Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin…

… into bugfix-2.0.x
crysxd · Feb 27, 2020 · a430d32 · a430d32
2 parents 077ad7c + a80eda4
commit a430d32
Show file tree

Hide file tree

Showing 128 changed files with 1,049 additions and 835 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -764,6 +764,8 @@
   #define DEFAULT_YJERK 10.0
   #define DEFAULT_ZJERK  0.3
 
+  //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
+
   //#define LIMITED_JERK_EDITING        // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
   #if ENABLED(LIMITED_JERK_EDITING)
     #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1090,18 +1090,16 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
-  #if HAS_SDCARD_CONNECTION
-    /**
-     * Set this option to one of the following (or the board's defaults apply):
-     *
-     *           LCD - Use the SD drive in the external LCD controller.
-     *       ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
-     *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
-     *
-     * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
-     */
-    //#define SDCARD_CONNECTION LCD
-  #endif
+  /**
+   * Set this option to one of the following (or the board's defaults apply):
+   *
+   *           LCD - Use the SD drive in the external LCD controller.
+   *       ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+   *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+   *
+   * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+   */
+  //#define SDCARD_CONNECTION LCD
 
 #endif // SDSUPPORT
 
@@ -2508,6 +2506,8 @@
   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
 
+//#define GCODE_CASE_INSENSITIVE  // Accept G-code sent to the firmware in lowercase
+
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.

diff --git a/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
@@ -39,7 +39,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }

diff --git a/Marlin/src/HAL/HAL_AVR/watchdog.cpp b/Marlin/src/HAL/HAL_AVR/watchdog.cpp
@@ -62,7 +62,7 @@ void watchdog_init() {
 #if ENABLED(WATCHDOG_RESET_MANUAL)
   ISR(WDT_vect) {
     sei();  // With the interrupt driven serial we need to allow interrupts.
-    SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
+    SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
     minkill();  // interrupt-safe final kill and infinite loop
   }
 #endif

diff --git a/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp
@@ -54,7 +54,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
       eeprom_write_byte(p, v);
       delay(2);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }

diff --git a/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.cpp b/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.cpp
@@ -32,21 +32,21 @@
   }
 #endif
 
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 1) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 1) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 1)
+#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
   MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
   extern "C" void UART1_IRQHandler() {
     MSerial1.IRQHandler();
   }
 #endif
 
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 2) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 2) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 2)
+#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
   MarlinSerial MSerial2(LPC_UART2);
   extern "C" void UART2_IRQHandler() {
     MSerial2.IRQHandler();
   }
 #endif
 
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 3) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 3) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 3)
+#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
   MarlinSerial MSerial3(LPC_UART3);
   extern "C" void UART3_IRQHandler() {
     MSerial3.IRQHandler();

diff --git a/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h
@@ -76,3 +76,52 @@
 #if ENABLED(BAUD_RATE_GCODE)
   #error "BAUD_RATE_GCODE is not yet supported on LPC176x."
 #endif
+
+/**
+ * Flag any serial port conflicts
+ *
+ *   Port  |  TX   |  RX   |
+ *    ---  |  ---  |  ---  |
+ * Serial  | P0_02 | P0_03 |
+ * Serial1 | P0_15 | P0_16 |
+ * Serial2 | P0_10 | P0_11 |
+ * Serial3 | P0_00 | P0_01 |
+ */
+#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
+  #if  X_CS_PIN == P0_02 || TMC_SW_MISO == P0_02 || (E_STEPPERS && E_MUX1_PIN == P0_02) \
+    || Y_CS_PIN == P0_03 || TMC_SW_MOSI == P0_03 || (E_STEPPERS && E_MUX0_PIN == P0_03)
+    #error "Serial port assignment (0) conflicts with other pins!"
+  #endif
+#endif
+
+#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
+  #if TMC_SW_SCK == P0_15
+    #error "Serial port assignment (1) conflicts with other pins!"
+  #elif HAS_SPI_LCD
+    #if  BTN_EN2 == P0_15 || SCK_PIN == P0_15 || LCD_PINS_D4 == P0_15 || DOGLCD_SCK == P0_15 || LCD_RESET_PIN == P0_15 || LCD_PINS_RS == P0_15 || SHIFT_CLK == P0_15 \
+      || BTN_EN1 == P0_16 || LCD_SDSS == P0_16 || LCD_PINS_RS == P0_16 || MISO_PIN == P0_16 || DOGLCD_A0 == P0_16 || SS_PIN == P0_16 || LCD_SDSS == P0_16 || DOGLCD_CS == P0_16 || LCD_RESET_PIN == P0_16 || LCD_BACKLIGHT_PIN == P0_16
+      #error "Serial port assignment (1) conflicts with other pins!"
+    #endif
+  #endif
+#endif
+
+#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
+  #if  Y_MIN_PIN == P0_10 || Z_MIN_PROBE_PIN == P0_10 \
+    || X_ENABLE_PIN == P0_10 || Y_ENABLE_PIN == P0_10 || X2_ENABLE_PIN == P0_10 || Y2_ENABLE_PIN == P0_10 || Z2_ENABLE_PIN == P0_10 || Z3_ENABLE_PIN == P0_10 || Z4_ENABLE_PIN == P0_10 \
+    || X2_CS_PIN == P0_10 || Y2_CS_PIN == P0_10 || Z2_CS_PIN == P0_10 || Z3_CS_PIN == P0_10 || Z4_CS_PIN == P0_10 \
+    || X_DIR_PIN == P0_11 || Y_DIR_PIN == P0_11 || X2_DIR_PIN == P0_11 || Y2_DIR_PIN == P0_11 || Z2_DIR_PIN == P0_11 || Z3_DIR_PIN == P0_11 || Z4_DIR_PIN == P0_11 \
+    || X2_STEP_PIN == P0_11 || Y2_STEP_PIN == P0_11 || Z2_STEP_PIN == P0_11 || Z3_STEP_PIN == P0_11 || Z4_STEP_PIN == P0_11
+    #error "Serial port assignment (2) conflicts with other pins!"
+  #elif  (E_STEPPERS > 1 && (E1_ENABLE_PIN == P0_10 || E1_CS_PIN == P0_10)) || (E_STEPPERS > 0 && (E0_DIR_PIN == P0_11 || E0_STEP_PIN == P0_11))
+    #error "Serial port assignment (2) conflicts with other pins!"
+  #endif
+#endif
+
+#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
+  #if  X_MIN_PIN == P0_00 || Y_SERIAL_TX_PIN == P0_00 || Y_SERIAL_RX_PIN == P0_00 \
+    || X_MAX_PIN == P0_01 || X_SERIAL_TX_PIN == P0_01 || X_SERIAL_RX_PIN == P0_01
+    #error "Serial port assignment (2) conflicts with other pins!"
+  #elif E_STEPPERS > 1 && (E1_DIR_PIN == P0_00 || E1_STEP_PIN == P0_01)
+    #error "Serial port assignment (2) conflicts with other pins!"
+  #endif
+#endif
diff --git a/Marlin/src/HAL/HAL_SAMD51/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_SAMD51/persistent_store_eeprom.cpp
@@ -72,7 +72,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
         eeprom_write_byte(p, v);
         delay(2);
         if (eeprom_read_byte(p) != v) {
-          SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+          SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
           return true;
         }
       }

diff --git a/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp
@@ -48,7 +48,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
       if (v != eeprom_read_byte(p)) {
         eeprom_write_byte(p, v);
         if (eeprom_read_byte(p) != v) {
-          SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+          SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
           return true;
         }
       }

diff --git a/Marlin/src/HAL/HAL_STM32F1/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_STM32F1/persistent_store_eeprom.cpp
@@ -49,7 +49,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }

diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/persistent_store_eeprom.cpp
@@ -41,7 +41,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }

diff --git a/Marlin/src/HAL/HAL_TEENSY31_32/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_TEENSY31_32/persistent_store_impl.cpp
@@ -36,7 +36,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }

diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_eeprom.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_eeprom.cpp
@@ -42,7 +42,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
       }
     }