List and install OpenWRT / LEDE opkg upgradable packages.
Little ash app for easier opkg package upgrades.
You should check for config conflicts after upgrades!
Make sure you have enough space on root before installing stuff!
This script is small enough but SSL support for curl/wget is not!
You also need free space for downloading and installing the packages!
If you use OpenWRT trunk (dev snapshots), you should probably NOT upgrade
Upgrading development versions can soft-brick your device.
You should try to backup your config and do a full install of a later snapshot if you are running dev/trunk.
Main releases are fine (just trunk/snapshots are affected by this).
It is probably the opposite for releases (recommended to upgrade), since you will get security patches if you upgrade those.
root@OpenWrt:~# opkg-upgrade --help
Simple OPKG Updater v0.4.1
Usage: opkg-upgrade [options]
Options:
-V, --version Show program name and version and exits
-h, --help Show this help screen and exits
-i, --install [dir] Install opkg-upgrade to [dir] or /usr/sbin
Leave [dir] empty for default (/usr/sbin)
-u, --upgrade-check Returns SUCCESS if there are updates available
Quiet execution, returns 0 or 1
-l, --list-upgrades Prints the list of available updates and exits
-e, --email-list Prints the list of updates in html email format
Includes subject, mime type and html formated data
-s, --ssmtp <email> Use the system's ssmtp to send update reports
You need to install and configure ssmtp beforehand
-m, --msmtp <email> Use the system's msmtp to send update reports
You need to install and configure msmtp beforehand
-a, --always-send Send e-mail even if there are no updates
By default e-mails are only sent when updates are available
-t, --text-only Send e-mail in plain text format.
By default, e-mails are sent in html format.
-n, --no-opkg-update Skip opkg update at the beginning,
may not find packages if not up to date
-f, --force Do not ask for confirmation,
will update everything available
Notes:
- Short options should not be grouped. You must pass each parameter on its own.
- You must have a working ssmtp or msmtp install to use the email functionality.
Make sure you can send e-mails from it before trying from opkg-upgrade.
Examples:
opkg-upgrade -n -f # run without updating listings and asking for upgrade
opkg-upgrade --install # install to /usr/sbin/opkg-upgrade
opkg-upgrade -l # just print upgrades available
opkg-upgrade -e # just print html formatted email
opkg-upgrade -s '[email protected]' # mail upgrade report if have updates
opkg-upgrade -a -m '[email protected]' # mail upgrade report even if NO updates
opkg-upgrade -u && echo 'upgrades are available' || echo 'no upgrades available'
root@OpenWrt:~# opkg-upgrade
Simple OPKG Updater v0.4.0
Done | Updating package lists
Done | Getting upgradable packages list
Packages available for upgrade: 28
+-----+----------------------------+--------------------------+--------------------------+
| # | Package | Current | Update |
+-----+----------------------------+--------------------------+--------------------------+
| 1 | cgi-io | 2021-09-08-98cef9dd-20 | 2022-08-10-901b0f04-21 |
| 2 | curl | 7.82.0-2 | 7.83.1-4.1 |
| 3 | firewall | 2021-03-23-61db17ed-1 | 2021-03-23-61db17ed-1.1 |
| 4 | htop | 3.1.2-1 | 3.2.1-1 |
| 5 | libcurl4 | 7.82.0-2 | 7.83.1-4.1 |
| 6 | libevdev | 1.12.0-1 | 1.13.0-1 |
| 7 | libiwinfo-data | 2021-04-30-c45f0b58-2.1 | 2022-04-26-dc6847eb-1 |
| 8 | libiwinfo-lua | 2021-04-30-c45f0b58-2.1 | 2022-04-26-dc6847eb-1 |
| 9 | libiwinfo20210430 | 2021-04-30-c45f0b58-2.1 | 2022-04-26-dc6847eb-1 |
| 10 | libudev-zero | 1.0.0-1 | 1.0.1-1 |
| 11 | libustream-wolfssl20201210 | 2022-01-16-868fd881-1 | 2022-01-16-868fd881-2 |
| 12 | luci-app-ddns | git-21.349.33342-b5a40b3 | git-22.123.50005-9139ad4 |
| 13 | luci-app-firewall | git-22.046.85957-59c3392 | git-22.089.67741-3856d50 |
| 14 | luci-app-opkg | git-21.312.69848-4745991 | git-22.273.29015-e01e38c |
| 15 | luci-app-statistics | git-22.072.58464-8cac3cb | git-22.115.68435-0473e99 |
| 16 | luci-base | git-22.046.85957-59c3392 | git-22.304.65299-04257f6 |
| 17 | luci-lib-jsonc | git-19.317.29469-8da8f38 | git-22.097.61937-bc85ba5 |
| 18 | luci-mod-network | git-22.046.85061-dd54dce | git-22.244.54918-77c916e |
| 19 | luci-mod-status | git-22.046.85784-0ac2542 | git-22.089.70019-d4f0b06 |
| 20 | luci-mod-system | git-22.019.40321-7a37d02 | git-22.264.46189-30ba277 |
| 21 | luci-theme-bootstrap | git-22.047.35373-cc582eb | git-22.288.45155-afd0012 |
| 22 | nano | 6.2-2 | 6.4-1 |
| 23 | px5g-wolfssl | 3 | 4.1 |
| 24 | rpcd | 2021-03-11-ccb75178-1 | 2022-02-19-8d26a1ba-1 |
| 25 | rpcd-mod-file | 2021-03-11-ccb75178-1 | 2022-02-19-8d26a1ba-1 |
| 26 | rpcd-mod-iwinfo | 2021-03-11-ccb75178-1 | 2022-02-19-8d26a1ba-1 |
| 27 | usbids | 0.354-1 | 0.359-1 |
| 28 | zlib | 1.2.11-4 | 1.2.11-6 |
+-----+----------------------------+--------------------------+--------------------------+
Proceed with upgrade? (Y/y to proceed) y
.... | Upgrading packages
Upgrading cgi-io on root from 2021-09-08-98cef9dd-20 to 2022-08-10-901b0f04-21...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/cgi-io_2022-08-10-901b0f04-21_x86_64.ipk
Upgrading curl on root from 7.82.0-2 to 7.83.1-4.1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/curl_7.83.1-4.1_x86_64.ipk
Upgrading firewall on root from 2021-03-23-61db17ed-1 to 2021-03-23-61db17ed-1.1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/firewall_2021-03-23-61db17ed-1.1_x86_64.ipk
Warning: Unable to locate ipset utility, disabling ipset support
Warning: Section @zone[1] (wan) cannot resolve device of network 'wan6'
* Flushing IPv4 filter table
* Flushing IPv4 nat table
* Flushing IPv4 mangle table
* Flushing IPv6 filter table
* Flushing IPv6 mangle table
* Flushing conntrack table ...
Upgrading htop on root from 3.1.2-1 to 3.2.1-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/htop_3.2.1-1_x86_64.ipk
Upgrading libcurl4 on root from 7.82.0-2 to 7.83.1-4.1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/libcurl4_7.83.1-4.1_x86_64.ipk
Installing libwolfssl5.5.1.99a5b54a (5.5.1-stable-2) to root...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/libwolfssl5.5.1.99a5b54a_5.5.1-stable-2_x86_64.ipk
libwolfssl5.2.0.99a5b54a was autoinstalled and is now orphaned, removing.
Removing package libwolfssl5.2.0.99a5b54a from root...
Removing obsolete file /usr/lib/libcurl.so.4.7.0.
Upgrading libevdev on root from 1.12.0-1 to 1.13.0-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/libevdev_1.13.0-1_x86_64.ipk
Upgrading libiwinfo-data on root from 2021-04-30-c45f0b58-2.1 to 2022-04-26-dc6847eb-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/libiwinfo-data_2022-04-26-dc6847eb-1_x86_64.ipk
Upgrading libiwinfo-lua on root from 2021-04-30-c45f0b58-2.1 to 2022-04-26-dc6847eb-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/libiwinfo-lua_2022-04-26-dc6847eb-1_x86_64.ipk
Upgrading libiwinfo20210430 on root from 2021-04-30-c45f0b58-2.1 to 2022-04-26-dc6847eb-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/libiwinfo20210430_2022-04-26-dc6847eb-1_x86_64.ipk
Upgrading libudev-zero on root from 1.0.0-1 to 1.0.1-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/libudev-zero_1.0.1-1_x86_64.ipk
Upgrading libustream-wolfssl20201210 on root from 2022-01-16-868fd881-1 to 2022-01-16-868fd881-2...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/libustream-wolfssl20201210_2022-01-16-868fd881-2_x86_64.ipk
Upgrading luci-app-ddns on root from git-21.349.33342-b5a40b3 to git-22.123.50005-9139ad4...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-app-ddns_git-22.123.50005-9139ad4_all.ipk
Upgrading luci-app-firewall on root from git-22.046.85957-59c3392 to git-22.089.67741-3856d50...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-app-firewall_git-22.089.67741-3856d50_all.ipk
Upgrading luci-app-opkg on root from git-21.312.69848-4745991 to git-22.273.29015-e01e38c...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-app-opkg_git-22.273.29015-e01e38c_all.ipk
Upgrading luci-app-statistics on root from git-22.072.58464-8cac3cb to git-22.115.68435-0473e99...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-app-statistics_git-22.115.68435-0473e99_all.ipk
Upgrading luci-base on root from git-22.046.85957-59c3392 to git-22.304.65299-04257f6...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-base_git-22.304.65299-04257f6_x86_64.ipk
Upgrading luci-lib-jsonc on root from git-19.317.29469-8da8f38 to git-22.097.61937-bc85ba5...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-lib-jsonc_git-22.097.61937-bc85ba5_x86_64.ipk
Upgrading luci-mod-network on root from git-22.046.85061-dd54dce to git-22.244.54918-77c916e...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-mod-network_git-22.244.54918-77c916e_all.ipk
Upgrading luci-mod-status on root from git-22.046.85784-0ac2542 to git-22.089.70019-d4f0b06...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-mod-status_git-22.089.70019-d4f0b06_x86_64.ipk
Upgrading luci-mod-system on root from git-22.019.40321-7a37d02 to git-22.264.46189-30ba277...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-mod-system_git-22.264.46189-30ba277_all.ipk
Upgrading luci-theme-bootstrap on root from git-22.047.35373-cc582eb to git-22.288.45155-afd0012...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/luci/luci-theme-bootstrap_git-22.288.45155-afd0012_all.ipk
Upgrading nano on root from 6.2-2 to 6.4-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/nano_6.4-1_x86_64.ipk
Upgrading px5g-wolfssl on root from 3 to 4.1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/px5g-wolfssl_4.1_x86_64.ipk
libwolfssl5.1.1.99a5b54a was autoinstalled and is now orphaned, removing.
Removing package libwolfssl5.1.1.99a5b54a from root...
Upgrading rpcd on root from 2021-03-11-ccb75178-1 to 2022-02-19-8d26a1ba-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/rpcd_2022-02-19-8d26a1ba-1_x86_64.ipk
Upgrading rpcd-mod-file on root from 2021-03-11-ccb75178-1 to 2022-02-19-8d26a1ba-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/rpcd-mod-file_2022-02-19-8d26a1ba-1_x86_64.ipk
Upgrading rpcd-mod-iwinfo on root from 2021-03-11-ccb75178-1 to 2022-02-19-8d26a1ba-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/rpcd-mod-iwinfo_2022-02-19-8d26a1ba-1_x86_64.ipk
Upgrading usbids on root from 0.354-1 to 0.359-1...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/packages/usbids_0.359-1_x86_64.ipk
Upgrading zlib on root from 1.2.11-4 to 1.2.11-6...
Downloading https://downloads.openwrt.org/releases/21.02.2/packages/x86_64/base/zlib_1.2.11-6_x86_64.ipk
Configuring rpcd.
Configuring luci-lib-jsonc.
Configuring rpcd-mod-file.
Configuring cgi-io.
Configuring luci-base.
Configuring zlib.
Configuring libiwinfo-data.
Configuring libiwinfo20210430.
Configuring luci-app-statistics.
Configuring libevdev.
Configuring luci-app-opkg.
Configuring nano.
Configuring libiwinfo-lua.
Configuring luci-mod-system.
Configuring libwolfssl5.5.1.99a5b54a.
Configuring libustream-wolfssl20201210.
Configuring luci-theme-bootstrap.
/luci-static/bootstrap
/luci-static/bootstrap-dark
/luci-static/bootstrap-light
Configuring libudev-zero.
Configuring usbids.
Configuring px5g-wolfssl.
Configuring luci-mod-status.
Configuring rpcd-mod-iwinfo.
Configuring luci-mod-network.
Configuring luci-app-ddns.
Configuring firewall.
Warning: Unable to locate ipset utility, disabling ipset support
Warning: Section @zone[1] (wan) cannot resolve device of network 'wan6'
* Populating IPv4 filter table
* Rule 'Allow-DHCP-Renew'
* Rule 'Allow-Ping'
* Rule 'Allow-IGMP'
* Rule 'Allow-IPSec-ESP'
* Rule 'Allow-ISAKMP'
* Forward 'lan' -> 'wan'
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 nat table
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 mangle table
* Zone 'lan'
* Zone 'wan'
* Populating IPv6 filter table
* Rule 'Allow-DHCPv6'
* Rule 'Allow-MLD'
* Rule 'Allow-ICMPv6-Input'
* Rule 'Allow-ICMPv6-Forward'
* Rule 'Allow-IPSec-ESP'
* Rule 'Allow-ISAKMP'
* Forward 'lan' -> 'wan'
* Zone 'lan'
* Zone 'wan'
* Populating IPv6 mangle table
* Zone 'lan'
* Zone 'wan'
* Flushing conntrack table ...
* Set tcp_ecn to off
* Set tcp_syncookies to on
* Set tcp_window_scaling to on
* Running script '/etc/firewall.user'
Configuring luci-app-firewall.
Configuring libcurl4.
Configuring curl.
Configuring htop.
Collected errors:
* resolve_conffiles: Existing conffile /etc/config/luci is different from the conffile in the new package. The new conffile will be placed at /etc/config/luci-opkg.
* resolve_conffiles: Existing conffile /etc/config/ucitrack is different from the conffile in the new package. The new conffile will be placed at /etc/config/ucitrack-opkg.
Done |
Upgrade finished
Please check for config file conflicts!
# ./opkg-upgrade.sh -f -n
Simple OPKG Updater v0.4.0
Done | Ignoring package lists update
Done | Getting upgradable packages list
No packages to install!
Clone it in current directory and use the -i option to install it to /usr/sbin/opkg-upgrade
# git clone git://github.com/tavinus/opkg-upgrade.git
# cd opkg-upgrade
# ./opkg-upgrade.sh -i
You may choose to ignore the certificates check using:
curl -kwget --no-check-certificate
Or you will need to fix your /etc/ssl/certs/ca-certificates.crt installation.
Please note that SSL support takes quite a lot of storage space.
This should be enough to make SSL work:
opkg install ca-certificates openssl-util
And this may be a workaround if you still have problems:
mkdir -p -m0755 /etc/ssl/certs && curl -k -o /etc/ssl/certs/ca-certificates.crt -L http://curl.haxx.se/ca/cacert.pem
Relevant links:
- https://wiki.openwrt.org/doc/howto/wget-ssl-certs
- https://forum.openwrt.org/viewtopic.php?pid=284368#p284368
- https://dev.openwrt.org/ticket/19621
# using wget with SSL
wget 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "/tmp/opkg-upgrade.sh" && chmod 755 "/tmp/opkg-upgrade.sh" && /tmp/opkg-upgrade.sh
# using wget WITHOUT SSL
wget --no-check-certificate 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "/tmp/opkg-upgrade.sh" && chmod 755 "/tmp/opkg-upgrade.sh" && /tmp/opkg-upgrade.sh
# using curl with SSL
curl -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "/tmp/opkg-upgrade.sh" && chmod 755 "/tmp/opkg-upgrade.sh" && /tmp/opkg-upgrade.sh
# using curl WITHOUT SSL
curl -k -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "/tmp/opkg-upgrade.sh" && chmod 755 "/tmp/opkg-upgrade.sh" && /tmp/opkg-upgrade.shRun with ./opkg-upgrade.sh after downloading
# using wget with SSL
wget 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "opkg-upgrade.sh" && chmod 755 "opkg-upgrade.sh"
# using wget WITHOUT SSL
wget --no-check-certificate 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "opkg-upgrade.sh" && chmod 755 "opkg-upgrade.sh"
# using curl with SSL
curl -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "opkg-upgrade.sh" && chmod 755 "opkg-upgrade.sh"
# using curl WITHOUT SSL
curl -k -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "opkg-upgrade.sh" && chmod 755 "opkg-upgrade.sh"Run with opkg-upgrade after downloading
# using wget with SSL
wget 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "/usr/sbin/opkg-upgrade" && chmod 755 "/usr/sbin/opkg-upgrade"
# using wget WITHOUT SSL
wget --no-check-certificate 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -O "/usr/sbin/opkg-upgrade" && chmod 755 "/usr/sbin/opkg-upgrade"
# using curl with SSL
curl -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "/usr/sbin/opkg-upgrade" && chmod 755 "/usr/sbin/opkg-upgrade"
# using curl WITHOUT SSL
curl -k -L 'https://raw.githubusercontent.com/tavinus/opkg-upgrade/master/opkg-upgrade.sh' -o "/usr/sbin/opkg-upgrade" && chmod 755 "/usr/sbin/opkg-upgrade"