GOfax.IP

GOfax.IP is a HylaFAX backend/connector providing Fax over IP support for HylaFAX using FreeSWITCH and SpanDSP through FreeSWITCH's mod_spandsp.

In contrast to solutions like t38modem, iaxmodem and mod_spandsp's softmodem feature, GOfax.IP does not emulate fax modem devices but replaces HylaFAX's faxgetty and faxsend processes to communicate directly with FreeSWITCH using FreeSWITCH's Event Socket interface.

GOfax.IP is designed to provide a standalone fax server together with HylaFAX and a minimal FreeSWITCH setup; the necessary FreeSWITCH configuration is provided.

Features

• SIP connectivity to PBXes, Media Gateways/SBCs and SIP Providers with or without registration
• Failover using multiple gateways
• Support for Fax over IP using T.38 and/or T.30 audio over G.711
• Native SIP endpoint, no modem emulation
• Support for an arbitrary number of lines (depending on the used hardware)
• Extensive logging and reporting: Writing xferfaxlog for sent/received faxes; Writing session log files for all sent/received faxes
• Support for modem status reporting/querying using HylaFAX native tools and clients: faxstat etc.
• Call screening for incoming faxes using HylaFAX' DynamicConfig
• Call screening for outgoing faxes using GOfax.IP' DynamicConfigOutgoing

Components

GOfax.IP consists of two commands that replace their native HylaFAX conterparts

• gofaxsend is used instead of HylaFAX' faxsend
• gofaxd is used instead of HylaFAX' faxgetty. Only one instance of gofaxd is necessary regardless of the number of receiving channels.

Installation

We recommend running GOfax.IP on Debian 10 ("Buster"), so these instructions cover Debian in detail. Of course it is possible to install and use GOfax.IP on other Linux distributions and possibly other Unixes supported by golang, FreeSWITCH and HylaFAX.

Dependencies

The official FreeSWITCH Debian repository can be used to obtain and install all required FreeSWITCH packages. First you need to create a Signalwire API Token, you need it to use the Debian Repo. Follow this guide: https://freeswitch.org/confluence/display/FREESWITCH/HOWTO+Create+a+SignalWire+Personal+Access+Token

After you created the api token you can continue with adding the repository

TOKEN=YOURSIGNALWIRETOKEN
 
apt-get update && apt-get install -y gnupg2 wget lsb-release
 
wget --http-user=signalwire --http-password=$TOKEN -O /usr/share/keyrings/signalwire-freeswitch-repo.gpg https://freeswitch.signalwire.com/repo/deb/debian-release/signalwire-freeswitch-repo.gpg
 
echo "machine freeswitch.signalwire.com login signalwire password $TOKEN" > /etc/apt/auth.conf
echo "deb [signed-by=/usr/share/keyrings/signalwire-freeswitch-repo.gpg] https://freeswitch.signalwire.com/repo/deb/debian-release/ `lsb_release -sc` main" > /etc/apt/sources.list.d/freeswitch.list
echo "deb-src [signed-by=/usr/share/keyrings/signalwire-freeswitch-repo.gpg] https://freeswitch.signalwire.com/repo/deb/debian-release/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list
 
apt-get update

Installing packages

apt-get update
apt-get install hylafax-server freeswitch freeswitch-mod-commands freeswitch-mod-dptools freeswitch-mod-event-socket freeswitch-mod-sofia freeswitch-mod-spandsp freeswitch-mod-tone-stream freeswitch-mod-db freeswitch-mod-syslog freeswitch-mod-logfile

GOfax.IP

See releases for amd64 Debian packages.

Use dpkg -i to install the latest package.

See Building for instructions on how to build the binaries or Debian packages from source. This is only necessary if you want to use the latest/untested version or if you need another architecture than amd64!

Configuration

FreeSWITCH

FreeSWITCH has to be able to place received faxes in HylaFAX' recvq spool. The simplest way to achieve this is to run FreeSWITCH as the uucp user.

sudo chown -R uucp.uucp /var/log/freeswitch
sudo chown -R uucp.uucp /var/lib/freeswitch
sudo cp /usr/share/doc/gofaxip/examples/freeswitch.service /etc/systemd/system/
sudo systemctl daemon-reload

A very minimal FreeSWITCH configuration for GOfax.IP is provided in the repository.

sudo cp -r /usr/share/doc/gofaxip/examples/freeswitch/* /etc/freeswitch/

The SIP gateway to use has to be configured in /etc/freeswitch/gateways/default.xml. It is possible to configure multiple gateways for GOfax.IP.

Depending on your installation/SIP provider you have to either:

• edit /etc/freeswitch/vars.xml and adapt the IP address FreeSWITCH should use for SIP/RTP.
• remove the entire section concerning the sofia_ip variable (parameters sip-port, rtp-ip, sip-ip, ext-rtp-ip, ext-sip-ip)

GOfax.IP

Currently GOfax.IP does not use HylaFAX configuration files at all. All configurations for both gofaxd and gofaxsend are made in the INI-style configuration file /etc/gofax.conf which has to be customized.

HylaFAX

To make HylaFAX use gofaxsend for sending, the SendFaxCmd option has to be added to /etc/hylafax/config:

SendFaxCmd:		"/usr/bin/gofaxsend"

As sending batches of multiple jobs in one transmission is not supported by mod_spandsp, it is recommended to disable Hylafax' Batchmode in /etc/hylafax/config:

MaxBatchJobs:		1

A sample FaxDispatch script is included in /usr/share/doc/gofaxip/examples/hylafax/FaxDispatch, the available CALLID values set by gofaxd are documented there.

To have faxstat show modem/channel usage in it's status output, a modem configuration file has to exist. Note that GOfax.IP currently does not use HylaFAX' modem configuration files, so they can be empty, but they have to exist for faxstat to show the modem.

If /etc/gofax.conf is configured to manage 5 (virtual) modems, you have to create the (empty) configuration files manually:

sudo touch /var/spool/hylafax/etc/config.freeswitch{0..4}

Operation

Starting

sudo systemctl start freeswitch
sudo systemctl start gofaxip
sudo systemctl restart hylafax

Logging

GOfax.IP logs everything it does to syslog.

Advanced Features

As the virtual modems visible in HylaFAX are not tied to preconfigured lines but assigned dynamically, it is not possible to assign static telephone numbers to individual modems. Instead, GOfax.IP can query a DynamicConfig script before trying to send outgoing faxes which works similarly to the DynamicConfig feature in HylaFAX' faxgetty. Using the sender's user id (owner), it can be used to set the Callerid, TSI and Header for each individual outgoing fax. It is also possible to reject an outgoing fax.

DynamicConfig for incoming faxes

DynamicConfig as used and documented in HylaFAX can be used by GOfax.IP. One option per line can be set, comments are note allowed.

Parameters The following arguments are provided to the DynamicConfig script for incoming faxes:

• Used modem name
• Caller-ID number
• Caller-ID name
• Destination (SIP To-User)
• Gateway name

Supported options

• RejectCall: true will reject the call. Default is to allow the call
• LocalIdentifier: +1 234 567 will assign a CSI (Called Station Identifier) that will be used for this fax reception. The Default CSI can be set in gofax.conf in the ident parameter.

DynamicConfig for outgoing faxes

This is a special feature of GOfax.IP, a similar mechanism does not exist in traditional HylaFAX installations.

Parameters The following arguments are provided to the DynamicConfig script for outgoing faxes:

• Used modem name
• Owner (User ID as set sendfax -o or the FAXUSER environment variable, optinally verified by PAM)
• Destination number
• Job ID

Supported options

• RejectCall: true will reject the outgoing fax. The fax will instantly fail and not be retried.
• LocalIdentifier: +1 234 567 will assign a TSI (Transmitting Station Identifier) for this call. The Default TSI can be set in gofax.conf in the ident parameter.
• TagLine: ACME will assign a header string to be shown on the top of each page. This does not support format strings as used by HylaFAX; if defined a header string is always shown with the current timestamp and page number as set by SpanDSP.
• FAXNumber: 1337 will set the outgoing caller id number as used by FreeSWITCH when originating the call.
• Gateway: somegw or Gateway: gw1,gw2 will set the SIP Gateway to use for sending the fax. The gateway has to be configured in FreeSWITCH. When multiple comma delimited gateways are given they will be tried in order. By default the gateway configured in GOFax.IP's configuration file is used.
• CallPrefix: 99 will be prefixed to the original destination number and override the parameter callprefix from gofax.conf

Fallback from T.38 to SpanDSP softmodem

In rare cases we noticed problems with certain remote stations that could not successfully work with some T.38 Gateways we tested. In the case we observed, the remote tried to use T.4 1-D compression with ECM enabled. After disabling T.38 the fax was successfully received.

To work around this rare sort of problem and improve compatiblity, GOfax.IP can identify failed transmissions and dynamically disable T.38 for the affected remote station and have FreeSWITCH use SpanDSP's pure software fax implementation. The station is identified by caller id and saved in FreeSWITCH's mod_db. To enable this feature, set softmodemfallback = true in gofax.conf.

Note that this will only affect all subsequent calls from/to the remote station, assuming that the remote station will retry a failed fax. Entries in the fallback list are persistant and will not be expired by GOfax.IP. It is possible however to manually expire entries from mod_db. The used <realm>/<key>/<value> is fallback/<callerid>/<unix_timestamp>, with unix_timestamp being the time when the entry was added. See https://freeswitch.org/confluence/display/FREESWITCH/mod_db for details on mod_db.

A transmission is regarded as failed and added to the fallback database if SpanDSP reports the transmission as not successful and one of the following conditions apply:

• Negotiation has happened multiple times
• Negotiation was successful but transmitted pages contain bad rows

Setting the Displayname for outgoing faxes

Normally the Displayname is populated with the content of the sender field from the qfile. If you dont want to expose this information you can use the parameter cidname in gofax.conf to set the Displayname to the Calleridnum or any static string.

Override transmission parameters for individual destinations

It is possible to override transmission parameters for individual destinations by inserting entries to FreeSWITCHs internal database (mod_db). Before originating the transmission, gofaxsend checks if a matching database entry exists. The realm is override-$destination, where $destination is the target number. The found keys are used as parameters for the outgoing channel of FreeSWITCH.

Example:

Disable T.38 transmission for destination 012345:

fs_cli -x 'db insert/override-012345/fax_enable_t38/false'

See https://freeswitch.org/confluence/display/FREESWITCH/mod_spandsp#mod_spandsp-Controllingtheapp for mod_spandsp parameters.

See https://freeswitch.org/confluence/display/FREESWITCH/mod_db for a reference on how to use mod_db.

Building

GOfax.IP is implemented in Go, it can be built using go get.

go get github.com/gonicus/gofaxip/...

This will produce the binaries gofaxd and gofaxsend.

Build debian package

You need golang and dh-golang from jessie-backports.

With golang package from debian repository:

apt update
apt install git dh-golang dh-systemd golang
git clone https://github.com/gonicus/gofaxip
cd gofaxip
dpkg-buildpackage -us -uc -rfakeroot -b

If you dont have golang from debian repository installed use -d to ignore builddeps.