Make numFeatures automatic

- Update documentation

include/xrpl/protocol/Feature.h

@@ -33,35 +33,35 @@
  *
  * Steps required to add new features to the code:
  *
- * 1) In this file, increment `numFeatures` and add a uint256 declaration
- *    for the feature at the bottom
- * 2) Add a uint256 definition for the feature to the corresponding source
- *    file (Feature.cpp). Use `registerFeature` to create the feature with
- *    the feature's name, `Supported::no`, and `VoteBehavior::DefaultNo`. This
- *    should be the only place the feature's name appears in code as a string.
- * 3) Use the uint256 as the parameter to `view.rules.enabled()` to
- *    control flow into new code that this feature limits.
- * 4) If the feature development is COMPLETE, and the feature is ready to be
- *    SUPPORTED, change the `registerFeature` parameter to Supported::yes.
- * 5) When the feature is ready to be ENABLED, change the `registerFeature`
- *    parameter to `VoteBehavior::DefaultYes`.
+ * 1) Add a the appropriate XRPL_FEATURE or XRPL_FIX macro definition for the
+ *    feature to features.macro with the feature's name, `Supported::no`, and
+ *    `VoteBehavior::DefaultNo`.
+ *
+ * 2) Use the generated variable name as the parameter to `view.rules.enabled()`
+ *    to control flow into new code that this feature limits. (featureName or
+ *    fixName)
+ *
+ * 3) If the feature development is COMPLETE, and the feature is ready to be
+ *    SUPPORTED, change the macro parameter in features.macro to Supported::yes.
+ *
+ * 4) When the feature is ready to be ENABLED, change the macro parameter in
+ * features.macro parameter to `VoteBehavior::DefaultYes`.
+ *
  * In general, any newly supported amendments (`Supported::yes`) should have
  * a `VoteBehavior::DefaultNo` for at least one full release cycle. High
  * priority bug fixes can be an exception to this rule of thumb.
  *
  * When a feature has been enabled for several years, the conditional code
  * may be removed, and the feature "retired". To retire a feature:
- * 1) Remove the uint256 declaration from this file.
- * 2) MOVE the uint256 definition in Feature.cpp to the "retired features"
- *    section at the end of the file.
- * 3) CHANGE the name of the variable to start with "retired".
- * 4) CHANGE the parameters of the `registerFeature` call to `Supported::yes`
- *    and `VoteBehavior::DefaultNo`.
+ *
+ * 1) MOVE the macro definition in features.macro to the "retired features"
+ *    section at the end of the file, and change the macro to XRPL_RETIRE.
+ *
  * The feature must remain registered and supported indefinitely because it
  * still exists in the ledger, but there is no need to vote for it because
- * there's nothing to vote for. If it is removed completely from the code, any
- * instances running that code will get amendment blocked. Removing the
- * feature from the ledger is beyond the scope of these instructions.
+ * there's nothing to vote for. If the definition is removed completely from the
+ * code, any instances running that code will get amendment blocked. Removing
+ * the feature from the ledger is beyond the scope of these instructions.
  *
  */
 
@@ -80,7 +80,27 @@ namespace detail {
 // Feature.cpp. Because it's only used to reserve storage, and determine how
 // large to make the FeatureBitset, it MAY be larger. It MUST NOT be less than
 // the actual number of amendments. A LogicError on startup will verify this.
-static constexpr std::size_t numFeatures = 88;
+static constexpr std::size_t numFeatures = 0
+#pragma push_macro("XRPL_FEATURE")
+#undef XRPL_FEATURE
+#pragma push_macro("XRPL_FIX")
+#undef XRPL_FIX
+#pragma push_macro("XRPL_RETIRE")
+#undef XRPL_RETIRE
+
+#define XRPL_FEATURE(name, supported, vote) +1
+#define XRPL_FIX(name, supported, vote) +1
+#define XRPL_RETIRE(name) +1
+
+#include <xrpl/protocol/detail/features.macro>
+
+#undef XRPL_RETIRE
+#pragma pop_macro("XRPL_RETIRE")
+#undef XRPL_FIX
+#pragma pop_macro("XRPL_FIX")
+#undef XRPL_FEATURE
+#pragma pop_macro("XRPL_FEATURE")
+    ;
 
 /** Amendments that this server supports and the default voting behavior.
    Whether they are enabled depends on the Rules defined in the validated
@@ -320,12 +340,17 @@ foreachFeature(FeatureBitset bs, F&& f)
 #undef XRPL_FEATURE
 #pragma push_macro("XRPL_FIX")
 #undef XRPL_FIX
+#pragma push_macro("XRPL_RETIRE")
+#undef XRPL_RETIRE
 
 #define XRPL_FEATURE(name, supported, vote) extern uint256 const feature##name;
 #define XRPL_FIX(name, supported, vote) extern uint256 const fix##name;
+#define XRPL_RETIRE(name)
 
 #include <xrpl/protocol/detail/features.macro>
 
+#undef XRPL_RETIRE
+#pragma pop_macro("XRPL_RETIRE")
 #undef XRPL_FIX
 #pragma pop_macro("XRPL_FIX")
 #undef XRPL_FEATURE

include/xrpl/protocol/detail/features.macro

@@ -23,6 +23,9 @@
 #if !defined(XRPL_FIX)
 #error "undefined macro: XRPL_FIX"
 #endif
+#if !defined(XRPL_RETIRE)
+#error "undefined macro: XRPL_RETIRE"
+#endif
 
 // Add new amendments to the top of this list.
 // Keep it sorted in reverse chronological order.
@@ -121,3 +124,22 @@ XRPL_FIX    (NFTokenDirV1,          Supported::yes, VoteBehavior::Obsolete)
 XRPL_FEATURE(NonFungibleTokensV1,   Supported::yes, VoteBehavior::Obsolete)
 XRPL_FEATURE(CryptoConditionsSuite, Supported::yes, VoteBehavior::Obsolete)
 
+// The following amendments have been active for at least two years. Their
+// pre-amendment code has been removed and the identifiers are deprecated.
+// All known amendments and amendments that may appear in a validated
+// ledger must be registered either here or above with the "active" amendments
+XRPL_RETIRE(MultiSign)
+XRPL_RETIRE(TrustSetAuth)
+XRPL_RETIRE(FeeEscalation)
+XRPL_RETIRE(PayChan)
+XRPL_RETIRE(CryptoConditions)
+XRPL_RETIRE(TickSize)
+XRPL_RETIRE(fix1368)
+XRPL_RETIRE(Escrow)
+XRPL_RETIRE(fix1373)
+XRPL_RETIRE(EnforceInvariants)
+XRPL_RETIRE(SortedDirectories)
+XRPL_RETIRE(fix1201)
+XRPL_RETIRE(fix1512)
+XRPL_RETIRE(fix1523)
+XRPL_RETIRE(fix1528)

src/libxrpl/protocol/Feature.cpp

@@ -250,12 +250,9 @@ FeatureCollections::registerFeature(
     Feature const* i = getByName(name);
     if (!i)
     {
-        // If this check fails, and you just added a feature, increase the
-        // numFeatures value in Feature.h
         check(
             features.size() < detail::numFeatures,
-            "More features defined than allocated. Adjust numFeatures in "
-            "Feature.h.");
+            "More features defined than allocated.");
 
         auto const f = sha512Half(Slice(name.data(), name.size()));
 
@@ -424,45 +421,26 @@ featureToName(uint256 const& f)
 #undef XRPL_FEATURE
 #pragma push_macro("XRPL_FIX")
 #undef XRPL_FIX
+#pragma push_macro("XRPL_RETIRE")
+#undef XRPL_RETIRE
 
 #define XRPL_FEATURE(name, supported, vote) \
     uint256 const feature##name = registerFeature(#name, supported, vote);
 #define XRPL_FIX(name, supported, vote) \
     uint256 const fix##name = registerFeature("fix" #name, supported, vote);
+#define XRPL_RETIRE(name)                                                     \
+    [[deprecated("The referenced amendment has been retired"), maybe_unused]] \
+    uint256 const retired##name = retireFeature(#name);
 
 #include <xrpl/protocol/detail/features.macro>
 
+#undef XRPL_RETIRE
+#pragma pop_macro("XRPL_RETIRE")
 #undef XRPL_FIX
 #pragma pop_macro("XRPL_FIX")
 #undef XRPL_FEATURE
 #pragma pop_macro("XRPL_FEATURE")
 
-// clang-format off
-
-// The following amendments have been active for at least two years. Their
-// pre-amendment code has been removed and the identifiers are deprecated.
-// All known amendments and amendments that may appear in a validated
-// ledger must be registered either here or above with the "active" amendments
-[[deprecated("The referenced amendment has been retired"), maybe_unused]]
-uint256 const
-    retiredMultiSign         = retireFeature("MultiSign"),
-    retiredTrustSetAuth      = retireFeature("TrustSetAuth"),
-    retiredFeeEscalation     = retireFeature("FeeEscalation"),
-    retiredPayChan           = retireFeature("PayChan"),
-    retiredCryptoConditions  = retireFeature("CryptoConditions"),
-    retiredTickSize          = retireFeature("TickSize"),
-    retiredFix1368           = retireFeature("fix1368"),
-    retiredEscrow            = retireFeature("Escrow"),
-    retiredFix1373           = retireFeature("fix1373"),
-    retiredEnforceInvariants = retireFeature("EnforceInvariants"),
-    retiredSortedDirectories = retireFeature("SortedDirectories"),
-    retiredFix1201           = retireFeature("fix1201"),
-    retiredFix1512           = retireFeature("fix1512"),
-    retiredFix1523           = retireFeature("fix1523"),
-    retiredFix1528           = retireFeature("fix1528");
-
-// clang-format on
-
 // All of the features should now be registered, since variables in a cpp file
 // are initialized from top to bottom.
 //