chore(deps): bump astro from 3.1.2 to 3.6.1

[dependabot]

Bumps astro from 3.1.2 to 3.6.1.

Release notes

Sourced from astro's releases.

[email protected]

Patch Changes

• #9173 04fdc1c61 Thanks @​lilnasy! - Fixes an issue where having a middleware prevented the SSR app from being deployed on Netlify.

• #9186 607542c7c Thanks @​martrapp! - Fixes a view transition issue on webKit browsers that prevented scrolling to #fragments

[email protected]

Minor Changes

• #9090 c87223c21 Thanks @​martrapp! - Take full control over the behavior of view transitions!

  Three new events now complement the existing astro:after-swap and astro:page-load events:

  astro: before - preparation; // Control how the DOM and other resources of the target page are loaded
  astro: after - preparation; // Last changes before taking off? Remove that loading indicator? Here you go!
  astro: before - swap; // Control how the DOM is updated to match the new page

  The astro:before-* events allow you to change properties and strategies of the view transition implementation. The astro:after-* events are notifications that a phase is complete. Head over to docs to see the full view transitions lifecycle including these new events!

• #9092 0ea4bd47e Thanks @​smitbarmase! - Changes the fallback prefetch behavior on slow connections and when data saver mode is enabled. Instead of disabling prefetch entirely, the tap strategy will be used.

• #9166 cba6cf32d Thanks @​matthewp! - The Picture component is no longer experimental

  The <Picture /> component, part of astro:assets, has exited experimental status and is now recommended for use. There are no code changes to the component, and no upgrade to your project is necessary.

  This is only a change in documentation/recommendation. If you were waiting to use the <Picture /> component until it had exited the experimental stage, wait no more!

• #9092 0ea4bd47e Thanks @​smitbarmase! - Adds a ignoreSlowConnection option to the prefetch() API to prefetch even on data saver mode or slow connection.

[email protected]

Patch Changes

• #9157 7ff8d62bf Thanks @​ematipico! - Revert fix around fallback system, which broken injected styles

[email protected]

Patch Changes

• #9121 f4efd1c80 Thanks @​peng! - Adds a warning if astro add fetches a package but returns a non-404 status

• #9142 7d55cf68d Thanks @​ematipico! - Consistely emit fallback routes in the correct folders.

• #9119 306781795 Thanks @​ematipico! - Fix a flaw in the i18n fallback logic, where the routes didn't preserve their metadata, such as hoisted scripts

• #9140 7742fd7dc Thanks @​martrapp! - View Transitions: handle clicks on SVGAElements and image maps"

... (truncated)

Changelog

Sourced from astro's changelog.

3.6.1

Patch Changes

• #9173 04fdc1c61 Thanks @​lilnasy! - Fixes an issue where having a middleware prevented the SSR app from being deployed on Netlify.

• #9186 607542c7c Thanks @​martrapp! - Fixes a view transition issue on webKit browsers that prevented scrolling to #fragments

3.6.0

Minor Changes

• #9090 c87223c21 Thanks @​martrapp! - Take full control over the behavior of view transitions!

  Three new events now complement the existing astro:after-swap and astro:page-load events:

  'astro:before-preparation'; // Control how the DOM and other resources of the target page are loaded
  'astro:after-preparation'; // Last changes before taking off? Remove that loading indicator? Here you go!
  'astro:before-swap'; // Control how the DOM is updated to match the new page

  The astro:before-* events allow you to change properties and strategies of the view transition implementation. The astro:after-* events are notifications that a phase is complete. Head over to docs to see the full view transitions lifecycle including these new events!

• #9092 0ea4bd47e Thanks @​smitbarmase! - Changes the fallback prefetch behavior on slow connections and when data saver mode is enabled. Instead of disabling prefetch entirely, the tap strategy will be used.

• #9166 cba6cf32d Thanks @​matthewp! - The Picture component is no longer experimental

  The <Picture /> component, part of astro:assets, has exited experimental status and is now recommended for use. There are no code changes to the component, and no upgrade to your project is necessary.

  This is only a change in documentation/recommendation. If you were waiting to use the <Picture /> component until it had exited the experimental stage, wait no more!

• #9092 0ea4bd47e Thanks @​smitbarmase! - Adds a ignoreSlowConnection option to the prefetch() API to prefetch even on data saver mode or slow connection.

3.5.7

Patch Changes

• #9157 7ff8d62bf Thanks @​ematipico! - Revert fix around fallback system, which broken injected styles

3.5.6

Patch Changes

• #9121 f4efd1c80 Thanks @​peng! - Adds a warning if astro add fetches a package but returns a non-404 status

• #9142 7d55cf68d Thanks @​ematipico! - Consistely emit fallback routes in the correct folders.

... (truncated)

Commits

• 2ef75fe [ci] release (#9180)
• 607542c fix scroll restoration issue on webKit browsers (#9186)
• 04fdc1c fix(middleware): rename internal middleware id (#9173)
• 481c13a fix: Changelog formatting for 3.6.0 View Transition events (#9176)
• ae4d949 [ci] format
• 7c485ff Fix View Transitions code block formatting (#9174)
• 4d1274c [ci] release (#9165)
• 0ea4bd4 Fallback to tap prefetch strategy on slow connection (#9092)
• 0970fd6 [ci] format
• c87223c New events for Astro's view transition API (#9090)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Superseded by #292.