Update README.md

README.md

@@ -4,20 +4,20 @@
 ![DSC_0008](https://github.com/galile0-designs/glyphkbd/assets/134774462/0f9bec99-c76c-4ecc-a129-9ab1ce3d6208)
 the latest build, v1.2 with MT3 3277
 
-## Inspiration
+### Inspiration
 glyph was largely inspired by [drFaustroll's amazing mlego m65](https://mlego.elena.space/m65/) as well as the gorgeous [Stucco.](https://www.reddit.com/r/CustomKeyboards/comments/10k8k6w/custom_ortho_tkl_done_stucco1510/) 
 
-## Some more glyph
+### Some more glyph
 ![DSC_0020](https://github.com/galile0-designs/glyphkbd/assets/134774462/0d69dcc5-ae64-4f41-9b0d-04ac140818c2)
 v1 with MTNU Susu
 
 ![DSC_0005](https://github.com/galile0-designs/glyphkbd/assets/134774462/6a66da9b-4a4c-4f8b-aba8-3e628babb39b)
 v1.1 with 3277
 
-## v1.x
-v1.2 build guide found [here.](https://github.com/galile0-designs/glyphkbd/blob/main/v1.2/v1.2_build_guide.md)
+# v1.x
+**v1.2 build guide found [here.](https://github.com/galile0-designs/glyphkbd/blob/main/v1.2/v1.2_build_guide.md)**
 
 v1.x of glyph are 3d-printed and handwired builds. Since it was so novel to me and I didn't know if I would actually like the layout, it made sense not to dive straight in with a PCB and expensive cnc case, so for v1.x I went with a handwired, 3d-printed approach. glyph v1.x uses sealing strips as a mounting method, I first learned about this method from [KotteCE's Batoid](https://github.com/kotte-computer-electronics/batoid). I have to say it's the best mounting method I've discovered so far for these types of DIY, 3D-printed handwire boards, far better than my previous experiments. It generally sounds pretty good as well.
 
-## License
+# License
 glyph is licensed under CERN Open Hardware Licence Version 2 - Strongly Reciprocal