Edit Mode

Starting from 1.1.0.5-RC6 there is only 1 edit mode left to manage the waypoints and destinations.

General information

A left click on the edit button will activate the edit mode, a right click will only show the lines and target points.
If a mode is active, the state will stay active even if you switch the vehicle. Also this state will be saved in the user settings.
If the record mode is active and you switch the vehicle, the recording will be stopped.
Auto connecting waypoints which are created by mouse and LCTRL will only work in SP, not in MP or on a dedi server.
If the option to show the waypoints above tractor is active, you can move, delete and create them only there and not on the ground.

Create a waypoint = press & keep LCTRL and then click LMB to create it, after creation release both
Create a waypoint with a connection to the last created one = it's like creating a waypoint, but don't release LCTRL
Select a waypoint = click LMB, the waypoint bubble will turn green
Move a waypoint = catch waypoint bubble turned blue, keep RMB pressed to fetch and move it
Delete a waypoint = catch waypoint bubble turned blue, press & keep LALT, then click LMB to delete it
Connect two waypoints (green line = one way) = select the 1st waypoint, then click on the 2nd (with LMB)
Connect two waypoints (blue line = two way) = if green line exists select the 2nd waypoint, then click the 1st (with LMB)
Connect two waypoints (light blue line = backward) = press & keep LSHIFT, select the 1st waypoint, then click the 2nd (with LMB)
Toggle showing waypoint bubbles = press RCTRL (is activated as default at every start = showing waypoint bubbles)