Remove unnecessary spaces between words - part 2 (github#35381)

Co-authored-by: Alex Nguyen <[email protected]>

content/code-security/adopting-github-advanced-security-at-scale/phase-6-rollout-and-scale-secret-scanning.md

@@ -58,7 +58,7 @@ Once enabled, you can do the following:
 
 1. **Provide guidance**: Configure a custom link in the message that contributors will see if their push is blocked by {% data variables.product.prodname_secret_scanning %}. The linked resource can provide guidance for contributors on how to resolve the blocked push. For more information, see "[AUTOTITLE](/code-security/secret-scanning/enabling-secret-scanning-features/enabling-push-protection-for-your-repository)."
 
-1. **Notify**: Define a webhook that specifically tracks {% data variables.secret-scanning.alerts %} created when someone bypasses push protection by using the alert property `"push_protection_bypassed": true`. Or, use the API to get updates on which  {% data variables.secret-scanning.alerts %} were the result of a push protection bypass by filtering the list of results for `"push_protection_bypassed": true`. For more information, see "[AUTOTITLE](/code-security/getting-started/auditing-security-alerts)."
+1. **Notify**: Define a webhook that specifically tracks {% data variables.secret-scanning.alerts %} created when someone bypasses push protection by using the alert property `"push_protection_bypassed": true`. Or, use the API to get updates on which {% data variables.secret-scanning.alerts %} were the result of a push protection bypass by filtering the list of results for `"push_protection_bypassed": true`. For more information, see "[AUTOTITLE](/code-security/getting-started/auditing-security-alerts)."
 
 {%- ifversion security-overview-push-protection-metrics-page %}
 

content/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages.md

@@ -109,8 +109,8 @@ steps:
     echo 'If you are using a "manual" build mode for one or more of the' \
       'languages you are analyzing, replace this with the commands to build' \
       'your code, for example:'
-    echo '  make bootstrap'
-    echo '  make release'
+    echo ' make bootstrap'
+    echo ' make release'
     exit 1
 ```
 
@@ -190,7 +190,7 @@ The basic {% data variables.code-scanning.codeql_workflow %} uses the `autobuild
 
 You can only specify manual build steps if you have enabled advanced setup, see "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/configuring-advanced-setup-for-code-scanning#configuring-advanced-setup-for-a-repository)."
 
-{% data reusables.code-scanning.autobuild-add-build-steps %} For information on how to edit the workflow file, see  "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning#editing-a-code-scanning-workflow)."
+{% data reusables.code-scanning.autobuild-add-build-steps %} For information on how to edit the workflow file, see "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning#editing-a-code-scanning-workflow)."
 
 {% ifversion codeql-no-build %}
 Update your workflow to define the `build-mode` as `manual`.

content/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.md

@@ -38,7 +38,7 @@ You can run {% data variables.product.prodname_code_scanning %} on {% data varia
 
 With advanced setup for {% data variables.product.prodname_code_scanning %}, you can customize a {% data variables.product.prodname_code_scanning %} workflow for granular control over your configuration. For more information, see "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/configuring-advanced-setup-for-code-scanning)."
 
-{% data variables.product.prodname_codeql %} analysis is just one type of {% data variables.product.prodname_code_scanning %} you can do in {% data variables.product.prodname_dotcom %}. {% data variables.product.prodname_marketplace %}{% ifversion ghes %} on  {% data variables.product.prodname_dotcom_the_website %}{% endif %} contains other {% data variables.product.prodname_code_scanning %} workflows you can use. {% ifversion fpt or ghec %}You can find a selection of these on the "Get started with {% data variables.product.prodname_code_scanning %}" page, which you can access from the **{% octicon "shield" aria-hidden="true" %} Security** tab.{% endif %} The specific examples given in this article relate to the {% data variables.code-scanning.codeql_workflow %} file.
+{% data variables.product.prodname_codeql %} analysis is just one type of {% data variables.product.prodname_code_scanning %} you can do in {% data variables.product.prodname_dotcom %}. {% data variables.product.prodname_marketplace %}{% ifversion ghes %} on {% data variables.product.prodname_dotcom_the_website %}{% endif %} contains other {% data variables.product.prodname_code_scanning %} workflows you can use. {% ifversion fpt or ghec %}You can find a selection of these on the "Get started with {% data variables.product.prodname_code_scanning %}" page, which you can access from the **{% octicon "shield" aria-hidden="true" %} Security** tab.{% endif %} The specific examples given in this article relate to the {% data variables.code-scanning.codeql_workflow %} file.
 
 ## Editing a {% data variables.product.prodname_code_scanning %} workflow
 
@@ -156,7 +156,7 @@ jobs:
 
 {% ifversion ghes %}You must ensure that Git is in the PATH variable on your self-hosted runners.{% else %}If you use a self-hosted runner, you must ensure that Git is in the PATH variable.{% endif %} For more information, see "[AUTOTITLE](/actions/hosting-your-own-runners/managing-self-hosted-runners/about-self-hosted-runners)" and "[AUTOTITLE](/actions/hosting-your-own-runners/managing-self-hosted-runners/adding-self-hosted-runners)."
 
-For recommended specifications (RAM, CPU cores, and disk) for running {% data variables.product.prodname_codeql %} analysis{% ifversion not ghes %} on self-hosted machines{% endif %}, see  "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/recommended-hardware-resources-for-running-codeql)."
+For recommended specifications (RAM, CPU cores, and disk) for running {% data variables.product.prodname_codeql %} analysis{% ifversion not ghes %} on self-hosted machines{% endif %}, see "[AUTOTITLE](/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/recommended-hardware-resources-for-running-codeql)."
 
 ## Specifying the location for {% data variables.product.prodname_codeql %} databases
 
@@ -336,7 +336,7 @@ If your workflow uses packs that are published on a {% data variables.product.pr
 
 The package patterns in the registries list are examined in order, so you should generally place the most specific package patterns first. The values for `token` must be a {% data variables.product.pat_v1 %} generated by the GitHub instance you are downloading from with the `read:packages` permission.
 
-Notice the `|` after the `registries` property name. This is important since  {% data variables.product.prodname_actions %} inputs can only accept strings. Using the `|` converts the subsequent text to a string, which is parsed later by the {% data reusables.actions.action-codeql-action-init %} action.
+Notice the `|` after the `registries` property name. This is important since {% data variables.product.prodname_actions %} inputs can only accept strings. Using the `|` converts the subsequent text to a string, which is parsed later by the {% data reusables.actions.action-codeql-action-init %} action.
 
 ### Using queries in QL packs
 
@@ -549,7 +549,7 @@ This step in a {% data variables.product.prodname_actions %} workflow file uses
 You can use the same approach to specify any valid configuration options in the workflow file.
 
 > [!TIP]
-> You can share one configuration across multiple repositories using  {% data variables.product.prodname_actions %} variables. One benefit of this approach is that you can update the configuration in a single place without editing the workflow file.
+> You can share one configuration across multiple repositories using {% data variables.product.prodname_actions %} variables. One benefit of this approach is that you can update the configuration in a single place without editing the workflow file.
 >
 > In the following example, `vars.CODEQL_CONF` is a {% data variables.product.prodname_actions %} variable. Its value can be the contents of any valid configuration file. For more information, see "[AUTOTITLE](/actions/learn-github-actions/variables#defining-configuration-variables-for-multiple-workflows)."
 >

content/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning.md

@@ -164,7 +164,7 @@ Any valid SARIF 2.1.0 output file can be uploaded, however, {% data variables.pr
 
 ### `reportingDescriptor` object
 
-This is where you store details of the rules that are run during analysis. Information in these objects should change infrequently, typically when you update the tool. For more information,  see "[Understanding rules and results](#understanding-rules-and-results)" above.
+This is where you store details of the rules that are run during analysis. Information in these objects should change infrequently, typically when you update the tool. For more information, see "[Understanding rules and results](#understanding-rules-and-results)" above.
 
 | Name | Required | Description |
 |----|----|----|
@@ -182,7 +182,7 @@ This is where you store details of the rules that are run during analysis. Infor
 
 ### `result` object
 
-Each `result` object contains details for one alert in the codebase. Within the `results` object, you can reference the rule that detected the alert. For more information,  see "[Understanding rules and results](#understanding-rules-and-results)" above.
+Each `result` object contains details for one alert in the codebase. Within the `results` object, you can reference the rule that detected the alert. For more information, see "[Understanding rules and results](#understanding-rules-and-results)" above.
 
 {% data reusables.code-scanning.upload-sarif-alert-limit %}
 
@@ -194,7 +194,7 @@ Each `result` object contains details for one alert in the codebase. Within the
 | `level`| {% octicon "x" aria-label="Optional" %} | The severity of the result. This level overrides the default severity defined by the rule. {% data variables.product.prodname_code_scanning_caps %} uses the level to filter results by severity on {% data variables.product.prodname_dotcom %}.
 | `message.text`| {% octicon "check" aria-label="Required" %} | A message that describes the result. {% data variables.product.prodname_code_scanning_caps %} displays the message text as the title of the result. Only the first sentence of the message will be displayed when visible space is limited.
 | `locations[]`| {% octicon "check" aria-label="Required" %} | The set of locations where the result was detected up to a maximum of 10. Only one location should be included unless the problem can only be corrected by making a change at every specified location. **Note:** At least one location is required for {% data variables.product.prodname_code_scanning %} to display a result. {% data variables.product.prodname_code_scanning_caps %} will use this property to decide which file to annotate with the result. Only the first value of this array is used. All other values are ignored.
-| `partialFingerprints`| {% octicon "check" aria-label="Required" %} | A set of strings used to track the unique identity of the result. {% data variables.product.prodname_code_scanning_caps %} uses `partialFingerprints` to accurately identify which results are the same across commits and branches. {% data variables.product.prodname_code_scanning_caps %} will attempt to use `partialFingerprints` if they exist. If you are uploading third-party SARIF files with the `upload-action`, the action will create `partialFingerprints` for you when they are not included in the SARIF file. For more information, see "[Providing data to track code scanning alerts across runs](#providing-data-to-track-code-scanning-alerts-across-runs)."  **Note:** {% data variables.product.prodname_code_scanning_caps %} only uses the `primaryLocationLineHash`.
+| `partialFingerprints`| {% octicon "check" aria-label="Required" %} | A set of strings used to track the unique identity of the result. {% data variables.product.prodname_code_scanning_caps %} uses `partialFingerprints` to accurately identify which results are the same across commits and branches. {% data variables.product.prodname_code_scanning_caps %} will attempt to use `partialFingerprints` if they exist. If you are uploading third-party SARIF files with the `upload-action`, the action will create `partialFingerprints` for you when they are not included in the SARIF file. For more information, see "[Providing data to track code scanning alerts across runs](#providing-data-to-track-code-scanning-alerts-across-runs)." **Note:** {% data variables.product.prodname_code_scanning_caps %} only uses the `primaryLocationLineHash`.
 | `codeFlows[].threadFlows[].locations[]`| {% octicon "x" aria-label="Optional" %} | An array of `location` objects for a `threadFlow` object, which describes the progress of a program through a thread of execution. A `codeFlow` object describes a pattern of code execution used to detect a result. If code flows are provided, {% data variables.product.prodname_code_scanning %} will expand code flows on {% data variables.product.prodname_dotcom %} for the relevant result. For more information, see the [`location` object](#location-object).
 | `relatedLocations[]`| {% octicon "x" aria-label="Optional" %} | A set of locations relevant to this result. {% data variables.product.prodname_code_scanning_caps %} will link to related locations when they are embedded in the result message. For more information, see the [`location` object](#location-object).
 

content/code-security/code-scanning/integrating-with-code-scanning/uploading-a-sarif-file-to-github.md

@@ -49,7 +49,7 @@ You can upload the results using {% data variables.product.prodname_actions %},
 
 ## Uploading a {% data variables.product.prodname_code_scanning %} analysis with {% data variables.product.prodname_actions %}
 
-To use {% data variables.product.prodname_actions %} to upload a third-party SARIF file to a repository, you'll need a  workflow. For more information, see "[AUTOTITLE](/actions/learn-github-actions)."
+To use {% data variables.product.prodname_actions %} to upload a third-party SARIF file to a repository, you'll need a workflow. For more information, see "[AUTOTITLE](/actions/learn-github-actions)."
 
 Your workflow will need to use the `upload-sarif` action, which is part of the `github/codeql-action` repository. It has input parameters that you can use to configure the upload. The main input parameters you'll use are:
 
@@ -58,7 +58,7 @@ Your workflow will need to use the `upload-sarif` action, which is part of the `
 
 For more information, see the {% ifversion codeql-action-node16-deprecated %}[`upload-sarif` action](https://github.com/github/codeql-action/tree/v3/upload-sarif){% else %}[`upload-sarif` action](https://github.com/github/codeql-action/tree/v2/upload-sarif){% endif %}.
 
-The `upload-sarif` action can be configured to run when the `push` and `scheduled` event occur. For more information about {% data variables.product.prodname_actions %}  events, see "[AUTOTITLE](/actions/using-workflows/events-that-trigger-workflows)."
+The `upload-sarif` action can be configured to run when the `push` and `scheduled` event occur. For more information about {% data variables.product.prodname_actions %} events, see "[AUTOTITLE](/actions/using-workflows/events-that-trigger-workflows)."
 
 If your SARIF file doesn't include `partialFingerprints`, the `upload-sarif` action will calculate the `partialFingerprints` field for you and attempt to prevent duplicate alerts. {% data variables.product.prodname_dotcom %} can only create `partialFingerprints` when the repository contains both the SARIF file and the source code used in the static analysis. For more information about preventing duplicate alerts, see "[AUTOTITLE](/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning#providing-data-to-track-code-scanning-alerts-across-runs)."
 

content/code-security/code-scanning/integrating-with-code-scanning/using-code-scanning-with-your-existing-ci-system.md

@@ -33,15 +33,15 @@ You can add the {% data variables.product.prodname_codeql_cli %} to your third-p
 
 The {% data variables.product.prodname_codeql_cli %} is a standalone, command-line tool that you can use to analyze code. For more information, see "[AUTOTITLE](/code-security/codeql-cli/getting-started-with-the-codeql-cli/about-the-codeql-cli)."
 
-Alerts for {% data variables.product.prodname_code_scanning %} that you generate externally are displayed in the same way as those for  {% data variables.product.prodname_code_scanning %} that you generate within {% data variables.product.prodname_dotcom %}. {% data reusables.code-scanning.about-multiple-configurations-link %}
+Alerts for {% data variables.product.prodname_code_scanning %} that you generate externally are displayed in the same way as those for {% data variables.product.prodname_code_scanning %} that you generate within {% data variables.product.prodname_dotcom %}. {% data reusables.code-scanning.about-multiple-configurations-link %}
 
 {% data reusables.code-scanning.upload-sarif-ghas %}
 
 ## Setting up your analysis tool
 
 You will first need to download your analysis tool of choice and set it up with your CI system.
 
-If you are using the {% data variables.product.prodname_codeql_cli %}, you need to make the full contents of the {% data variables.product.prodname_codeql_cli %} bundle available to every CI server that you want to run {% data variables.product.prodname_codeql %} {% data variables.product.prodname_code_scanning %} analysis on.  For more information, see "[AUTOTITLE](/code-security/codeql-cli/getting-started-with-the-codeql-cli/setting-up-the-codeql-cli)."
+If you are using the {% data variables.product.prodname_codeql_cli %}, you need to make the full contents of the {% data variables.product.prodname_codeql_cli %} bundle available to every CI server that you want to run {% data variables.product.prodname_codeql %} {% data variables.product.prodname_code_scanning %} analysis on. For more information, see "[AUTOTITLE](/code-security/codeql-cli/getting-started-with-the-codeql-cli/setting-up-the-codeql-cli)."
 
 Once you've made your analysis tool available to servers in your CI system, you're ready to generate data.
 

content/code-security/code-scanning/managing-code-scanning-alerts/about-code-scanning-alerts.md

@@ -97,7 +97,7 @@ The severity level for a {% data variables.product.prodname_code_scanning %} ale
 * **Severity.** All {% data variables.product.prodname_code_scanning %} alerts have a level of `Error`, `Warning`, or `Note`.
 * **Security severity.** Each security alert found using {% data variables.product.prodname_codeql %} also has a security severity level of `Critical`, `High`, `Medium`, or `Low`.
 
-When an alert has a security severity level, {% data variables.product.prodname_code_scanning %} displays and uses this level in preference to the `severity`. Security severity levels follow the industry-standard Common Vulnerability Scoring System (CVSS) that is also used for advisories in the {% data variables.product.prodname_advisory_database %}.  For more information, see [CVSS: Qualitative Severity Rating Scale](https://www.first.org/cvss/v3.1/specification-document#Qualitative-Severity-Rating-Scale).
+When an alert has a security severity level, {% data variables.product.prodname_code_scanning %} displays and uses this level in preference to the `severity`. Security severity levels follow the industry-standard Common Vulnerability Scoring System (CVSS) that is also used for advisories in the {% data variables.product.prodname_advisory_database %}. For more information, see [CVSS: Qualitative Severity Rating Scale](https://www.first.org/cvss/v3.1/specification-document#Qualitative-Severity-Rating-Scale).
 
 ### Pull request check failures for {% data variables.product.prodname_code_scanning %} alerts