Update v1.2_build_guide.md

v1.2/v1.2_build_guide.md

@@ -28,11 +28,11 @@ Align the center divit of the clip with the USB C hole on the foot, and weld it
 
 
 
-One of the unique design choices that I made with this keyboard design was to split the bottom case from the foot. This means that we can use this more interesting and proper-looking foot design, we have a nice smooth surface on both the bottom case and the bottom of the foot, and we avoid all of the annoying support material we would otherwise need. This is in my opinion more than worth the small trade-off of having to weld them together on the inside. 
+One of the unique design choices that I made with this keyboard design was to split the bottom case from the foot. This means that we can use this more interesting and proper-looking foot design, we have a nice smooth surface on both the bottom case and the bottom of the foot, and we avoid all of the annoying support material we would otherwise need. This is in my opinion more than worth the small trade-off of having to weld them together on the inside. If done right, it looks completely seamless from the outside! 
 
 ![foot_welded](https://github.com/galile0-designs/glyphkbd/assets/134774462/9783d125-4a1c-4f56-9e96-d13fba07e498)
 
-Use the 3D pen with some loose filament kind of like a MIG welder, extruding molten plastic into the gap. Before you begin, it's best to make sure that the foot and case are aligned properly with an even gap all the way around. When welding, it's best to go slowly and sort of massage the plastic into both sides of the seam, you don't want a cold weld and no pen.
+Use the 3D pen with some loose filament kind of like a MIG welder, extruding molten plastic into the gap. Before you begin, it's best to make sure that the foot and case are aligned properly with an even gap all the way around. When welding, it's best to go slowly and sort of massage the plastic into both sides of the seam, you don't want a cold weld.