-
Escorna CPU is 50x50mm to 50x100mm board to use with Arduino Nano. It integrates keypad on board on 2x
-
Escorna_CPU_2_4 It is a pcb that integrates an ATmega328P, a step-up (to use 1.2V batteries) and the rest of the electronics needed to build an Escornabot.
-
Arduino Shield is an Arduino Uno compatible shield ready to use with the Escornabot's motors and also integrates a keypad.
-
Cervus is a board based on powerful ATmega32u4 microcontroler and compatible with Arduino shields.
-
E_Keypad Is a 50x50mm board with 6 and 5 buttons and connects to any Escornabot.
-
E_KEY_BT Escornabot keyboard with MakeyMakey type sensors on the E_KEY_BT board. Any object that is minimally conductive can be used. Adjusting the value threshold: higher for less sensitivity, nothing needs to be changed in the robot firmware.
-
[E_KEY_FICHA][E_KEY_FICHA] It allows the programming of Escornabot using printed or cut-out cards (cardboard ..) communicating the commands via Bluetooth. using @arduino Nano, easy to print, manageable and expandable to 15 "Tabs" thanks to the firmware of @caligari_pub
-
escoRnaFIDPCB for the project for children with visual impairment or blindness, developed by Angel Villanueva @avilmaru to control an Escornabot with RFID cards
Every content in this repo, otherwise specified under subdirectories, is licensed under Creative Commons BY-SA or CERN Open Hardware Licence -W- V2. (by XDeSIG)
Developer don't produce boards to sell. Under provider directory there are instructions to order yourself.
Are you a board provider? Please, send us your buyer's guide! :-)