HomeKit Python

With this code it is possible to implement either a HomeKit Accessory or simulate a HomeKit Controller.

The code presented in this repository was created based on release R1 from 2017-06-07.

Contributors

(The contributors are not listed in any particular order!)

Installation

Installation for IP based accessories

Simply use pip3 to install the package:

pip3 install --user homekit[IP]

This installation only for IP based accessories can be done without any operating system level installations and should also work on operating systems other than linux (Mac OS X, Windows, ...).

Installation for Bluetooth LE based accessories

This variant requires some packages on operating systems for the access onto Bluetooth LE via dbus. These can be installed on Debian based operating systems via:

apt install -y libgirepository1.0-dev gcc libcairo2-dev pkg-config python3-dev gir1.2-gtk-3.0 libdbus-1-dev

After that, using pip3 is sufficient again:

pip3 install --user homekit[BLE]

Installation for both type of accessories

In this case, install the packages for your operating system and afterwards use pip3:

pip3 install --user homekit[IP,BLE]

HomeKit Accessory

This package helps in creating a custom HomeKit Accessory.

The demonstration uses this JSON in ~/.homekit/demoserver.json:

{
  "name": "DemoAccessory",
  "host_ip": "$YOUR IP",
  "host_port": 8080,
  "accessory_pairing_id": "12:00:00:00:00:00",
  "accessory_pin": "031-45-154",
  "peers": {},
  "unsuccessful_tries": 0,
  "c#": 0,
  "category": "Lightbulb"

}

Now let's spawn a simple light bulb accessory as demonstration:

#!/usr/bin/env python3

import os.path

from homekit import HomeKitServer
from homekit.model import Accessory, LightBulbService


if __name__ == '__main__':
    try:
        httpd = HomeKitServer(os.path.expanduser('~/.homekit/demoserver.json'))

        accessory = Accessory('Licht')
        lightService = LightBulbService()
        accessory.services.append(lightService)
        httpd.accessories.add_accessory(accessory)

        httpd.publish_device()
        print('published device and start serving')
        httpd.serve_forever()
    except KeyboardInterrupt:
        print('unpublish device')
        httpd.unpublish_device()

If everything went properly, you should be able to add this accessory to your home on your iOS device.

HomeKit Controller

The following tools help to access HomeKit Accessories.

`init_controller_storage`

This tool initializes the HomeKit controller's storage file.

Usage:

python3 -m homekit.init_controller_storage -f ${PAIRINGDATAFILE}

The option -f specifies the name of the file to contain the controller's data.

`discover`

This tool will list all available HomeKit IP Accessories within the local network.

Usage:

python3 -m homekit.discover [-t ${TIMEOUT}] [-u] [--log ${LOGLEVEL}]

The option -t specifies the timeout for the inquiry. This is optional and 10s are the default.

The option -u activates a filter to show only unpaired devices. This is optional and deactivated by default.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

Output:

Name: smarthomebridge3._hap._tcp.local.
Url: http://192.168.178.21:51827
Configuration number (c#): 2
Feature Flags (ff): Paired (Flag: 0)
Device ID (id): 12:34:56:78:90:05
Model Name (md): Bridge
Protocol Version (pv): 1.0
State Number (s#): 1
Status Flags (sf): 0
Category Identifier (ci): Other (Id: 1)

Hints:

Some devices like the Koogeek P1EU Plug need bluetooth to set up wireless (e.g. join the wireless network) before. Use your phone or the proper app to perform this
paired devices should not show up

`discover_ble`

This tool will list all available HomeKit BLE Accessories within range of the Bluetooth LE device.

Usage:

python3 -m homekit.discover_ble [-t ${TIMEOUT}] [-u] [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -t specifies the timeout for the inquiry. This is optional and 10s are the default.

The option -u activates a filter to show only unpaired devices. This is optional and deactivated by default.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

Output:

Name: Koogeek-DW1-8ca86c
MAC: c6:cc:4d:a7:7c:5e
Configuration number (cn): 1
Device ID (id): B8:D1:29:61:A1:B0
Compatible Version (cv): 2
Global State Number (s#): 2
Status Flags (sf): The accessory has been paired with a controllers. (Flag: 0)
Category Identifier (ci): Sensor (Id: 10)

`identify`

This tool will use the Identify Routine of a HomeKit Accessory. It has 3 modes of operation.

identify unpaired Homekit IP Accessory

Usage:

python3 -m homekit.identify -d ${DEVICEID} [--log ${LOGLEVEL}]

The option -d specifies the device id of the accessory to identify. Can be obtained via discovery.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

identify unpaired Homekit BLE Accessory

Usage:

python3 -m homekit.identify -m ${MACADDRESS} [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -m specifies the Bluetooth LE mac id of the accessory to identify. Can be obtained via discovery_ble.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

identify paired Homekit Accessory

Usage:

python3 -m homekit.identify -f ${PAIRINGDATAFILE} -a ${ALIAS} [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

`pair`

This tool will perform a pairing to a new IP accessory.

Usage:

python3 -m homekit.pair -d ${DEVICEID} -p ${SETUPCODE} -f ${PAIRINGDATAFILE} -a ${ALIAS} [--log ${LOGLEVEL}]

The option -d specifies the device id of the accessory to pair. Can be obtained via discovery.

The option -p specifies the HomeKit Setup Code. Can be obtained from the accessory. This must look like XXX-XX-XXX (X is a single digit and the dashes are important).

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

The file with the pairing data will be required to send any additional commands to the accessory.

`pair_ble`

This tool will perform a pairing to a new Bluetooth LE accessory.

Usage:

python3 -m homekit.pair -m ${MACADDRESS} -p ${SETUPCODE} -f ${PAIRINGDATAFILE} -a ${ALIAS} [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -m specifies the device id of the accessory to pair. Can be obtained via discovery.

The option -p specifies the HomeKit Setup Code. Can be obtained from the accessory.

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

The file with the pairing data will be required to send any additional commands to the accessory.

`list_pairings`

This tool will perform a query to list all pairings of an accessory. The controller that performs the query must be registered as Admin. If this is not the case, no pairings are listed.

Usage:

python3 -m homekit.list_pairings -f ${PAIRINGDATAFILE} -a ${ALIAS} [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

This will print information for each controller that is paired with the accessory:

Pairing Id: 3d65d692-90bb-41c2-9bd0-2cb7a3a5dd18
        Public Key: 0xed93c78f80e7bc8bce4fb548f1a6681284f952d37ffcb439d21f7a96c87defaf
        Permissions: 1 (admin user)

The information contains the pairing id, the public key of the device and permissions of the controller.

`prepare_add_remote_pairing`

This tool will prepare data required for the add_additional_pairing command.

Usage:

python3 -m homekit.prepare_add_remote_pairing -f ${PAIRINGDATAFILE} -a ${ALIAS} \
        [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device to be added.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

This will print information to be fed into homekit.add_additional_pairing (via a second channel):

Please add this to homekit.add_additional_pairing:
    -i cec11edd-7363-42c4-8d13-aeb06b608ffc -k 0cbfd3abc377f6c3bfd3b4c119c1c5ff0c840ef1f9530e0f99c68b1f531dd66a

`add_additional_pairing`

This tool is used to tell a HomeKit Accessory accept a new pairing for an additional controller.

Usage:

python3 -m homekit.add_additional_pairing -f ${PAIRINGDATAFILE} -a ${ALIAS} \
        -i ${PAIRINGID} -k ${PUBLIC_KEY} -p ${LEVEL} [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device to be added.

The option -i specifies the additional controller's pairing id.

The option -k specifies the additional controller's public key.

The option -p specifies the additional controller's access privileges, this can be User or Admin for a pairing with higher privileges.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

This will print information to be fed into homekit.finish_add_remote_pairing (via a second channel):

Please add this to homekit.finish_add_remote_pairing:
    -c BLE -i D0:CA:1E:56:13:AA -m cb:e0:b0:c9:e8:72 -k a07c471e12682b161034b91c0d016201516eb51d9bf1071b6dcf0e3be71e9269

`finish_add_remote_pairing`

This tool finalizes the addition of a pairing to a HomeKit Accessory.

Usage:

python3 -m homekit.finish_add_remote_pairing -f ${PAIRINGDATAFILE} -a ${ALIAS} \
        -c ${CONNECTIONTYPE} -i ${DEVICEID} -k ${DEVICEPUBLICKEY} \
        [-m ${MACADDRESS}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device to be added.

The option -c specifies the type of connection for the accessory (values are IP and BLE).

The option -i specifies the accessory's device id.

The option -k specifies the accessory's public key.

The option -m specifies the accessory's mac address for Bluetooth Low Energy accessories. This is not required for IP accessories.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

`remove_pairing`

This tool will remove a pairing from an accessory.

Usage:

python -m homekit.remove_pairing -f ${PAIRINGDATAFILE} -a ${ALIAS} [-i ${PAIRINGID}] [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option -i specifies the controller pairing id to remove. This is optional. If left out, the calling controller's pairing id is used and the controller looses the ability to controll the device. See the output of list_pairings how to get the controller's pairing id. Important: this is not the accessory's device id.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

`get_accessories`

This tool will read the accessory attribute database.

Usage:

python3 -m homekit.get_accessories -f ${PAIRINGDATAFILE} -a ${ALIAS} [-o {json,compact}] [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option -o specifies the format of the output:

json displays the result as pretty printed JSON
compact reformats the output to get more on one screen

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

Using the compact output the result will look like:

1.1: >accessory-information<
  1.2: Koogeek-P1-770D90 () >name< [pr]
  1.3: Koogeek () >manufacturer< [pr]
  1.4: P1EU () >model< [pr]
  1.5: EUCP031715001435 () >serial-number< [pr]
  1.6:  () >identify< [pw]
  1.37: 1.2.9 () >firmware.revision< [pr]
1.7: >outlet<
  1.8: False () >on< [pr,pw,ev]
  1.9: True () >outlet-in-use< [pr,ev]
  1.10: Outlet () >name< [pr]

`get_characteristic`

This tool will read values from one or more characteristics.

Usage:

python3 -m homekit.get_characteristic -f ${PAIRINGDATAFILE} -a ${ALIAS} -c ${CHARACTERISTICS} [-m] [-p] [-t] [-e] \
                                     [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option -c specifies the characteristics to read. The format is <aid>.<cid>. This option can be repeated to retrieve multiple characteristics with one call (e.g. -c 1.9 -c 1.8).

The option -m specifies if the meta data should be read as well.

The option -p specifies if the permissions should be read as well.

The option -t specifies if the type information should be read as well.

The option -e specifies if the event data should be read as well.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

For example, this command reads 2 characteristics of a Koogeek P1EU Plug:

python3 -m homekit.get_characteristic -f koogeek.json -a koogeek -c 1.8 -c 1.9

The result will be a json with data for each requested characteristic:

{
    "1.8": {
        "value": false
    },
    "1.9": {
        "value": true
    }
}

`put_characteristic`

This tool will write values to one or more characteristics.

Usage:

python3 -m homekit.put_characteristic -f ${PAIRINGDATAFILE} -a ${ALIAS} -c ${Characteristics} ${value} \
                                     [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option -c specifies the characteristics to change. The format is <aid>.<cid> <value>. This option can be repeated to change multiple characteristics with one call (e.g. -c 1.9 On -c 1.8 22.3) .

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

For example, this command turns of a Koogeek P1EU Plug:

python3 -m homekit.put_characteristic -f koogeek.json -a koogeek -c 1.8 false

No output is given on successful operation or a error message is displayed.

`get_events`

!!Not yet implemented for Bluetooth LE Accessories!!

This tool will register with an accessory and listen to the events send back from it.

Usage

python3 -m homekit.get_events -f ${PAIRINGDATAFILE} -a ${ALIAS} -c ${Characteristics} \
                             [--adapter ${ADAPTER}] [--log ${LOGLEVEL}]

The option -f specifies the file that contains the pairing data.

The option -a specifies the alias for the device.

The option -c specifies the characteristics to change. The format is <aid>.<cid>. This option can be repeated to listen to multiple characteristics with one call.

The option --adapter specifies which Bluetooth device to use. This is optional and hci0 is the default and is only used if the paired device is using Bluetooth LE.

The option --log specifies the log level for the command. This is optional. Use DEBUG to get more output.

For example, you can listen to characteristics 1.8 (on characteristic), 1.22 (1 REALTIME_ENERGY) and 1.23 (2 CURRENT_HOUR_DATA) of the Koogeek P1EU Plug with:

python3 -m homekit.get_events -f koogeek.json -a koogeek -c 1.8 -c 1.22 -c 1.23

This results in

event for 1.8: True
event for 1.22: 6.0
event for 1.23: 0.01666
event for 1.22: 17.0
event for 1.23: 0.06388
event for 1.23: 0.11111
event for 1.22: 18.0
event for 1.23: 0.16111
event for 1.8: False

HomeKit Accessory

Devices Reported to work

The code was tested with the following devices by the author:

Koogeek P1EU Plug (IP) (Vendor)
Koogeek DW1 (BLE) (Vendor)
OSRAM SMART+ Classic E27 Multicolor (BLE) (Vendor)

Users have tried (and succeeded, not checked by the author) to use the following devices:

Ikea TRÅDFRI (IP) (Issue #13)
Philips Hue (IP) (Issue #13)
Leviton DH6HD-1BZ (IP) (Issue #16)
Lutron Caseta (IP) (Smart Bridge 2 / Issue #17)
iHome iSP5 (IP) (Issue #18)
Xiaomi Mi Bedside Lamp 2 (IP) (Issue #116)

Name		Name	Last commit message	Last commit date
Latest commit History 592 Commits
.travis		.travis
doc		doc
docker_supplementals		docker_supplementals
homekit		homekit
staging		staging
tests		tests
.coveragerc		.coveragerc
.gitattributes		.gitattributes
.gitignore		.gitignore
.travis.yml		.travis.yml
Dockerfile		Dockerfile
Dockerfile_tests		Dockerfile_tests
LICENSE		LICENSE
LICENSE.md		LICENSE.md
README.md		README.md
Tests.md		Tests.md
demoserver.py		demoserver.py
requirements.txt		requirements.txt
requirements_osx.txt		requirements_osx.txt
setup.cfg		setup.cfg
setup.py		setup.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Licenses found

Repository files navigation

HomeKit Python

Contributors

Installation

Installation for IP based accessories

Installation for Bluetooth LE based accessories

Installation for both type of accessories

HomeKit Accessory

HomeKit Controller

`init_controller_storage`

`discover`

`discover_ble`

`identify`

identify unpaired Homekit IP Accessory

identify unpaired Homekit BLE Accessory

identify paired Homekit Accessory

`pair`

`pair_ble`

`list_pairings`

`prepare_add_remote_pairing`

`add_additional_pairing`

`finish_add_remote_pairing`

`remove_pairing`

`get_accessories`

`get_characteristic`

`put_characteristic`

`get_events`

HomeKit Accessory

Devices Reported to work

About

Licenses found

Releases

Packages

Languages

License

Licenses found

fennec622/homekit_python

Folders and files

Latest commit

History

Repository files navigation

HomeKit Python

Contributors

Installation

Installation for IP based accessories

Installation for Bluetooth LE based accessories

Installation for both type of accessories

HomeKit Accessory

HomeKit Controller

init_controller_storage

discover

discover_ble

identify

identify unpaired Homekit IP Accessory

identify unpaired Homekit BLE Accessory

identify paired Homekit Accessory

pair

pair_ble

list_pairings

prepare_add_remote_pairing

add_additional_pairing

finish_add_remote_pairing

remove_pairing

get_accessories

get_characteristic

put_characteristic

get_events

HomeKit Accessory

Devices Reported to work

About

Resources

License

Licenses found

Stars

Watchers

Forks

Releases

Packages 0

Languages

`init_controller_storage`

`discover`

`discover_ble`

`identify`

`pair`

`pair_ble`

`list_pairings`

`prepare_add_remote_pairing`

`add_additional_pairing`

`finish_add_remote_pairing`

`remove_pairing`

`get_accessories`

`get_characteristic`

`put_characteristic`

`get_events`

Packages