Skip to content

devinpitcher/homebridge-unifi-protect2

 
 

Repository files navigation

homebridge-verified

Homebridge UniFi Protect

UniFi Protect plugin for Homebridge.

Homebridge UniFi Protect2

Unifi Protect plarform plugin for Homebridge

This plugin is intended to automatically configure all the cameras you have setup in UniFi Protect to make them available via HomeKit. It supports UniFi CloudKey Gen2+ and UniFi Dream Machine Pro and should support any device that can run UniFi Protect.

This package is based on the excellent work of homebridge-camera-ffmpeg and homebridge-camera-unifi.

Why use this homebridge plugin?

This plugin aims to be a one-stop-shop for UniFi Protect to HomeKit connectivity. Over time, it is my hope to add motion sensors and any other capabilities that make sense to this plugin to enable HomeKit users to easily connect the UniFi Protect and HomeKit worlds.

What's not in this plugin right now

Support for motion detection and motion events. I would love to add this functionality but most of the approaches to implementing this right now involve hacks like monitoring the logs in realtime on Protect and trying to parse what it's telling us on the motion front. Additionally, the active development and evolution of motion detection on Protect right now (circa mid 2020) makes this a moving target. TL;DR: it's on the radar, but I'm waiting until there are better options to implementing this in a reasonable way.

What's new?

  • UniFi Dream Machine Pro and UniFi NVR support (UnifiOS support).
  • Audio support (listen-only - no microphone support).

Installation

If you are new to Homebridge, please first read the Homebridge documentation.

Install homebridge if you haven't already done so:

sudo npm install -g --unsafe-perm homebridge

Install homebridge-unifi-protect2:

sudo npm install -g --unsafe-perm homebridge-unifi-protect2

You will need a working ffmpeg installation for this plugin to work. Configuring ffmpeg is beyond the scope of this manual. Please refer to the excellent documentation for homebridge-camera-ffmpeg.

Audio support notes

Audio on cameras is tricky in the HomeKit world to begin with, and when you throw in some of the specifics of how UniFi Protect works, it gets even more interesting. Some things to keep in mind if you want to use audio with UniFi Protect:

  • This plugin supports audio coming from UniFi cameras. It does not support two-way audio.

  • You will need to enable the audio configuration option and you may need to adjust the packetSize option if you're getting choppy audio or video as a result.

  • Audio support will not work unless you have a version of ffmpeg that supports fdk-aac. Unfortunately, most default installations of ffmpeg are not compiled with support for fdk-aac. You'll need to compile or acquire a version of ffmpeg that does. Doing so is beyond the scope of this plugin. There are plenty of guides to this - Google is your friend. This plugin uses ffmpeg-for-homebridge which easies pain somewhat by providing prebuilt static binaries of ffmpeg for certain platforms, and save you the trouble of having to compile a version of ffmpeg yourself.

Using another video processor

videoProcessor is the video processor used to stream video. By default, this is ffmpeg, but can be your own custom version of ffmpeg or other video processor that accepts and understands ffmpeg command line arguments.

{
  "platform": "Camera-UniFi-Protect",
  "videoProcessor": "ffmpeg",
  "controllers": [
    ...
  ]
}
{
  "platform": "Camera-UniFi-Protect",
  "videoProcessor": "/my/own/compiled/ffmpeg",
  "controllers": [
    ...
  ]
}

Adding your cameras using the Home app

After restarting Homebridge, each UniFi camera will need to be manually paired in the Home app.

To do this:

  1. Open the Home app on your device.
  2. Tap the Home tab, then tap .
  3. Tap Add Accessory, and select I Don't Have a Code or Cannot Scan.
  4. Select the Camera you want to pair.
  5. Enter the Homebridge PIN, this can be found under the QR code in Homebridge UI or your Homebridge logs, alternatively you can select Use Camera and scan the QR code again.

Plugin configuration

Add the platform in config.json in your home directory inside .homebridge.

For UniFi CloudKey Gen2+ devices, you need to specify the port in the URL to access Protect.

Sample configuration block for UCK Gen2+ devices:

"platforms": [
  {
    "platform": "Camera-UniFi-Protect",
    "name": "UniFi Protect",

    "controllers": [
      {
        "url": "https://my-cloud-key:7443",
        "username": "some-unifi-protect-user (or create a new one just for homebridge)",
        "password": "some-password"
      }
    ]
  }
]

For UnifiOS devices like UDM-Pro, UniFi NVR, do not specify the port. You can use your Ubiquiti account credentials, though 2FA is not currently supported. I strongly recommend creating a local user just for Homebridge instead of using this option.

Here's a sample configuration block for UnifiOS devices:

"platforms": [
  {
    "platform": "Camera-UniFi-Protect",
    "name": "UniFi Protect",

    "controllers": [
      {
        "url": "https://my-udm-pro",
        "username": "some-unifi-protect-user (or create a new one just for homebridge)",
        "password": "some-password"
      }
    ]
  }
]

Advanced configuration (optional)

This step is not required. For those that prefer to tailor the defaults to their liking, here are the supported parameters.

"platforms": [
  {
    "platform": "Camera-UniFi-Protect",
    "name": "UniFi Protect",
    "videoProcessor" : "/usr/local/bin/ffmpeg",
    "debug" : no,

    "controllers": [
      {
        "url": "https://my-cloud-key:7443",
        "username": "some-homebridge-user (or create a new one just for homebridge)",
        "password": "some-password"
      }
    ],

    "videoConfig": {
        "sourcePrefix": "-re -rtsp_transport tcp",
        "additionalCommandline": "-preset slow -profile:v high -level 4.2 -x264-params intra-refresh=1:bframes=0",
        "mapaudio": "0:0",
        "mapvideo": "0:1",
        "maxStreams": 4,
        "maxWidth": 1920,
        "maxHeight": 1080,
        "maxFPS": 20,
        "packetSize" : 376,
        "audio": no
    } 
  }
]
Fields Description Default Required
platform Must always be Camera-UniFi-Protect. Yes
name For logging purposes. No
videoProcessor Specify path of ffmpeg or avconv. "ffmpeg" No
debug Enable additional debug logging. no No
url URL for UniFi CloudKey G2+ Yes
username Your UniFi Protect username. Yes
password Your UniFi Protect password. Yes
sourcePrefix Prefix to apply to ffmpeg source command. "-re -rtsp_transport tcp" No
additionalCommandline Additional parameters to pass ffmpeg to render video. "-preset slow -profile:v high -level 4.2 -x264-params intra-refresh=1:bframes=0" No
mapaudio Mapping of audio channels for ffmpeg. "0:0" No
mapvideo Mapping of video channels for ffmpeg. "0:1" No
maxStreams Maximum number of streams allowed for a camera. 4 No
maxWidth Maximum width of a video stream allowed. 1920 No
maxHeight Maximum height of a video stream allowed. 1080 No
maxFPS Maximum framerate for a video stream. 20 No
packetSize Packet size for the camera stream in multiples of 188. 376 No
audio Enable audio support for UniFi Protect. no No

About

📹 UniFi Protect Plugin for Homebridge: https://github.com/nfarina/homebridge

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • JavaScript 100.0%