line datasets, the centroid is defined as the average of the locations of the midpoints of all line segments in the feature, weighted by segment length. For polygon datasets, the centroid is defined as the weighted sum of the centroids of a decomposition of the area into (possibly overlapping) triangles. See this FAQ for more details on the polygon centroid algorithm.

`gis:random-point-inside`

gis:random-point-inside *VectorFeature*

Reports a single randomly-generated Vertex that lies within the given feature polygon. Generated points are uniformly distributed within the polygon and both polygon holes and multi-polygon features are supported.

; create 100 turtles randomly distributed throught a VectorFeature `vf`
crt 100 [
  let loc gis:location-of gis:random-point-inside vf
  set xcor item 0 loc
  set ycor item 1 loc
]

`gis:location-of`

gis:location-of *Vertex*

Reports a two-element list containing the x and y values (in that order) of the given vertex translated into NetLogo world space using the current transformation, or an empty list if the given vertex lies outside the NetLogo world.

`gis:set-property-value`

gis:set-property-value *VectorFeature* *property-name* *value*

Sets the value of the given property of the given VectorFeature. The type of the given value (string or number) must match the property type of the VectorFeature. This command may be used in conjunction with store-dataset to make changes to VectorFeatures and export them back as GIS datasets.

`gis:property-value`

gis:property-value *VectorFeature* *property-name*

Reports the value of the property with the given name for the given VectorDataset. The reported value may be a number, a string, or a boolean value, depending on the type of the field in the underlying data file.

For shapefiles, values from dBase CHARACTER and DATE fields are returned as strings, values from NUMBER and FLOAT fields are returned as numbers, and values from LOGICAL fields are returned as boolean values. MEMO fields are not supported. DATE values are converted to strings using ISO 8601 format (YYYY-MM-DD).

`gis:find-features`

gis:find-features *VectorDataset* *property-name* *specified-value*

Reports a list of all VectorFeatures in the given dataset whose value for the property property-name matches specified-value (a string or number).

For strings, value comparison is not case sensitive, and the wildcard character "*" will match any number of occurrences (including zero) of any character.

For numbers, beware that there are some numbers that are too big to be represented as an integer in NetLogo, so integer data imported into NetLogo may start to lose precision if they are larger than around 10^14.

`gis:find-one-feature`

gis:find-one-feature *VectorDataset* *property-name* *specified-value*

Reports the first VectorFeature in the dataset whose value for the property property-name matches the given string or number. Reports nobody if no matching VectorFeature is found.

For strings, Value comparison is not case sensitive, and the wildcard character "*" will match any number of occurrences (including zero) of any character. Features are searched in the order that they appear in the data file that was the source of the dataset, and searching stops as soon as a match is found.

For numbers, beware that there are some numbers that are too big to be represented as an integer in NetLogo, so if you want to be able to identify features based on a unique ID, keep the IDs you use on the relatively small side to play it safe. Any number that can fit into a 32 bit unsigned integer will work, but any larger than 10^14 and you could run into issues. (Helpfully, the NetLogo app will warn you if you try to type one of these too-large numbers into the editor if you want to check.)

`gis:find-less-than`

gis:find-less-than *VectorDataset* *property-name* *value*

Reports a list of all VectorFeatures in the given dataset whose value for the property property-name is less than the given value. String values are compared using case-sensitive lexicographic order as defined in the Java Documentation. Using a string value for a numeric property or a numeric value for a string property will cause an error.

`gis:find-greater-than`

gis:find-greater-than *VectorDataset* *property-name* *value*

Reports a list of all VectorFeatures in the given dataset whose value for the property property-name is greater than the given value. String values are compared using case-sensitive lexicographic order as defined in the Java Documentation. Using a string value for a numeric property or a numeric value for a string property will cause an error.

`gis:find-range`

gis:find-range *VectorDataset* *property-name* *minimum-value* *maximum-value*

Reports a list of all VectorFeatures in the given dataset whose value for the property property-name is strictly greater than minimum-value and strictly less than maximum-value. String values are compared using case-sensitive lexicographic order as defined in the Java Documentation. Using a string value for a numeric property or a numeric value for a string property will cause an error.

`gis:property-minimum`

gis:property-minimum *VectorDataset* *property-name*

Reports the smallest value for the given property over all of the VectorFeatures in the given dataset. String values are compared using case-sensitive lexicographic order as defined in the Java Documentation.

`gis:property-maximum`

gis:property-maximum *VectorDataset* *property-name*

Reports the largest value for the given property over all of the VectorFeatures in the given dataset. String values are compared using case-sensitive lexicographic order as defined in the Java Documentation.

`gis:apply-coverage`

gis:apply-coverage *VectorDataset* *property-name* *patch-variable*

Copies values from the given property of the VectorDataset's features to the given patch variable. The dataset must be a polygon dataset; points and lines are not supported.

For each patch, it finds all VectorFeatures that intersect that patch. Then, if the property is a string property, it computes the majority value by computing the total area of the patch covered by VectorFeatures having each possible value of the property, then returning the value which represents the largest proportion of the patch area. If the property is a numeric property, it computes a weighted average of property values from all VectorFeatures which intersect the patch, weighted by the proportion of the patch area they cover.

There are two exceptions to this default behavior:

If a percentage of a patches' area greater than the coverage-maximum-threshold is covered by a single VectorFeature, then the property value from that VectorFeature is copied directly. If more than one VectorFeature covers a percentage of area greater than the threshold, only the first will be used.
If the total percentage of a patches' area covered by VectorFeatures is less than the coverage-minimum-threshold, the target patch variable is set to Not A Number.

By default, the minimum threshold is 10% and the maximum threshold is 33%. These values may be modified using the four primitives that follow.

`gis:create-turtles-from-points`

gis:create-turtles-from-points *VectorDataset* *breed* *commands*

For each point in a VectorDataset of points, create a turtle of the specified breed at the point's location. For each agent variable (as defined in <breeds>-own), if there is a property with the same name in the dataset, set that variable's value to be the value of that property. Finally, execute any commands in the optional command block. To use generic turtles as the chosen breed, simply supply turtles as the breed argument.

Property names and variable names are compared case-insensitively. Keep in mind that when importing shapefiles, property names may be modified for backwards compatibility reasons. The names given by gis:property-names can always be trusted as authoritative. For manually specifying a mapping between property names and variable names, see the create-turtles-from-points-manual primitive.

For multi-point datasets, a turtle is created at each point of multi-point feature, each with the same set of variable values.

Built-in variables such as "label" and "heading" are supported. NetLogo color numeric representations are supported for setting "color" and "label-color", as well as the 15 default color string representations ("red", "blue", "black", etc.).

As an example: say you wanted to create a turtle of breed "cities/city" for each city in a dataset of cities like the one included in the "GIS General Examples" model from the models library. The cities dataset has four properties, "NAME", "COUNTRY", "POPULATION", and "CAPITAL". To map them all to NetLogo turtle variables and set their shapes to circles, you could do this:

extensions [gis]
breed [cities city]
cities-own [name country population capital]
globals [cities-dataset]

to setup
  set cities-dataset gis:load-dataset "cities.shp"
  gis:create-turtles-from-points cities-dataset cities [
    set shape "circle"
  ]
end

`gis:create-turtles-from-points-manual`

gis:create-turtles-from-points-manual *VectorDataset* *breed* *property-mapping* *commands*

Like create-turtles-from-points, creates a turtle for each point in a VectorDataset of points and populates their variables with the values of corresponding gis properties.

This primitive can be used to specify additional mappings between gis property names and NetLogo variable names. These mappings are specified as a list of lists of strings like so: [["property-name" "turtle-variable-name"] ["property-name" "turtle-variable-name"] (etc.)]

These manual mappings modify the automatic mapping process that takes place in the create-turtles-from-points primitive, so you only need to specify the changes you want to make to the default mappings, and the rest of the mappings will be untouched.

To return to the cities example from the create-turtles-from-points entry, the variable name "capital" is not very descriptive. something like "is-capital?" fits the NetLogo style much better. To make that change, you would modify the example like so.

extensions [gis]
breed [cities city]
cities-own [name country population is-capital?]
globals [cities-dataset]

to setup
  set cities-dataset gis:load-dataset "cities.shp"
  ;; Since we only want to change how the "CAPITAL" property is mapped, we only need to specify that one change.
  gis:create-turtles-from-points-manual cities-dataset cities [["CAPITAL" "is-capital?"]] [
    set shape "circle"
  ]
  ;; Each city turtle still has a name, country, and population set just like the non-manual version.
end

`gis:create-turtles-inside-polygon`

gis:create-turtles-inside-polygon *VectorFeature* *breed* *n* *commands*

Randomly create "n" turtles of the given breed within the given VectorFeature and for each agent variable (as defined in -own), if there is a property with the same name in the dataset, set that variable's value to be the value of that property. Finally, execute any commands in the optional command block. To use generic turtles as the chosen breed, simply supply turtles as the breed argument.

Property names and variable names are compared case-insensitively. Keep in mind that when importing shapefiles, property names may be modified for backwards compatibility reasons. The names given by gis:property-names can always be trusted as authoritative. For manually specifying a mapping between property names and variable names, see the create-turtles-inside-polygon-manual primitive.

Built-in variables such as "label" and "heading" are supported. NetLogo color numeric representations are supported for setting "color" and "label-color", as well as the 15 default color string representations ("red", "blue", "black", etc.).

As an example: say you had a VectorDataset of polygons representing different zip codes within a state and you want to create 100 different turtles within each zip code and have each turtle know which zip code it originated in. The VectorDataset has a field named "zip", so you should add a variable named "zip" to the turtles with turtles-own. Then, loop through each VectorFeature in the VectorDataset and use the create-turtles-inside-polygon primitive to create 100 new turtles.

extensions [gis]
globals [dataset]
turtles-own [zip]

to setup
  set dataset gis:load-dataset "dataset.shp"
  gis:set-world-envelope envelope-of dataset
  gis:set-drawing-color red
  gis:draw dataset 1

  foreach gis:feature-list-of dataset [ this-vector-feature ->
    gis:create-turtles-inside this-vector-feature turtles 100 [
      set shape "person"
    ]
  ]
end

`gis:create-turtles-inside-polygon-manual`

gis:create-turtles-inside-polygon-manual *VectorFeature* *breed* *n* *property-mapping* *commands*

Like create-turtles-inside-polygon, creates "n" different turtles within the given VectorFeature and populates their agent variables with values corresponding to the property values of the VectorFeature.

This primitive can be used to specify additional mappings between gis property names and NetLogo variable names. These mappings are specified as a list of lists of strings like so: [["property-name" "turtle-variable-name"] ["property-name" "turtle-variable-name"] (etc.)]

These manual mappings modify the automatic mapping process that takes place in the create-turtles-inside-polygon primitive, so you only need to specify the changes you want to make to the default mappings, and the rest of the mappings will be untouched.

See the create-turtles-from-points-manual entry for an example of how to override default mappings with manual ones.

`gis:coverage-minimum-threshold`

gis:coverage-minimum-threshold

Reports the current coverage minimum threshold used by gis:apply-coverage.

`gis:set-coverage-minimum-threshold`

gis:set-coverage-minimum-threshold *new-threshold*

Sets the current coverage minimum threshold to be used by gis:apply-coverage.

`gis:coverage-maximum-threshold`

gis:coverage-maximum-threshold

Reports the current coverage maximum threshold used by gis:apply-coverage.

`gis:set-coverage-maximum-threshold`

gis:set-coverage-maximum-threshold *new-threshold*

Sets the current coverage maximum threshold to be used by gis:apply-coverage.

`gis:intersects?`

gis:intersects? *x* *y*

Reports true if the given objects' spatial representations share at least one point in common, and false otherwise. The objects x and y may be any one of:

a VectorDataset, in which case the object's spatial representation is the union of all the points, lines, or polygons the dataset contains.
a VectorFeature, in which case the object's spatial representation is defined by the point, line, or polygon the feature contains.
A turtle, in which case the spatial representation is a point.
A link, whose spatial representation is a line segment connecting the two points represented by the turtles the link is connecting.
A patch, whose spatial representation is a rectangular polygon.
An agentset, whose spatial representation is the union of the representations of all of the agents it contains.
A list containing of any of the items listed here, including another list. The spatial representation of such a list is the union of the spatial representations of its contents.

`gis:contains?`

gis:contains? *x* *y*

Reports true if every point of y's spatial representation is also a part of x's spatial representation. Note that this means that polygons do contain their boundaries. The objects x and y may be any one of

a VectorDataset, in which case the object's spatial representation is the union of all the points, lines, or polygons the dataset contains.
a VectorFeature, in which case the object's spatial representation is defined by the point, line, or polygon the feature contains.
A turtle, in which case the spatial representation is a point.
A link, whose spatial representation is a line segment connecting the two points represented by the turtles the link is connecting.
A patch, whose spatial representation is a rectangular polygon.
An agentset, whose spatial representation is the union of the representations of all of the agents it contains.
A list containing of any of the items listed here, including another list. The spatial representation of such a list is the union of the spatial representations of its contents.

`gis:contained-by?`

gis:contained-by? *x* *y*

Reports true if every point of x's spatial representation is also a part of y's spatial representation. The objects x and y may be any one of:

a VectorDataset, in which case the object's spatial representation is the union of all the points, lines, or polygons the dataset contains.
a VectorFeature, in which case the object's spatial representation is defined by the point, line, or polygon the feature contains.
A turtle, in which case the spatial representation is a point.
A link, whose spatial representation is a line segment connecting the two points represented by the turtles the link is connecting.
A patch, whose spatial representation is a rectangular polygon.
An agentset, whose spatial representation is the union of the representations of all of the agents it contains.
A list containing of any of the items listed here, including another list. The spatial representation of such a list is the union of the spatial representations of its contents.

`gis:have-relationship?`

gis:have-relationship? *x* *y*

Reports true if the spatial representations of the two objects have the given spatial relationship, and false otherwise. The spatial relationship is specified using a Dimensionally Extended Nine- Intersection Model (DE-9IM) matrix. The matrix consists of 9 elements, each of which specifies the required relationship between the two objects' interior space, boundary space, or exterior space. The elements must have one of six possible values:

"T", meaning the spaces must intersect in some way
"F", meaning the spaces must not intersect in any way
"0", meaning the dimension of the spaces' intersection must be zero (i.e., it must be a point or non-empty set of points).
"1", meaning the dimension of the spaces' intersection must be one (i.e., it must be a line or non-empty set of line segments).
"2", meaning the dimension of the spaces' intersection must be two (i.e., it must be a polygon or set of polygons whose area is greater than zero).
"*", meaning that the two spaces may have any relationship.

For example, this matrix:

		x
		Interior	Boundary	Exterior
y	Interior	T	*	*
	Boundary	*	*	*
	Exterior	F	F	*

would return true if and only if some part of object x's interior lies inside object y's interior, and no part of object x's interior or boundary intersects object y's exterior. This is essentially a more restrictive form of the contains? primitive; one in which polygons are not considered to contain their boundaries.

The matrix is given to the have-relationship? primitive as a string, whose elements are given in the following order:

1	2	3
4	5	6
7	8	9

So to use the example matrix above, you would write:

gis:have-relationship? x y "T*****FF*"

A much more detailed and formal description of the DE-9IM matrix and the associated point-set theory can be found in the OpenGIS Simple Features Specification for SQL.

The objects x and y may be any one of:

a VectorDataset, in which case the object's spatial representation is the union of all the points, lines, or polygons the dataset contains.
a VectorFeature, in which case the object's spatial representation is defined by the point, line, or polygon the feature contains.
A turtle, in which case the spatial representation is a point.
A link, whose spatial representation is a line segment connecting the two points represented by the turtles the link is connecting.
A patch, whose spatial representation is a rectangular polygon.
An agentset, whose spatial representation is the union of the representations of all of the agents it contains.
A list containing of any of the items listed here, including another list. The spatial representation of such a list is the union of the spatial representations of its contents.

`gis:relationship-of`

gis:relationship-of *x* *y*

Reports the Dimensionally Extended Nine-Intersection Model (DE-9IM) matrix that describes the spatial relationship of the two objects. The matrix consists of 9 elements, each of which describes the relationship between the two objects' interior space, boundary space, or exterior space. Each element will describe the dimension of the intersection of two spaces, meaning that it may have one of four possible values:

"-1", meaning the spaces do not intersect
"0", meaning the dimension of the spaces' intersection is zero (i.e., they intersect at a point or set of points).
"1", meaning the dimension of the spaces' intersection is one (i.e., they intersect along one or more lines).
"2", meaning the dimension of the spaces' intersection is two (i.e., their intersection is a non-empty polygon).

For example, the two polygons x and y shown here:

have the following DE-9IM matrix:

		x
		Interior	Boundary	Exterior
y	Interior	2	1	2
	Boundary	1	0	1
	Exterior	2	1	2

Which would be reported by the relationship-of primitive as the string "212101212".

A much more detailed and formal description of the DE-9IM matrix and the associated point-set theory can be found in the OpenGIS Simple Features Specification for SQL.

The objects x and y may be any one of:

a VectorDataset, in which case the object's spatial representation is the union of all the points, lines, or polygons the dataset contains.
a VectorFeature, in which case the object's spatial representation is defined by the point, line, or polygon the feature contains.
A turtle, in which case the spatial representation is a point.
A link, whose spatial representation is a line segment connecting the two points represented by the turtles the link is connecting.
A patch, whose spatial representation is a rectangular polygon.
An agentset, whose spatial representation is the union of the representations of all of the agents it contains.
A list containing of any of the items listed here, including another list. The spatial representation of such a list is the union of the spatial representations of its contents.

`gis:intersecting`

gis:intersecting *patch-set* *data*

Reports a new agent set containing only those members of the given agent set which intersect given GIS data, which may be any one of: a VectorDataset, a VectorFeature, an Agent, an Agent Set, or a list containing any of the above.

`gis:width-of`

gis:width-of *RasterDataset*

Reports the number of columns in the dataset. Note that this is the number of cells from left to right, not the width of the dataset in GIS space.

`gis:height-of`

gis:height-of *RasterDataset*

Reports the number of rows in the dataset. Note that this is the number of cells from top to bottom, not the height of the dataset in GIS space.

`gis:raster-value`

gis:raster-value *RasterDataset* *x* *y*

Reports the value of the given raster dataset in the given cell. Cell coordinates are numbered from left to right, and from top to bottom, beginning with zero. So the upper left cell is (0, 0), and the bottom right cell is (gis:width-of dataset - 1, gis:height-of dataset - 1).

`gis:set-raster-value`

gis:set-raster-value *RasterDataset* *x* *y* *value*

Sets the value of the given raster dataset at the given cell to a new value. Cell coordinates are numbered from left to right, and from top to bottom, beginning with zero. So the upper left cell is (0, 0), and the bottom right cell is (gis:width-of dataset

1, gis:height-of dataset - 1).

`gis:minimum-of`

gis:minimum-of *RasterDataset*

Reports the highest value in the given raster dataset.

`gis:maximum-of`

gis:maximum-of *RasterDataset*

Reports the lowest value in the given raster dataset.

`gis:sampling-method-of`

gis:sampling-method-of *RasterDataset*

Reports the sampling method used to compute the value of the given raster dataset at a single point, or over an area smaller than a single raster cell. Sampling is performed by the GIS extension primitives raster-sample, resample, convolve, and apply-raster. The sampling method will be one of the following:

"NEAREST_NEIGHBOR": the value of the cell nearest the sampling location is used.
"BILINEAR": the value of the four nearest cells are sampled by linear weighting, according to their proximity to the sampling site.
"BICUBIC": the value of the sixteen nearest cells are sampled, and their values are combined by weight according to a piecewise cubic polynomial recommended by Rifman (see Digital Image Warping, George Wolberg, 1990, pp 129-131, IEEE Computer Society Press).
"BICUBIC_2": the value is sampled using the same procedure and the same polynomial as with BICUBIC above, but using a different coefficient. This method may produce somewhat sharper results than BICUBIC, but that result is data dependent.

For more information on these sampling methods and on raster sampling in general, see this wikipedia article.

`gis:set-sampling-method`

gis:set-sampling-method *RasterDataset* *sampling-method*

Sets the sampling method used by the given raster dataset at a single point, or over an area smaller than a single raster cell. Sampling is performed by the GIS extension primitives raster-sample, resample, convolve, and apply-raster. The sampling method must be one of the following:

"NEAREST_NEIGHBOR"
"BILINEAR"
"BICUBIC"
"BICUBIC_2"

See sampling-method-of above for a more specific description of each sampling method.

`gis:raster-sample`

gis:raster-sample *RasterDataset* *sample-location*

Reports the value of the given raster over the given location. The location may be any of the following:

A list of length 2, which is taken to represent a point in netlogo space ([xcor ycor]) of the sort reported by location-of Vertex. The raster dataset is sampled at the point of that location.
A list of length 4, which is taken to represent an envelope in GIS space, of the sort reported by envelope-of. The raster dataset is sampled over the area of that envelope.
A patch, in which case the raster dataset is sampled over the area of the patch.
A turtle, in which case the raster dataset is sampled at the location of that turtle.
A Vertex, in which case the raster dataset is sampled at the location of that Vertex.

If the requested location is outside the area covered by the raster dataset, this primitive reports the special value representing "not a number", which is printed by NetLogo as "NaN". Using the special "not a number" value as an argument to primitives that expect a number may cause an error, but you can test the value reported by this primitive to filter out "not a number" values. A value that is not a number will be neither less than nor greater than a number value, so you can detect "not a number" values using the following:

let value gis:raster-sample dataset turtle 0
; set color to blue if value is a number, red if value is "not a number"
ifelse (value <= 0) or (value >= 0)
[ set color blue ]
[ set color red ]

If the requested location is a point, the sample is always computed using the method set by set-sampling-method. If the requested location is an area (i.e., an envelope or patch), the sample is computed by taking the average of all raster cells covered by the requested area.

`gis:raster-world-envelope`

gis:raster-world-envelope *RasterDataset* *x* *y*

Reports the GIS envelope needed to match the boundaries of NetLogo patches with the boundaries of cells in the given raster dataset. This envelope could then be used as an argument to set-transformation-ds.

There may be more cells in the dataset than there are patches in the NetLogo world. In that case, you will need to select a subset of cells in the dataset by specifying which cell in the dataset you want to match with the upper-left corner of the NetLogo world. Cells are numbered from left to right, and from top to bottom, beginning with zero. So the upper left cell is (0, 0), and the bottom right cell is (gis:width-of dataset - 1, gis:height-of dataset - 1).

`gis:create-raster`

gis:create-raster *width* *height* *envelope*

Creates and reports a new, empty raster dataset with the given number of columns and rows, covering the given envelope.

`gis:resample`

gis:resample *RasterDataset* *envelope* *width* *height*

Reports a new dataset that consists of the given RasterDataset resampled to cover the given envelope and to contain the given number of columns and rows. If the new raster's cells are smaller than the existing raster's cells, they will be resampled using the method set by set-sampling-method. If the new cells are larger than the original cells, they will be sampled using the "NEAREST_NEIGHBOR" method.

`gis:convolve`

gis:convolve *RasterDataset* *kernel-rows* *kernel-columns* *kernel* *key-column* *key-row*

Reports a new raster whose data consists of the given raster convolved with the given kernel.

A convolution is a mathematical operation that computes each output cell by multiplying elements of a kernel with the cell values surrounding a particular source cell. A kernel is a matrix of values, with one particular value defined as the "key element", the value that is centered over the source cell corresponding to the destination cell whose value is being computed.

The values of the kernel matrix are given as a list, which enumerates the elements of the matrix from left to right, top to bottom. So the elements of a 3-by-3 matrix would be listed in the following order:

1	2	3
4	5	6
7	8	9

The key element is specified by column and row within the matrix. Columns are numbered from left to right, beginning with zero. Rows are numbered from top to bottom, also beginning with zero. So, for example, the kernel for the horizontal Sobel operator, which looks like this:

1	0	-1
2	0 (key)	-2
1	0	-1

would be specified as follows:

let horizontal-gradient gis:convolve dataset 3 3 [1 0 -1 2 0 -2 1 0 -1] 1 1

`gis:apply-raster`

gis:apply-raster *RasterDataset* *patch-variable*

Copies values from the given raster dataset to the given patch variable, resampling the raster as necessary so that its cell boundaries match up with NetLogo patch boundaries. This resampling is done as if using resample rather than raster-sample, for the sake of efficiency. However, patches not covered by the raster are assigned values of "not a number" in the same way that raster-sample reports values for locations outside the raster.

`gis:drawing-color`

gis:drawing-color

Reports the color used by the GIS extension to draw vector features into the NetLogo drawing layer. Color can be represented either as a NetLogo color (a single number between zero and 140) or an RGB color (a list of 3 numbers). See details in the Colors section of the Programming Guide.

`gis:set-drawing-color`

gis:set-drawing-color *color*

Sets the color used by the GIS extension to draw vector features into the NetLogo drawing layer. Color can be represented either as a NetLogo color (a single number between zero and 140) or an RGB color (a list of 3 numbers). See details in the Colors section of the Programming Guide.

`gis:draw`

gis:draw *vector-data* *line-thickness*

Draws the given vector data to the NetLogo drawing layer, using the current GIS drawing color, with the given line thickness. The data may consist either of an entire VectorDataset, or a single VectorFeature. This primitive draws only the boundary of polygon data, and for point data, it fills a circle with a radius equal to the line thickness.

`gis:fill`

gis:fill *vector-data* *line-thickness*

Fills the given vector data in the NetLogo drawing layer using the current GIS drawing color, using the given line thickness around the edges. The data may consist either of an entire VectorDataset, or a single VectorFeature. For point data, it fills a circle with a radius equal to the line thickness.

`gis:paint`

gis:paint *RasterDataset* *transparency*

Paints the given raster data to the NetLogo drawing layer. The highest value in the dataset is painted white, the lowest is painted in black, and the other values are painted in shades of gray scaled linearly between white and black.

The transparency input determines how transparent the new image in the drawing will be. Valid inputs range from 0 (completely opaque) to 255 (completely transparent).

`gis:import-wms-drawing`

gis:import-wms-drawing *server-url* *spatial-reference* *layers* *transparency*

Imports an image into the NetLogo drawing layer using the Web Mapping Service protocol, as defined by the Open Geospatial Consortium.

The spatial reference and layers inputs should be given as strings. The spatial reference input corresponds to the SRS parameter to the GetMap request as defined in section 7.2.3.5 of version 1.1.1 of the WMS standard. The layers input corresponds to the LAYERS parameter to the as defined in 7.2.3.3 of version 1.1.1 of the WMS standard.

You can find the list of valid spatial reference codes and layer names by examining the response to a GetCapabilities request to the WMS server. Consult the relevant standard for instructions on how to issue a GetCapabilities request to the server and how to interpret the results.

The transparency input determines how transparent the new image in the drawing will be. Valid inputs range from 0 (completely opaque) to 255 (completely transparent).

Terms of Use

The Java source code (files in the src directory whose names end in ".java") and binary object code (the file "gis.jar") of the GIS Extension are made available to you subject to the terms of the following license:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--------------------------------------------------------------------------------

The following data files included with the GIS Extension contain proprietary
and confidential property of Environmental Systems Research Institute, Inc.
(ESRI), Redlands, CA, and its licensor(s). These files are:

cities.dbf, cities.shp, cities.shx, cities.txt,
countries.dbf, countries.shp, countries.shx, countries.xml
rivers.dbf, rivers.shp, rivers.shp, rivers.txt

These files are made available under the following license:

Proprietary Rights and Copyright: Licensee acknowledges that the Data and
Related Materials contain proprietary and confidential property of ESRI and
its licensor(s). The Data and Related Materials are owned by ESRI and its
licensor(s) and are protected by United States copyright laws and applicable
international copyright treaties and/or conventions.

THE LICENSEE EXPRESSLY ACKNOWLEDGES THAT THE DATA CONTAIN
SOME NONCONFORMITIES, DEFECTS, OR ERRORS. ESRI DOES NOT
WARRANT THAT THE DATA WILL MEET LICENSEE'S NEEDS OR
EXPECTATIONS, THAT THE USE OF THE DATA WILL BE UNINTERRUPTED,
OR THAT ALL NONCONFORMITIES, DEFECTS, OR ERRORS CAN OR WILL
BE CORRECTED. ESRI IS NOT INVITING RELIANCE ON THESE DATA, AND
THE LICENSEE SHOULD ALWAYS VERIFY ACTUAL DATA.

THE DATA AND RELATED MATERIALS CONTAINED THEREIN ARE PROVIDED
"AS-IS," WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ESRI AND/OR ITS LICENSOR(S) BE LIABLE FOR COSTS
OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, LOST PROFITS,
LOST SALES OR BUSINESS EXPENDITURES, INVESTMENTS, OR
COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY
GOODWILL, OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT OR USE OF
THE DATA AND RELATED MATERIALS, HOWEVER CAUSED, ON ANY THEORY
OF LIABILITY, AND WHETHER OR NOT ESRI AND/OR ITS LICENSOR(S) HAVE
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THESE LIMITATIONS
SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE
OF ANY EXCLUSIVE REMEDY.

Third Party Beneficiary: ESRI's licensor(s) has (have) authorized ESRI to
(sub)distribute and (sub)license their data as incorporated into the Data and
Related Materials. As an intended third party beneficiary to this Agreement,
the ESRI licensor(s) is (are) entitled to directly enforce, in its own name,
the rights and obligations undertaken by the Licensee and to seek all legal
and equitable remedies as are afforded to ESRI.

ESRI is a trademark of Environmental Systems Research Institute, Inc.

--------------------------------------------------------------------------------

The Java Advanced Imaging libraries (the binary files jai_codec-1.1.3.jar and
jai_core-1.1.3.jar) are copyright (c) 2006 Sun Microsystems, and are made
available under the following license:

Sun Microsystems, Inc.
Binary Code License Agreement

JAVA ADVANCED IMAGING API, VERSION 1.1.3

READ THE TERMS OF THIS AGREEMENT AND ANY PROVIDED SUPPLEMENTAL LICENSE TERMS
(COLLECTIVELY "AGREEMENT") CAREFULLY BEFORE OPENING THE SOFTWARE MEDIA
PACKAGE. BY OPENING THE SOFTWARE MEDIA PACKAGE, YOU AGREE TO THE TERMS OF
THIS AGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE
YOUR ACCEPTANCE OF THESE TERMS BY SELECTING THE "ACCEPT" BUTTON AT THE END OF
THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL THESE TERMS, PROMPTLY RETURN THE
UNUSED SOFTWARE TO YOUR PLACE OF PURCHASE FOR A REFUND OR, IF THE SOFTWARE IS
ACCESSED ELECTRONICALLY, SELECT THE "DECLINE" BUTTON AT THE END OF THIS
AGREEMENT.

1. LICENSE TO USE. Sun grants you a non-exclusive and non-transferable
license for the internal use only of the accompanying software and
documentation and any error corrections provided by Sun (collectively
"Software"), by the number of users and the class of computer hardware for
which the corresponding fee has been paid.

2. RESTRICTIONS. Software is confidential and copyrighted. Title to
Software and all associated intellectual property rights is retained by Sun
and/or its licensors. Except as specifically authorized in any Supplemental
License Terms, you may not make copies of Software, other than a single copy
of Software for archival purposes. Unless enforcement is prohibited by
applicable law, you may not modify, decompile, or reverse engineer Software.
Licensee acknowledges that Software is not designed or intended for use in
the design, construction, operation or maintenance of any nuclear facility.
Sun Microsystems, Inc. disclaims any express or implied warranty of fitness
for such uses. No right, title or interest in or to any trademark, service
mark, logo or trade name of Sun or its licensors is granted under this
Agreement.

3. LIMITED WARRANTY. Sun warrants to you that for a period of ninety (90)
days from the date of purchase, as evidenced by a copy of the receipt, the
media on which Software is furnished (if any) will be free of defects in
materials and workmanship under normal use. Except for the foregoing,
Software is provided "AS IS". Your exclusive remedy and Sun's entire
liability under this limited warranty will be at Sun's option to replace
Software media or refund the fee paid for Software.

4. DISCLAIMER OF WARRANTY. UNLESS SPECIFIED IN THIS AGREEMENT, ALL EXPRESS
OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT THESE DISCLAIMERS
ARE HELD TO BE LEGALLY INVALID.

5. LIMITATION OF LIABILITY. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO
EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR
DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF
OR RELATED TO THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event will Sun's liability
to you, whether in contract, tort (including negligence), or otherwise,
exceed the amount paid by you for Software under this Agreement. The
foregoing limitations will apply even if the above stated warranty fails of
its essential purpose.

6. Termination. This Agreement is effective until terminated. You may
terminate this Agreement at any time by destroying all copies of Software.
This Agreement will terminate immediately without notice from Sun if you fail
to comply with any provision of this Agreement. Upon Termination, you must
destroy all copies of Software.

7. Export Regulations. All Software and technical data delivered under this
Agreement are subject to US export control laws and may be subject to export
or import regulations in other countries. You agree to comply strictly with
all such laws and regulations and acknowledge that you have the
responsibility to obtain such licenses to export, re-export, or import as may
be required after delivery to you.

8. U.S. Government Restricted Rights. If Software is being acquired by or
on behalf of the U.S. Government or by a U.S. Government prime contractor or
subcontractor (at any tier), then the Government's rights in Software and
accompanying documentation will be only as set forth in this Agreement; this
is in accordance with 48 CFR 227.7201 through 227.7202-4 (for Department of
Defense (DOD) acquisitions) and with 48 CFR 2.101 and 12.212 (for non-DOD
acquisitions).

9. Governing Law. Any action related to this Agreement will be governed by
California law and controlling U.S. federal law. No choice of law rules of
any jurisdiction will apply.

10. Severability. If any provision of this Agreement is held to be
unenforceable, this Agreement will remain in effect with the provision
omitted, unless omission would frustrate the intent of the parties, in which
case this Agreement will immediately terminate.

11. Integration. This Agreement is the entire agreement between you and Sun
relating to its subject matter. It supersedes all prior or contemporaneous
oral or written communications, proposals, representations and warranties and
prevails over any conflicting or additional terms of any quote, order,
acknowledgment, or other communication between the parties relating to its
subject matter during the term of this Agreement. No modification of this
Agreement will be binding, unless in writing and signed by an authorized
representative of each party.

JAVA ADVANCED IMAGING, VERSION 1.1.3
SUPPLEMENTAL LICENSE TERMS

These supplemental license terms ("Supplemental Terms") add to or modify the
terms of the Binary Code License Agreement (collectively, the "Agreement").
Capitalized terms not defined in these Supplemental Terms shall have the same
meanings ascribed to them in the Agreement. These Supplemental Terms shall
supersede any inconsistent or conflicting terms in the Agreement, or in any
license contained within the Software.

1. Software Internal Use and Development License Grant. Subject to the terms
and conditions of this Agreement, including, but not limited to Section 3
(Java Technology Restrictions) of these Supplemental Terms, Sun grants you a
non-exclusive, non-transferable, limited license to reproduce internally and
use internally the binary form of the Software, complete and unmodified, for
the sole purpose of designing, developing and testing your Java applets and
applications ("Programs").

2. License to Distribute Software. In addition to the license granted in
Section 1 (Software Internal Use and Development License Grant) of these
Supplemental Terms, subject to the terms and conditions of this Agreement,
including but not limited to, Section 3 (Java Technology Restrictions) of
these Supplemental Terms, Sun grants you a non-exclusive, non-transferable,
limited license to reproduce and distribute the Software in binary code form
only, provided that you (i) distribute the Software complete and unmodified
and only bundled as part of your Programs, (ii) do not distribute additional
software intended to replace any component(s) of the Software, (iii) do not
remove or alter any proprietary legends or notices contained in the Software,
(iv) only distribute the Software subject to a license agreement that
protects Sun's interests consistent with the terms contained in this
Agreement, and (v) agree to defend and indemnify Sun and its licensors from
and against any damages, costs, liabilities, settlement amounts and/or
expenses (including attorneys' fees) incurred in connection with any claim,
lawsuit or action by any third party that arises or results from the use or
distribution of any and all Programs and/or Software.

3. Java Technology Restrictions. You may not modify the Java Platform
Interface ("JPI", identified as classes contained within the "java" package
or any subpackages of the "java" package), by creating additional classes
within the JPI or otherwise causing the addition to or modification of the
classes in the JPI. In the event that you create an additional class and
associated API(s) which (i) extends the functionality of the Java platform,
and (ii) is exposed to third party software developers for the purpose of
developing additional software which invokes such additional API, you must
promptly publish broadly an accurate specification for such API for free use
by all developers. You may not create, or authorize your licensees to create
additional classes, interfaces, or subpackages that are in any way identified
as "java", "javax", "sun" or similar convention as specified by Sun in any
naming convention designation.

4. Java Runtime Availability. Refer to the appropriate version of the Java
Runtime Environment binary code license (currently located at
http://www.java.sun.com/jdk/index.html) for the availability of runtime code
which may be distributed with Java applets and applications.

5. Trademarks and Logos. You acknowledge and agree as between you and Sun
that Sun owns the SUN, SOLARIS, JAVA, JINI, FORTE, and iPLANET trademarks and
all SUN, SOLARIS, JAVA, JINI, FORTE, and iPLANET-related trademarks, service
marks, logos and other brand designations ("Sun Marks"), and you agree to
comply with the Sun Trademark and Logo Usage Requirements currently located
at http://www.sun.com/policies/trademarks. Any use you make of the Sun Marks
inures to Sun's benefit.

6. Source Code. Software may contain source code that is provided solely for
reference purposes pursuant to the terms of this Agreement. Source code may
not be redistributed unless expressly provided for in this Agreement.

7. Termination for Infringement. Either party may terminate this Agreement
immediately should any Software become, or in either party's opinion be
likely to become, the subject of a claim of infringement of any intellectual
property right.

8. Third Party Code. Additional copyright notices and license terms
applicable to portions of the Software are set forth in the
THIRDPARTYLICENSEREADME. In addition to any terms and conditions of any third
party open source/freeware license identified in the THIRDPARTYLICENSEREADME,
the disclaimer of warranty and limitation of liability provisions in
paragraphs 5 and 6 of the Binary Code License Agreement shall apply to all
Software in this distribution.

For inquiries please contact: Sun Microsystems, Inc., 4150 Network Circle,
Santa Clara, California 95054, U.S.A

The source code of the Java Advanced Imaging library is available at:

https://jai.dev.java.net/

--------------------------------------------------------------------------------

The JTS library (the binary file "jts-1.9.jar") is copyright (c) Vivid
Solutions, and is made available under the following license:

GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007

Copyright (C) 2007 Free Software Foundation, Inc.
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.

This version of the GNU Lesser General Public License incorporates
the terms and conditions of version 3 of the GNU General Public
License, supplemented by the additional permissions listed below.

0. Additional Definitions.

As used herein, "this License" refers to version 3 of the GNU Lesser
General Public License, and the "GNU GPL" refers to version 3 of the GNU
General Public License.

"The Library" refers to a covered work governed by this License,
other than an Application or a Combined Work as defined below.

An "Application" is any work that makes use of an interface provided
by the Library, but which is not otherwise based on the Library.
Defining a subclass of a class defined by the Library is deemed a mode
of using an interface provided by the Library.

A "Combined Work" is a work produced by combining or linking an
Application with the Library. The particular version of the Library
with which the Combined Work was made is also called the "Linked
Version".

The "Minimal Corresponding Source" for a Combined Work means the
Corresponding Source for the Combined Work, excluding any source code
for portions of the Combined Work that, considered in isolation, are
based on the Application, and not on the Linked Version.

The "Corresponding Application Code" for a Combined Work means the
object code and/or source code for the Application, including any data
and utility programs needed for reproducing the Combined Work from the
Application, but excluding the System Libraries of the Combined Work.

1. Exception to Section 3 of the GNU GPL.

You may convey a covered work under sections 3 and 4 of this License
without being bound by section 3 of the GNU GPL.

2. Conveying Modified Versions.

If you modify a copy of the Library, and, in your modifications, a
facility refers to a function or data to be supplied by an Application
that uses the facility (other than as an argument passed when the
facility is invoked), then you may convey a copy of the modified
version:

a) under this License, provided that you make a good faith effort to
ensure that, in the event an Application does not supply the
function or data, the facility still operates, and performs
whatever part of its purpose remains meaningful, or

b) under the GNU GPL, with none of the additional permissions of
this License applicable to that copy.

3. Object Code Incorporating Material from Library Header Files.

The object code form of an Application may incorporate material from
a header file that is part of the Library. You may convey such object
code under terms of your choice, provided that, if the incorporated
material is not limited to numerical parameters, data structure
layouts and accessors, or small macros, inline functions and templates
(ten or fewer lines in length), you do both of the following:

a) Give prominent notice with each copy of the object code that the
Library is used in it and that the Library and its use are
covered by this License.

b) Accompany the object code with a copy of the GNU GPL and this license
document.

4. Combined Works.

You may convey a Combined Work under terms of your choice that,
taken together, effectively do not restrict modification of the
portions of the Library contained in the Combined Work and reverse
engineering for debugging such modifications, if you also do each of
the following:

a) Give prominent notice with each copy of the Combined Work that
the Library is used in it and that the Library and its use are
covered by this License.

b) Accompany the Combined Work with a copy of the GNU GPL and this license
document.

c) For a Combined Work that displays copyright notices during
execution, include the copyright notice for the Library among
these notices, as well as a reference directing the user to the
copies of the GNU GPL and this license document.

d) Do one of the following:

0) Convey the Minimal Corresponding Source under the terms of this
License, and the Corresponding Application Code in a form
suitable for, and under terms that permit, the user to
recombine or relink the Application with a modified version of
the Linked Version to produce a modified Combined Work, in the
manner specified by section 6 of the GNU GPL for conveying
Corresponding Source.

1) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (a) uses at run time
a copy of the Library already present on the user's computer
system, and (b) will operate properly with a modified version
of the Library that is interface-compatible with the Linked
Version.

e) Provide Installation Information, but only if you would otherwise
be required to provide such information under section 6 of the
GNU GPL, and only to the extent that such information is
necessary to install and execute a modified version of the
Combined Work produced by recombining or relinking the
Application with a modified version of the Linked Version. (If
you use option 4d0, the Installation Information must accompany
the Minimal Corresponding Source and Corresponding Application
Code. If you use option 4d1, you must provide the Installation
Information in the manner specified by section 6 of the GNU GPL
for conveying Corresponding Source.)

5. Combined Libraries.

You may place library facilities that are a work based on the
Library side by side in a single library together with other library
facilities that are not Applications and are not covered by this
License, and convey such a combined library under terms of your
choice, if you do both of the following:

a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities,
conveyed under the terms of this License.

b) Give prominent notice with the combined library that part of it
is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.

6. Revised Versions of the GNU Lesser General Public License.

The Free Software Foundation may publish revised and/or new versions
of the GNU Lesser General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the
Library as you received it specifies that a certain numbered version
of the GNU Lesser General Public License "or any later version"
applies to it, you have the option of following the terms and
conditions either of that published version or of any later version
published by the Free Software Foundation. If the Library as you
received it does not specify a version number of the GNU Lesser
General Public License, you may choose any version of the GNU Lesser
General Public License ever published by the Free Software Foundation.

If the Library as you received it specifies that a proxy can decide
whether future versions of the GNU Lesser General Public License shall
apply, that proxy's public statement of acceptance of any version is
permanent authorization for you to choose that version for the
Library.

The source code of the JTS library is available at:

http://sourceforge.net/projects/jts-topo-suite/

--------------------------------------------------------------------------------

The NGUnits library (the binary file ngunits-1.0.jar) is copyright (C) 2010-2012
National Geographic Society and is made available under the following license:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the National Geographic Society nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The source code of the NGUnits library is available at:

https://github.com/erussell/ngunits

--------------------------------------------------------------------------------

The Apache Commons codec, httpclient, and logging libraries (the binary
files commons-codec-1.3.jar, commons-httpclient-3.0.1.jar, and
commons-logging-1.1.jar) are copyrighted by The Apache Software Foundation,
and are made available under the following license:

Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.

"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:

(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.

You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

The source code of the Commons libraries are available at:

http://commons.apache.org/codec/,
http://hc.apache.org/httpclient-3.x/, and
http://commons.apache.org/logging/

Name		Name	Last commit message	Last commit date
Latest commit History 137 Commits
.github/workflows		.github/workflows
examples		examples
images		images
project		project
src		src
.gitignore		.gitignore
BUILDING.md		BUILDING.md
CHANGELOG.md		CHANGELOG.md
LICENSE.md		LICENSE.md
README.md		README.md
USING.md		USING.md
build.sbt		build.sbt
documentation.conf		documentation.conf
tests.txt		tests.txt

License

NetLogo/GIS-Extension

Folders and files

Latest commit

History

Repository files navigation

GIS Extension for NetLogo

Building

Using

How to use

Known Issues

Credits

Primitives

RasterDataset Primitives

Dataset Primitives

VectorDataset Primitives

Coordinate System Primitives

Drawing Primitives

gis:set-transformation

gis:set-transformation-ds

gis:set-world-envelope

gis:set-world-envelope-ds

gis:world-envelope

gis:envelope-of

gis:envelope-union-of

gis:load-coordinate-system

gis:set-coordinate-system

gis:project-lat-lon

gis:project-lat-lon-from-ellipsoid

gis:load-dataset

gis:store-dataset

gis:type-of

gis:patch-dataset

gis:turtle-dataset

gis:link-dataset

gis:shape-type-of

gis:property-names

gis:feature-list-of

gis:vertex-lists-of

gis:centroid-of

gis:random-point-inside

gis:location-of

gis:set-property-value

gis:property-value

gis:find-features

gis:find-one-feature

gis:find-less-than

gis:find-greater-than

gis:find-range

gis:property-minimum

gis:property-maximum

gis:apply-coverage

gis:create-turtles-from-points

gis:create-turtles-from-points-manual

gis:create-turtles-inside-polygon

gis:create-turtles-inside-polygon-manual

gis:coverage-minimum-threshold

gis:set-coverage-minimum-threshold

gis:coverage-maximum-threshold

gis:set-coverage-maximum-threshold

gis:intersects?

gis:contains?

gis:contained-by?

gis:have-relationship?

gis:relationship-of

gis:intersecting

gis:width-of

gis:height-of

gis:raster-value

gis:set-raster-value

gis:minimum-of

gis:maximum-of

gis:sampling-method-of

gis:set-sampling-method

gis:raster-sample

gis:raster-world-envelope

gis:create-raster

gis:resample

gis:convolve

gis:apply-raster

`gis:set-transformation`

`gis:set-transformation-ds`

`gis:set-world-envelope`

`gis:set-world-envelope-ds`

`gis:world-envelope`

`gis:envelope-of`

`gis:envelope-union-of`

`gis:load-coordinate-system`

`gis:set-coordinate-system`

`gis:project-lat-lon`

`gis:project-lat-lon-from-ellipsoid`

`gis:load-dataset`

`gis:store-dataset`

`gis:type-of`

`gis:patch-dataset`

`gis:turtle-dataset`

`gis:link-dataset`

`gis:shape-type-of`

`gis:property-names`

`gis:feature-list-of`

`gis:vertex-lists-of`

`gis:centroid-of`

`gis:random-point-inside`

`gis:location-of`

`gis:set-property-value`

`gis:property-value`

`gis:find-features`

`gis:find-one-feature`

`gis:find-less-than`

`gis:find-greater-than`

`gis:find-range`

`gis:property-minimum`

`gis:property-maximum`

`gis:apply-coverage`

`gis:create-turtles-from-points`

`gis:create-turtles-from-points-manual`

`gis:create-turtles-inside-polygon`

`gis:create-turtles-inside-polygon-manual`

`gis:coverage-minimum-threshold`

`gis:set-coverage-minimum-threshold`

`gis:coverage-maximum-threshold`

`gis:set-coverage-maximum-threshold`

`gis:intersects?`

`gis:contains?`

`gis:contained-by?`

`gis:have-relationship?`

`gis:relationship-of`

`gis:intersecting`

`gis:width-of`

`gis:height-of`

`gis:raster-value`

`gis:set-raster-value`

`gis:minimum-of`

`gis:maximum-of`

`gis:sampling-method-of`

`gis:set-sampling-method`

`gis:raster-sample`

`gis:raster-world-envelope`

`gis:create-raster`

`gis:resample`

`gis:convolve`

`gis:apply-raster`

`gis:drawing-color`

`gis:set-drawing-color`

`gis:draw`

`gis:fill`

`gis:paint`

`gis:import-wms-drawing`

Packages