git
gcc
g++
cmake
make
pkg-config
libbluetooth-dev
libreadline-dev
libgtk2.0-dev
libperl-dev
curl
unzip
gattlib
cmocka-1.1.0
iot-embeddedc
1. Install dependency libraries. In Debian Linux you can do this by commands:
sudo apt update
sudo apt install git gcc g++ cmake make pkg-config libbluetooth-dev libreadline-dev libgtk2.0-dev libperl-dev curl unzip
2. Get and compile gattlib libraries. You can do this by following commands:
git clone https://github.com/labapart/gattlib.git
cd gattlib
mkdir build
cd build
cmake -DGATTLIB_FORCE_DBUS=TRUE ..
make
cd ../..
3. Get and compile cmocka libraries. You can do this by following commands:
curl -O https://git.cryptomilk.org/projects/cmocka.git/snapshot/cmocka-1.1.0.zip
unzip cmocka-1.1.0.zip
rm -f cmocka-1.1.0.zip
cd cmocka-1.1.0
mkdir build
cd build
cmake ..
make
sudo make install
cd ../..
4. Get and compile ibm-watson-iot libraries. You can do this by following commands:
git clone https://github.com/ibm-watson-iot/iot-embeddedc.git
cd iot-embeddedc
./setup.sh
mkdir build
cd build
cmake ..
make
cd ../..
5. Build all in one executable. You can do this by following commands:
chmod +x make.sh
./make.sh
chmod +x run.sh
Execute next command to run the example:
sudo ./run.sh
After example start will be displayed devices list with their MAC addresses and names:
Device Client Connected to quickstart.messaging.internetofthings.ibmcloud.com Platform in QuickStart Mode
Connection Successful. Press Ctrl+C to quit
Discovered D0:CF:5E:0A:23:D8 - 'BleButton_23D8'
Discovered 02:80:E1:00:00:AA - 'AM1V300'
Discovered 51:84:DB:28:95:62
In next prompt:
Scan completed. Now please type your BLE MAC-adress:
you should insert one of the device addresses, belong to SensiBLE device, for example 02:80:E1:00:00:AA and press Enter. After this open browser and go to next URL to see the SensiBle data.
https://quickstart.internetofthings.ibmcloud.com/#/device/HB_SE_1/sensor/
