Request to add a Zigbee button for SLED switch

drivers/SmartThings/zigbee-button/fingerprints.yml

@@ -164,6 +164,11 @@ zigbeeManufacturer:
     manufacturer: Third Reality, Inc
     model: 3RSB22BZ
     deviceProfileName: one-button-battery
+  - id: Samsung/SAMSUNG-ITM-Z-005
+    deviceLabel: ITM Switch
+    manufacturer: Samsung Electronics
+    model: SAMSUNG-ITM-Z-005
+    deviceProfileName: SLED-three-buttons  
   # # Wall Hero
   - id: "WALL HERO/ACL-401SCA4"
     deviceLabel: 语音场景(4寸）面板

drivers/SmartThings/zigbee-button/profiles/SLED-three-buttons.yml

@@ -0,0 +1,28 @@
+name: SLED-three-buttons
+components:
+  - id: main
+    capabilities:
+      - id: firmwareUpdate
+        version: 1
+      - id: refresh
+        version: 1
+    categories:
+      - name: RemoteController
+  - id: button1
+    capabilities:
+      - id: button
+        version: 1
+    categories:
+      - name: RemoteController
+  - id: button2
+    capabilities:
+      - id: button
+        version: 1
+    categories:
+      - name: RemoteController
+  - id: button3
+    capabilities:
+      - id: button
+        version: 1
+    categories:
+      - name: RemoteController

drivers/SmartThings/zigbee-button/src/zigbee-multi-button/SLED/init.lua

@@ -0,0 +1,80 @@
+-- Copyright 2023 SmartThings
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+local capabilities = require "st.capabilities"
+local clusters  = require "st.zigbee.zcl.clusters"
+local device_management = require "st.zigbee.device_management"
+local log = require "log"
+local Level = clusters.Level
+local OnOff = clusters.OnOff
+local ColorControl = clusters.ColorControl
+
+local emit_pushed_event = function(button_name, device)
+  local additional_fields = {
+    state_change = true
+  }
+  local event = capabilities.button.button.pushed(additional_fields)
+  local comp = device.profile.components[button_name]
+  if comp ~= nil then
+    device:emit_component_event(comp, event)
+  else
+    log.warn("Attempted to emit button event for unknown button: " .. button_name)
+  end
+end
+
+local emit_held_event = function(button_name, device)
+  local additional_fields = {
+    state_change = true
+  }
+  local event = capabilities.button.button.held(additional_fields)
+  local comp = device.profile.components[button_name]
+  if comp ~= nil then
+    device:emit_component_event(comp, event)
+  else
+    log.warn("Attempted to emit button event for unknown button: " .. button_name)
+  end
+end
+
+local do_configure = function(self, device)
+  device:send(device_management.build_bind_request(device, OnOff.ID, self.environment_info.hub_zigbee_eui))
+  -- The device reports button presses to this group but it can't be read from the binding table
+end
+
+local SLED_button = {
+  NAME = "SLED Button",
+  zigbee_handlers = {
+    cluster = {
+      [OnOff.ID] = {
+        [OnOff.server.commands.Off.ID] = function(driver, device, zb_rx) emit_pushed_event("button2", device) end,
+        [OnOff.server.commands.On.ID] = function(driver, device, zb_rx) emit_pushed_event("button1", device) end,
+        [OnOff.server.commands.Toggle.ID] = function(driver, device, zb_rx) emit_pushed_event("button3", device) end
+      },
+      [Level.ID] = {
+        [Level.server.commands.Move.ID] = function(driver, device, zb_rx) emit_held_event("button2", device) end,
+        [Level.server.commands.MoveWithOnOff.ID] = function(driver, device, zb_rx) emit_held_event("button1", device) end
+      },
+      [ColorControl.ID] = {
+        [ColorControl.server.commands.MoveToColorTemperature.ID] = function(driver, device, zb_rx) emit_held_event("button3", device) end
+      }
+    }
+  },
+  lifecycle_handlers = {
+    doConfigure = do_configure
+  },
+  can_handle = function(opts, driver, device, ...)
+    return device:get_manufacturer() == "Samsung Electronics" and device:get_model() == "SAMSUNG-ITM-Z-005"
+  end
+}
+
+return SLED_button

drivers/SmartThings/zigbee-button/src/zigbee-multi-button/init.lua

@@ -39,7 +39,8 @@ local ZIGBEE_MULTI_BUTTON_FINGERPRINTS = {
   { mfr = "ShinaSystem", model = "SBM300ZB3" },
   { mfr = "ROBB smarrt", model = "ROB_200-007-0" },
   { mfr = "ROBB smarrt", model = "ROB_200-008-0" },
-  { mfr = "WALL HERO", model = "ACL-401SCA4" }
+  { mfr = "WALL HERO", model = "ACL-401SCA4" },
+  { mfr = "Samsung Electronics", model = "SAMSUNG-ITM-Z-005" }
 }
 
 local function can_handle_zigbee_multi_button(opts, driver, device, ...)
@@ -86,6 +87,7 @@ local zigbee_multi_button = {
     require("zigbee-multi-button.shinasystems"),
     require("zigbee-multi-button.robb"),
     require("zigbee-multi-button.wallhero"),
+    require("zigbee-multi-button.SLED")
   }
 }
 

drivers/SmartThings/zigbee-button/src/zigbee-multi-button/supported_values.lua

@@ -52,6 +52,13 @@ local devices = {
     SUPPORTED_BUTTON_VALUES = { "pushed" },
     NUMBER_OF_BUTTONS = 3
   },
+  BUTTON_PUSH_HELD_3 = {
+    MATCHING_MATRIX = {
+      { mfr = "Samsung Electronics", model = "SAMSUNG-ITM-Z-005" },
+    },
+    SUPPORTED_BUTTON_VALUES = { "pushed", "held" },
+    NUMBER_OF_BUTTONS = 3
+  },
   BUTTON_PUSH_4 = {
     MATCHING_MATRIX = {
       { mfr = "LDS", model = "ZBT-CCTSwitch-D0001" },