[Archived] Project Eudico

---

This repo is where the first of MVP for the IPC (InterPlanetary Consensus) framework and other consensus-related experiments by ConsensusLab were implemented and tested. This fork of Lotus is no longer maintained and a lot of the features and protocol tested here are being productionized in a new and improved version of Eudico.

We keep this repo archived for historical relevance and future reference (it still includes a lot of valuable code that haven't been merged and implemented in production). If you are looking to test Eudico in a testnet refer to Spacenet. You can also learn more about all of our ongoing projects and research at https://consensuslab.world.

---

Eudico is a modularised implementation of Lotus, itself an implementation of the Filecoin Distributed Storage Network. For more details about Filecoin, check out the Filecoin Spec. This is a work-in-progress, intended to enable easier experimentation with future protocol features, and is not meant to be used in the production network.

Building & Documentation

Note: The default eudico branch is the dev branch, please use with caution.

For complete instructions on how to build, install and setup eudico, please visit the Lotus documentation at https://docs.filecoin.io/get-started/lotus. Basic build instructions can be found further down in this readme.

Reporting a Vulnerability

Please send an email to [email protected]. See our security policy for more details.

Related packages

These repos are independent and reusable modules, but are tightly integrated into Lotus/Eudico to make up a fully featured Filecoin implementation:

• go-fil-markets which has its own kanban work tracker available here
• specs-actors which has its own kanban work tracker available here

Contribute

Eudico is an open project and welcomes contributions of all kinds: code, docs, and more. However, before making a contribution, we ask you to heed these recommendations.

When implementing a change:

1. Adhere to the standard Go formatting guidelines, e.g. Effective Go. Run go fmt.
2. Stick to the idioms and patterns used in the codebase. Familiar-looking code has a higher chance of being accepted than eerie code. Pay attention to commonly used variable and parameter names, avoidance of naked returns, error handling patterns, etc.
3. Comments: follow the advice on the Commentary section of Effective Go.
4. Minimize code churn. Modify only what is strictly necessary. Well-encapsulated changesets will get a quicker response from maintainers.
5. Lint your code with golangci-lint (CI will reject your PR if unlinted).
6. Add tests.
7. Title the PR in a meaningful way and describe the rationale and the thought process in the PR description.
8. Write clean, thoughtful, and detailed commit messages. This is even more important than the PR description, because commit messages are stored inside the Git history. One good rule is: if you are happy posting the commit message as the PR description, then it's a good commit message.

Basic Build Instructions

System-specific Software Dependencies:

Building Eudico requires some system dependencies, usually provided by your distribution.

Ubuntu/Debian:

sudo apt install mesa-opencl-icd ocl-icd-opencl-dev gcc git bzr jq pkg-config curl clang build-essential hwloc libhwloc-dev wget -y && sudo apt upgrade -y

Fedora:

sudo dnf -y install gcc make git bzr jq pkgconfig mesa-libOpenCL mesa-libOpenCL-devel opencl-headers ocl-icd ocl-icd-devel clang llvm wget hwloc libhwloc-dev

For other distributions you can find the required dependencies here. For instructions specific to macOS, you can find them here.

Go

To build Eudico, you need a working installation of Go 1.17.9 or higher:

wget -c https://golang.org/dl/go1.17.9.linux-amd64.tar.gz -O - | sudo tar -xz -C /usr/local

TIP: You'll need to add /usr/local/go/bin to your path. For most Linux distributions you can run something like:

echo "export PATH=$PATH:/usr/local/go/bin" >> ~/.bashrc && source ~/.bashrc

See the official Golang installation instructions if you get stuck.

Build and install Eudico

Once all the dependencies are installed, you can build and install Eudico.

1. Clone the repository:

   git clone https://github.com/filecoin-project/eudico.git
   cd eudico/

Note: The default branch eudico is the dev branch where the latest new features, bug fixes and improvement are in.

2. Build Eudico:

   make eudico

   This will create the eudico executable in the current directory.

Run a local test network.

Note: eudico uses the $HOME/.eudico folder by default for storage (configuration, chain data, wallets, etc). See advanced options for information on how to customize the folder. If you want to run more than one Eudico node the same host, you need to tell the nodes to use different folders (see FAQ) Make sure that this directory does not exist when you are starting a new network.

First, a key needs to be generated. In order to do that, compile the Lotus key generator:

make lotus-keygen

Then, generate a key:

./lotus-keygen -t secp256k1

This creates a key file, with the name f1[...].key (e.g. f16dv4rlp3b33d5deasf3lxkrbfwhi4q4a5uw5scy.key) in the local directory. The file name, without the .key extension, is the corresponding Filecoin address. If this is the only key you generated so far, you can obtain the address, for example, by running

ADDR=$(echo f1* | tr '.' ' ' | awk '{print $1}')

Use this address to create a genesis block for the system and start the Eudico daemon. The following command uses the delegated consensus.

./eudico delegated genesis $ADDR gen.gen
./eudico delegated daemon --genesis=gen.gen

The daemon will continue running until you stop it. To start a miner, first import a wallet, using the generated key (replacing f1*.key by the generated key file if more than one key is present in the directory).

./eudico wallet import --format=json-lotus f1*.key

Then, start the miner.

./eudico delegated miner

License

Dual-licensed under MIT + Apache 2.0