If you like the library, support me with a donation.
"Some things are priceless - for everything else there is this donation fund"
"Coffee is a good partner - but it also has to be paid for"
https://www.paypal.me/LittleSatan666
Thank You!
- 1.Up to 15 transmitters with two buttons or one button.
- 2.RcSwitch and NewRemoteswitch mixed possible.
- 3.Each transmitter can broadcast on its own frequency.
- 4.Dimmer for NewRemoteSwitch. Can dim compatible lamps.
- 5.Monitor mode.
- 6.Repeater and receiver mode.
- 7.Transmitters can be taught in or manually set.
- 8.Ap mode and client mode.
- 9.For access via the internet see the instructions.
20.01.2019
Driver Library :Spi options have been removed. (Problems with ESP32) FIXED!
notes :everything was checked again. D-SUN module on esp8266 / 32 and so on.
17.01.2019
Version notes :Spi was reconfigured for fix some issuses.
Driver Library :HotFix for cc1101 module with "8pins"(example DSun). Transmitting on Esp8266 based bords not work. FIXED!
Driver Library :Change "SpiReadStatus" to public. Now can read RSSI Level!
Driver Library :Spi transfer rate was limited to cc1101 max transfer rate (10mhz).
Driver Library :After using Spi, it will now be disabled. (receive data from serial monitor and rx pin was not working on Esp 8266/32) FIXED!
Add Examples :ReceiveDemo_Simple_with_RSSI_cc1101.ino (Shows reception strength)
Add Examples :Frequency_Scanner_cc1101.ino (Scans Transmitting frequency of your remotes. No good results with cc1101-DSun)
Add Examples :ProtocolAnalyzeDemo_cc1101.ino (for scan unknown protokolls. Requires: link is in sketch!)
3.1.2019
Driver Library :Spi corrections for esp32. Spi Pin changes did not work on esp32. FIXED!
18.12.2018
Driver Library :Own Spi pin settings possible. Allows the use of other microcontrollers. Allows you to use multiple CC1101s. More information in the commands.txt
Add TXT :driver lib commands and examples.txt
27.11.2018
Driver Library :setESP8266 has been removed. Pins are set automatically with the init command.
Driver Library :Arduino mega SPI pins added.
Driver Library :Added setGDO pins (For libraries that directly address the GDO pins).Like this https://github.com/EinfachArne/Somfy_Remote . Example ELECHOUSE_CC1101.setGDO(2, 4); // (pin2 = GDO0, pin4 = GDO2).
Add Wiring TXT :WIRING MEGA.txt
Add Wiring JPG :WIRING MEGA.jpg
LICENSE :LICENSE.txt Update.
notes :setGDO is not compatible with RC_Switch / NewRemotSwitch.
16.11.2018
Fixes Remotes Fusion :Receive mode and Repeater mode frequency, changes to the transmitter frequency after pressing on a transmitter. (RemotesFusion.ino)Fixed!
NewRemoteSwitch :LearnCode_cc1101.ino (corrections).
Added :Keywords.txt added.
07.11.2018
New Sketch :Clear_EEPROM.ino (if there are problems with the access point password or if you want to use your ESP for other projects).
18.10.2018
New Sketch :RemotesFusion.ino.
New Apk´s :RemotesFusion_V1_en.apk / RemotesFusion_V1_de.apk.
Add Docs :Docs and manuals for RemotesFusion.
Changes :channel spacing and channel set was removed from the examples. unnecessary because exact frequency can be set.
notes :RemotesFusion is an application with which Rc-Switch and NewRemoteSwitch can be controlled at the same time. A universal remote control APP with many possibilities. Only for Esp 8266/32 modules! For more information, watch the docs.
02.09.2018
Driver Library :Added pin settings for esp32.
Examples :Added pin settings for esp32 examples.
Add Wiring JPG :Add Wiring JPG esp32.
Add Wiring TXT :Add Wiring TXT esp32.
Add Wiring JPG :Add Wiring JPG esp32 for Receive_Send_Decimal_Demo_Simple.ino.
16.08.2018
Examples :All NewRemoteSwitch examples are compatible with ESP. Exception Retransmitter_cc1101.ino.
Driver Library :Frequency calculator calibrated. Difference -0.01 MHz. (Fixed!) Frequency is now accurate.
10.08.2018
Driver Library :Now you can Switch the frequency in loop. Examples: ELECHOUSE_cc1101.SetTx(433.92); and ELECHOUSE_cc1101.SetRx(433.92);.
09.08.2018
Driver Library :Now you can enter your base frequency directly.The library calculates the settings automatically. example(433.92)
Driver Library :Remove freq2, freq1 and freq0 Settings.
Driver Library :Removed unnecessary entries. the library shrank from 32,8kb(.cpp) and 9,38kb(.h) to 17,0kb(.cpp) and 7,87kb(.h).
New Example :(NewRemoteSwitch Library) NewRemoteRepeater.ino. Repeat the Received signal 1to1. Best thanks to Roman for write it.
05.08.2018
Examples Fix (rc-switch):Fix auto receive pulse. Received pulse don´t transmit. Fixed!(Repeater.ino and Receive_Send_Decimal_Demo_Simple.ino).
03.08.2018
Esp8266 :Compatibility for all RC switch examples.
Driver Library :Add the GDO2 pin for Receive. Change GDO0 to send.
Wiring changes :Description in jpg's and txt's.
Examples :All examples have been adjusted.
Examples :Esp and Arduino are set automatically.
31.07.2018
New :Supportet NewRemoteSwitch Library. For wireless sockets by trust smart home, Smappee, DI-O Chacon, Intertechno and others. You want to use it? Then you need that https://github.com/1technophile/NewRemoteSwitch
Add Examples :NewRemoteSwitch Compatible examples.
Driver Library :You can now switch directly from Tx to Rx in the loop. Without resetting the cc1101.
Add Examples :New Repeater Example for Rc-switch. For example, to increase the range of your remote control.
Example changes :Receive_Send_Decimal_Demo_Simple.ino (remove unnecessary commands).
Examples Fix :Rc-Switch examples fix TypeA, TypeB and TypeD (missing from semicolon to SetTx).
Notes :NewRemoteSwitch examples Retransmitter_cc1101.ino and LightShow_cc1101.ino only Arduino!!!
Notes :Rc-switch example Repeater_cc1101.ino only Arduino!!!
Notes :Rc-switch example Receive_Send_Decimal_Demo_Simple.ino only Arduino!!!
26.07.2018
Driver Library :esp8266 Compatibility (Tested with Wemos d1 mini).
Driver Library :Change default Receive filter bandwidth to 812khz (max).
Driver Library :Change default Tx Power to PA10 (max).
Examples :Add set esp command and pin settings.
Examples :Diskription change.
Demo Example :Add auto Recive and Send pulse length. (Receive_Send_Decimal_Demo_Simple.ino)
Add Wiring JPG :Add Wiring JPG esp8266.
Add Wiring TXT :Add Wiring TXT esp8266.
Notes :esp8266 pin D4 don´t work with receive, Transmit and receive is set to D2.
Notes :esp8266 don´t work with Receive_Send_Decimal_Demo_Simple.ino (freezes when reset cc1101).
30.03.2018:
Driver Library Fix :no effect set by transmission power.
Driver Library :Transmitting power can be adjusted via frequency(example in the sketches).
Examples :Command Tx Power cleared.
Examples Fix :set Receive filter bandwidth (command incomplete) Fixed.
25.03.2018:
Driver Library :Add Channel List. Now you can set channel numbers 0-255.
Driver Library :Add bandwidth can be adjusted
Driver Library :transmission power can be adjusted
Driver Library :can set your own frequency settings (freq2, freq1, freq0)
Driver Library :Channel spacing can be set.
Examples :Add set new commands
20.03.2018:
Driver Library :Add 315Mhz Support.
Driver Library :Add Channel command for finetune (80khz steps) from 420mhz - 440mhz / 302mhz - 322mhz.
Examples :Add set channel command in examples.
19.03.2018:
Driver Library Fix :Calibrated Frequency from 433.86 to 433.92 - 433.93 Mhz.
Driver Library :cc1101 reset command added (allows switching between send and receive.)
New Demo Example :Receive_Send_Decimal_Demo_Simple.ino (Sends last received decimal code) To illustrate the change between RX and TX (press button = send / do not press button = receive)
Add Wiring JPG :Wiring for Receive_Send_Decimal_Demo_Simple.ino
Add Wiring JPG :Wiring for Nano / Uno
18.03.2018:
cc1101 Compatibility for RC-Switch.
cc1101 RC-Switch Compatible examples.