RaspiNukiBridge

Simple Nuki Bridge implementation using asyncio.

Minimal implementation of the Nuki Bridge protocols in python (both HTTP and BLE), I use it on a raspberry pi zero W and a Nuki smartlock V2.
Right now pairing, lock, unlock, unlatch and HTTP callbacks are implemented, it works fine with the Homeassistant Nuki integration and the hass_nuki_ng integration.

Nuki documentation:
https://developer.nuki.io/page/nuki-smart-lock-api-2/2/#heading--lock-action
https://developer.nuki.io/page/nuki-bridge-http-api-1-13/4/#heading--lockstate

This is heavily inspired by the work of Jandebeule.

Installation

Raspberry Pi 3B+ and 4 only

DOWNGRADE Bluez. See comment.

wget http://ftp.hk.debian.org/debian/pool/main/b/bluez/bluez_5.50-1.2~deb10u2_armhf.deb
sudo apt install ./bluez_5.50-1.2~deb10u2_armhf.deb

Reboot the Raspberry Pi

Clone the repository.

git clone https://github.com/dauden1184/RaspiNukiBridge.git

Install the requirements.

pip install -r requirements.txt

Generate a new configuration file.

python . --generate-config > nuki.yaml

This will generate a nuki.yaml file similar to this:

server:
  host: 0.0.0.0
  port: 8080
  name: RaspiNukiBridge
  app_id: xxxxxxxxx
  token: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

app_id and token are generate randomly.
app_id is needed to communicate with the smartlock over bluetooth.
token is the api token used for the HTTP calls (this is needed when configuring the homeassistant nuki integration).

Pair the smartlock (this must be done only once).
You need to find the MAC address of your nuki smartlock, you can use a BLE scanner app.
Press for 6 seconds the button on the nuki to set it in pairing mode (the ring will turn on).
After that:

python . --pair MAC_ADDRESS

Sometimes the bluetooth connection fails, try a few times if it happens.
If the pairing procedure is successfull, you will find these lines on the screen:

INFO:root:Generatig keys for Nuki XX:XX:XX:XX:XX:XX
INFO:root:bridge_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
INFO:root:bridge_private_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
.
. other stuff
.
INFO:root:Pairing completed, nuki_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
INFO:root:Pairing completed, auth_id: xxxxxxxx

You can now edit the nuki.yaml file created before and add those lines like this at the end of the file:

smartlock:
  - address: XX:XX:XX:XX:XX:XX
    bridge_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    bridge_private_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    nuki_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    auth_id: xxxxxxxx

Usage

Test manually

python .  --lock
python .  --unlock

Bridge server for HA

Save the file and start the bridge:

python .

Install either:

1. hass_nuki_ng integration
2. Homeassistant Nuki integration

Advanced

Connection timeout and retries

In case of issues during the bluetooth connection to the nuki device, it is possible to set a higher connection timeout and the number of retries with the fields connection_timeout (default is 10 seconds) and retry (default is 3) like this:

smartlock:
  - address: XX:XX:XX:XX:XX:XX
    bridge_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    bridge_private_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    nuki_public_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    auth_id: xxxxxxxx
    connection_timeout: 30
    retry: 5

Start automatically at boot

Create a new systemd service:

sudo nano /etc/systemd/system/nukibridge.service

Put this content in the file (change 'user' and 'WorkingDirectory' to your needs):

[Unit]
Description=Nuki bridge
After=network-online.target

[Service]
Type=simple
Restart=always
RestartSec=1
User=pi
WorkingDirectory=/home/pi/RaspiNukiBridge/
ExecStart=python .

[Install]
WantedBy=multi-user.target

Enable the service and start it:

sudo systemctl daemon-reload
sudo systemctl enable nukibridge.service
sudo systemctl start nukibridge.service