Due to changes in the priorities, this project is currently not being supported. The project is archived as of 11/17/21 and will be available in a read-only state. Please note, since archival, the project is not maintained or reviewed.
e2d is a command-line tool for deploying and managing etcd clusters, both in the cloud or on bare-metal. It also includes e2db, an ORM-like abstraction for working with etcd.
e2d is designed to manage highly available etcd clusters in the cloud. It can be configured to interact directly with your cloud provider to seed the cluster membership and backup/restore etcd data.
-
Cluster management
Membership and node liveness are determined with the help of a gossip network (memberlist). This enables the automation of many administrative tasks, such as adding/removing members to the cluster in the event of failure. This is also how e2d is able to bootstrap new clusters in automated deployments.
-
Disaster recovery
Periodic snapshots can be made and saved directly to different types of storage. This allows e2d to automatically restore the cluster, even from total cluster failure.
-
Minimal configuration
Much of the etcd configuration is handled, simplifying the configuration of e2d. e2d automatically differentiates between runtime configurations, such as an existing node restarting, removing dead nodes to attempt rejoining the cluster, establishing a new cluster, restoring a cluster from snapshot, etc.
-
Peer discovery
In dynamic cloud environments, etcd membership is seeded from cloud provider APIs and maintained via a gossip network. This ensures etcd stays healthy and available when nodes might be automatically created or destroyed.
A key design philosophy of e2d is ease-of-use, so having minimal and/or automatic configuration is an important part of the user experience. Since e2d uses a gossip network for peer discovery, cloud metadata services can be leveraged to dynamically create the initial etcd bootstrap configuration. The gossip network is also used for determining node liveness, ensuring that healthy members can safely (and automatically) remove and replace a failing minority of members. An automatic snapshot feature creates periodic backups, which can be restored in the case of a majority failure of etcd members. This is all handled for the user by simply setting a shared file location for the snapshot, and e2d handles the rest. This ends up being incredibly helpful for those using Kubernetes in their dev environments, where cost-savings policies might stop instances over nights/weekends.
While e2d makes use of cloud provider specific features, it never depends on them. The abstraction for peer discovery and snapshot storage are generalized so they can be ported to many different platforms trivially. Another neat aspect of e2d is that it embeds etcd directly into its own binary, effectively using it like a library. This is what enables some of the more complex automation, and with only one binary it reduces the complexity of deploying into production.
Running a single-node cluster:
$ e2d runMulti-node clusters require that the --required-cluster-size/-n flag be set with the desired size of the cluster. Each node must also either provide a seed of peers (via the --bootstrap-addrs flag):
$ e2d run -n 3 --bootstrap-addrs 10.0.2.15,10.0.2.17or specify a method for peer discovery:
$ e2d run -n 3 --peer-discovery aws-autoscaling-groupThe same ports required by etcd are necessary, along with a couple new ones:
| Port | Description |
|---|---|
| TCP/2379 | Required by etcd. Used for incoming client connections. This port should allow ingress from any system that will need to connect to etcd as a client. |
| TCP/2380 | Required by etcd. Used by etcd members for internal etcd cluster communication. This port should be allowed only for systems that will be running e2d. |
| UDP/7980 | Required by memberlist. Used for node-liveness checks and sharing membership data. |
| TCP/7980 | Required by memberlist. Used for node-liveness checks and sharing membership data. |
Note: Hashicorp's memberlist requires both TCP and UDP for port 7980 to allow memberlist to fully communicate.
Peers can be automatically discovered based upon several different built-in methods:
| Method | Usage |
|---|---|
| AWS Autoscaling Group | aws-autoscaling-group |
| AWS EC2 tags | ec2-tags[:<name>=<value>,<name>=<value>] |
| Digital Ocean tags | do-tags[:<value>,<value>] |
For example, running a 3-node cluster in AWS where initial peers are found via ec2 tags:
$ e2d run -n 3 --peer-discovery ec2-tags:Name=my-cluster,[email protected]which will match for any EC2 instance that has both of the provided tags.
Periodic backups can be made of the entire database, and e2d automates both creating these snapshot backups, as well as, restoring them in the event of a disaster.
Getting started with periodic snapshots only requires passing a file location to --snapshot-backup-url. The url is then parsed to determine the target storage and location. When e2d first starts up, the presence of a valid backup file at the provided URL indicates it should attempt to restore from this snapshot.
The internal database layout of etcd lends itself to being compressed. This is why e2d allows for snapshots to be compressed in-memory at the time of creation. To enable gzip compression, use the --snapshot-compression flag.
Snapshot storage options like S3 use TLS and offer encryption-at-rest, however, it is possible that encryption of the snapshot file itself might be needed. This is especially true for other storage options that do not offer these features. Enabling snapshot encryption is simply --snapshot-encryption. The encryption key itself is derived only from the CA private key, so enabling encryption also requires passing --ca-key <key path>.
The encryption being used is AES-256 in CTR mode, with message authentication provided by HMAC-512_256. This mode was used because the Go implementation of AES-GCM would require the entire snapshot to be in-memory, and CTR mode allows for memory efficient streaming.
It is possible to use compression alongside of encryption, however, it is important to note that because of the possibility of opening up side-channel attacks, compression is not performed before encryption. The nature of how strong encryption works causes the encrypted snapshot to not gain benefits from compression. So enabling snapshot compression with encryption will cause the gzip level to be set to gzip.NoCompression, meaning it still creates a valid gzip file, but doesn't waste nearly as many compute resources while doing so.
The --snapshot-backup-url has several schemes it implicitly understands:
| Storage Type | Usage |
|---|---|
| File | file://<path> |
| AWS S3 | s3://<bucket>[/path] |
| Digital Ocean Spaces | https://<region>.digitaloceanspaces.com/<bucket>[/path] |
e2d should be managed by your service manager. The following templates should get you started. Note: these examples assume e2d is being deployed in AWS.
Mutual TLS authentication is highly recommended and e2d embeds the necessary functionality to generate the required key pairs. To get started with a new e2d cluster, first initialize a new key/cert pair:
$ e2d pki initThen create the remaining certificates for the client, peer, and server communication:
$ e2d pki gencertsThis will create the remaining key pairs needed to run e2d based on the initial cluster key pair.
An example unit file for running via systemd in an AWS ASG:
[Unit]
Description=e2d
[Service]
ExecStart=/usr/local/bin/e2d run \
--data-dir=/var/lib/etcd \
--ca-cert=/etc/kubernetes/pki/etcd/ca.crt \
--ca-key=/etc/kubernetes/pki/etcd/ca.crt \
--client-cert=/etc/kubernetes/pki/etcd/client.crt \
--client-key=/etc/kubernetes/pki/etcd/client.key \
--peer-cert=/etc/kubernetes/pki/etcd/peer.crt \
--peer-key=/etc/kubernetes/pki/etcd/peer.key \
--server-cert=/etc/kubernetes/pki/etcd/server.crt \
--server-key=/etc/kubernetes/pki/etcd/server.key \
--peer-discovery=aws-autoscaling-group \
--required-cluster-size=3 \
--snapshot-backup-url=s3://e2d_snapshot_bucket
Restart=on-failure
RestartSec=30
[Install]
WantedBy=multi-user.target
e2d currently doesn't have the integration necessary to run correctly within Kubernetes, however, it should be relatively easy to add the necessary discovery features to make that work and is planned for future releases of e2d.
The short answer is No, because it is unsafe to scale etcd and any solution that scales etcd is increasing the chance of cluster failure. This is a feature that will be supported in the future, but it relies on new features and fixes to etcd. Some context will be necessary to explain why:
A common misconception about etcd is that it is scalable. While etcd is a distributed key/value store, the reason it is distributed is to provide for distributed consensus, NOT to scale in/out for performance (or flexibility). In fact, the best performing etcd cluster is when it only has 1 member and the performance goes down as more members are added. In etcd v3.4, a new type of member called learners was introduced. These are members that can receive raft log updates, but are not part of the quorum voting process. This will be an important feature for many reasons, like stability/safety and faster recovery from faults, but will also potentially[1] enable etcd clusters of arbitrary sizes.
So why not scale within the recommended cluster sizes if the only concern is performance? Previously, etcd clusters have been vulnerable to corruption during membership changes due to the way etcd implemented raft. This has only recently been addressed by incredible work from CockroachDB, and it is worth reading about the issue and the solution in this blog post: Availability and Region Failure: Joint Consensus in CockroachDB.
The last couple features needed to safely scale have been roadmapped for v3.5 and are highlighted in the etcd learner design doc:
Make learner state only and default: Defaulting a new member state to learner will greatly improve membership reconfiguration safety, because learner does not change the size of quorum. Misconfiguration will always be reversible without losing the quorum.
Make voting-member promotion fully automatic: Once a learner catches up to leader’s logs, a cluster can automatically promote the learner. etcd requires certain thresholds to be defined by the user, and once the requirements are satisfied, learner promotes itself to a voting member. From a user’s perspective, “member add” command would work the same way as today but with greater safety provided by learner feature.
Since we want to implement this feature as safely and reliably as possible, we are waiting for this confluence of features to become stable before finally implementing scaling into e2d.
[1] Only potentially, because the maximum is currently set to allow only 1 learner. There is a concern that too many learners could have a negative impact on the leader which is discussed briefly here. It is also worth noting that other features may also fulfill the same need like some kind of follower replication: etcd#11357.