A(nother) power distribution board, mainly intended to learn about the PCB design an manufacturing process.
Here is the BOM with mouser references.
- Using 1,4mm traces, enough to process 3A on 1oz PCB
- Additional capacitors on board per power line to counter ripple and noise
- Onboard jumper to normalize 0V to earth ground
- Dashed silkscreen lines to safely cut the PCB if less than 3 rows/connectors are actually needed for the application
- Open Source Hardware
This open hardware project needs an external +12V, 0V, -12V power supply.
Please find the Wiring schematic for further details.
Watch the related video on Youtube for an in depth tutorial.
