Add files via upload (IDFGH-13958)

components/esp-idf-bmx280/CMakeLists.txt

@@ -0,0 +1,6 @@
+
+idf_component_register(
+    SRCS bmx280.c
+    INCLUDE_DIRS "include"
+    REQUIRES driver
+)

components/esp-idf-bmx280/Kconfig

@@ -0,0 +1,137 @@
+menu "BMX280 Options"
+    choice BMX280_EXPECT_DEVICE
+        prompt "Installed Sensor Model"
+        help
+            Set to the model of the sensor you are using (if you know it).
+        default BMX280_EXPECT_DETECT
+        config BMX280_EXPECT_DETECT
+            bool "Auto"
+        config BMX280_EXPECT_BME280
+            bool "BME280"
+        config BMX280_EXPECT_BMP280
+            bool "BMP280"
+    endchoice
+
+    choice BMX280_ADDRESS
+        prompt "I2C Slave Address"
+        help
+            Set the slave address of the sensor if you know it. The driver can
+            automatically detect it if you don't know.
+        default BMX280_ADDRESS_DETECT
+        config BMX280_ADDRESS_DETECT
+            bool "Auto"
+        config BMX280_ADDERSS_LO
+            bool "0x76 (SDO LOW)"
+        config BMX280_ADDERSS_HI
+            bool "0x77 (SDO HIGH)"
+    endchoice
+
+    config BMX280_TIMEOUT
+        int "Read/Write Timeout"
+        default 5
+        help
+            Number of ticks to wait for I2C read/write operations.
+
+    menu "Default Configuration"
+        choice BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING
+            prompt "Temperature Oversampling"
+            default BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X2
+            help
+                Refer to BMP280/BME280 Datasheet for more information.
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_NONE
+                bool "None"
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X1
+                bool "x1"
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X2
+                bool "x2"
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X4
+                bool "x4"
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X8
+                bool "x8"
+            config BMX280_DEFAULT_TEMPERATURE_OVERSAMPLING_X16
+                bool "x16"
+        endchoice
+
+        choice BMX280_DEFAULT_PRESSURE_OVERSAMPLING
+            prompt "Pressure Oversampling"
+            default BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X16
+            help
+                Refer to BMP280/BME280 Datasheet for more information.
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_NONE
+                bool "None"
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X1
+                bool "x1"
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X2
+                bool "x2"
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X4
+                bool "x4"
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X8
+                bool "x8"
+            config BMX280_DEFAULT_PRESSURE_OVERSAMPLING_X16
+                bool "x16"
+        endchoice
+
+        choice BMX280_DEFAULT_STANDBY
+            prompt "Cyclic Measurement Standby Time"
+            default BMX280_DEFAULT_STANDBY_0M5
+            help
+                Refer to BMP280/BME280 Datasheet for more information.
+            config BMX280_DEFAULT_STANDBY_0M5
+                bool "0.5ms"
+            config BMX280_DEFAULT_STANDBY_62M5
+                bool "62.5ms"
+            config BMX280_DEFAULT_STANDBY_125M
+                bool "125ms"
+            config BMX280_DEFAULT_STANDBY_250M
+                bool "250ms"
+            config BMX280_DEFAULT_STANDBY_500M
+                bool "500ms"
+            config BMX280_DEFAULT_STANDBY_1000M
+                bool "1000ms"
+            config BMX280_DEFAULT_STANDBY_10M
+                bool "BMP280: 2000ms // BME280: 10ms"
+            config BMX280_DEFAULT_STANDBY_20M
+                bool "BMP280: 4000ms // BME280: 20ms"
+        endchoice
+
+        choice BMX280_DEFAULT_IIR
+            prompt "IIR Filter Sensitivity"
+            default BMX280_DEFAULT_IIR_X16
+            help
+                Refer to BMP280/BME280 Datasheet for more information.
+            config BMX280_DEFAULT_IIR_NONE
+                bool "Filter Off"
+            config BMX280_DEFAULT_IIR_X2
+                bool "x2"
+            config BMX280_DEFAULT_IIR_X4
+                bool "x4"
+            config BMX280_DEFAULT_IIR_X8
+                bool "x8"
+            config BMX280_DEFAULT_IIR_X16
+                bool "x16"
+        endchoice
+
+        menu "BME280 Specific Options"
+            depends on !(BMX280_EXPECT_BMP280)
+
+            choice BMX280_DEFAULT_HUMIDITY_OVERSAMPLING
+                prompt "Humidity Oversampling"
+                default BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X1
+                help
+                    Refer to BME280 Datasheet for more information.
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_NONE
+                    bool "None"
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X1
+                    bool "x1"
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X2
+                    bool "x2"
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X4
+                    bool "x4"
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X8
+                    bool "x8"
+                config BMX280_DEFAULT_HUMIDITY_OVERSAMPLING_X16
+                    bool "x16"
+            endchoice
+        endmenu
+    endmenu
+endmenu

components/esp-idf-bmx280/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2020 Halit Utku Maden
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

components/esp-idf-bmx280/README.md

@@ -0,0 +1,73 @@
+BMX280 for ESP-IDF
+==================
+BMX280 is a basic I2C based driver for ESP32 devices licensed mostly under MIT.
+(See caption "License" for details.)
+
+Usage
+-----
+Clone this repository or add it as a submodule into your components directory.
+Add the module as a requirement to your main module, or other modules.
+
+Example Code
+------------
+```c
+#include "esp_log.h"
+#include "bmx280.h"
+
+void app_main(void)
+{
+    // Entry Point
+    //ESP_ERROR_CHECK(nvs_flash_init());
+    i2c_config_t i2c_cfg = {
+        .mode = I2C_MODE_MASTER,
+        .sda_io_num = GPIO_NUM_17,
+        .scl_io_num = GPIO_NUM_16,
+        .sda_pullup_en = false,
+        .scl_pullup_en = false,
+
+        .master = {
+            .clk_speed = 100000
+        }
+    };
+
+    ESP_ERROR_CHECK(i2c_param_config(I2C_NUM_0, &i2c_cfg));
+    ESP_ERROR_CHECK(i2c_driver_install(I2C_NUM_0, I2C_MODE_MASTER, 0, 0, 0));
+
+    bmx280_t* bmx280 = bmx280_create(I2C_NUM_0);
+
+    if (!bmx280) { 
+        ESP_LOGE("test", "Could not create bmx280 driver.");
+        return;
+    }
+
+    ESP_ERROR_CHECK(bmx280_init(bmx280));
+
+    bmx280_config_t bmx_cfg = BMX280_DEFAULT_CONFIG;
+    ESP_ERROR_CHECK(bmx280_configure(bmx280, &bmx_cfg));
+
+    while (1)
+    {
+        ESP_ERROR_CHECK(bmx280_setMode(bmx280, BMX280_MODE_FORCE));
+        do {
+            vTaskDelay(pdMS_TO_TICKS(1));
+        } while(bmx280_isSampling(bmx280));
+
+        float temp = 0, pres = 0, hum = 0;
+        ESP_ERROR_CHECK(bmx280_readoutFloat(bmx280, &temp, &pres, &hum));
+
+        ESP_LOGI("test", "Read Values: temp = %f, pres = %f, hum = %f", temp, pres, hum);
+    }
+}
+```
+
+License
+-------
+This repository contains a lot of code I have written which is licensed under
+MIT, however there are sections modified from the BME280 datasheet which is
+unclearly licensed.
+
+The unclearly licensed section is clearly marked with two comments. Any code
+between `// HERE BE DRAGONS` and `// END OF DRAGONS` contains modified versions
+of the Bosch Sensortec code.
+
+Please take note of this in production.