Merge remote-tracking branch 'upstream/master' into develop

docs/feature_autocorrect.md

@@ -86,7 +86,7 @@ The `qmk generate-autocorrect-data` commands can make an effort to check for ent
 
 ## Overriding Autocorrect
 
-Occasionally you might actually want to type a typo (for instance, while editing autocorrection_dict.txt) without being autocorrected. There are a couple of ways to do this:
+Occasionally you might actually want to type a typo (for instance, while editing autocorrect_dict.txt) without being autocorrected. There are a couple of ways to do this:
 
 1. Begin typing the typo.
 2. Before typing the last letter, press and release the Ctrl or Alt key.
@@ -238,13 +238,13 @@ bool apply_autocorrect(uint8_t backspaces, const char *str) {
 
 ## Appendix: Trie binary data format :id=appendix
 
-This section details how the trie is serialized to byte data in autocorrection_data. You don’t need to care about this to use this autocorrection implementation. But it is documented for the record in case anyone is interested in modifying the implementation, or just curious how it works.
+This section details how the trie is serialized to byte data in autocorrect_data. You don’t need to care about this to use this autocorrection implementation. But it is documented for the record in case anyone is interested in modifying the implementation, or just curious how it works.
 
 What I did here is fairly arbitrary, but it is simple to decode and gets the job done.
 
 ### Encoding :id=encoding
 
-All autocorrection data is stored in a single flat array autocorrection_data. Each trie node is associated with a byte offset into this array, where data for that node is encoded, beginning with root at offset 0. There are three kinds of nodes. The highest two bits of the first byte of the node indicate what kind:
+All autocorrection data is stored in a single flat array autocorrect_data. Each trie node is associated with a byte offset into this array, where data for that node is encoded, beginning with root at offset 0. There are three kinds of nodes. The highest two bits of the first byte of the node indicate what kind:
 
 * 00 ⇒ chain node: a trie node with a single child.
 * 01 ⇒ branching node: a trie node with multiple children.

docs/feature_split_keyboard.md

@@ -132,28 +132,25 @@ To enable this method, add the following to your `config.h` file:
 #define EE_HANDS
 ```
 
-Next, you will have to flash the EEPROM files once for the correct hand to the controller on each halve. You can do this manually with the following bootloader targets while flashing the firmware:
+Next, you will have to flash the correct handedness option to the controller on each halve. You can do this manually with the following bootloader targets using `qmk flash -kb <keyboard> -km <keymap> -bl <bootloader>` command to flash:
 
-* AVR controllers with the Caterina bootloader (e.g. Pro Micro):
-  * `:avrdude-split-left`
-  * `:avrdude-split-right`
-* AVR controllers with the stock Amtel DFU or DFU compatible bootloader (e.g. Elite-C):
-  * `:dfu-split-left`
-  * `:dfu-split-right`
-* ARM controllers with a DFU compatible bootloader (e.g. Proton-C):
-  * `:dfu-util-split-left`
-  * `:dfu-util-split-right`
-* ARM controllers with a UF2 compatible bootloader:
-  * `:uf2-split-left`
-  * `:uf2-split-right`
-
-Example:
+|Microcontroller Type|Bootloader Parameter|
+|--------------------|--------------------|
+|AVR controllers with Caterina bootloader<br>(e.g. Pro Micro)|`avrdude-split-left`<br>`avrdude-split-right`|
+|AVR controllers with the stock Amtel DFU or DFU compatible bootloader<br>(e.g. Elite-C)|`dfu-split-left`<br>`dfu-split-right`|
+|ARM controllers with a DFU compatible bootloader<br>(e.g. Proton-C)|`dfu-util-split-left`<br>`dfu-util-split-right`|
+|ARM controllers with a UF2 compatible bootloader<br>(e.g. RP2040)|`uf2-split-left`<br>`uf2-split-right`|
 
+Example for `crkbd/rev1` keyboard with normal AVR Pro Micro MCUs, reset the left controller and run:
+```
+qmk flash -kb crkbd/rev1 -km default -bl avrdude-split-left
+```
+Reset the right controller and run:
 ```
-make crkbd:default:avrdude-split-left
+qmk flash -kb crkbd/rev1 -km default -bl avrdude-split-right
 ```
 
-?> ARM controllers using `dfu-util` will require an EEPROM reset after setting handedness. This can be done using the `EE_CLR` keycode or [Bootmagic Lite](feature_bootmagic.md). Controllers using emulated EEPROM will always require handedness parameter when flashing the firmware.
+?> Some controllers (e.g. Blackpill with DFU compatible bootloader) will need to be flashed with handedness bootloader parameter every time because it is not retained between flashes.
 
 ?> [QMK Toolbox]() can also be used to flash EEPROM handedness files. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
 

keyboards/baion_808/baion_808.c

@@ -0,0 +1,22 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "baion_808.h"
+
+void led_init_ports(void) {
+    // Set our LED pins as open drain outputs
+    palSetLineMode(LED_CAPS_LOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN);
+    palSetLineMode(LED_SCROLL_LOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN);
+}

keyboards/baion_808/baion_808.h

@@ -0,0 +1,164 @@
+/* Copyright 2022 Yiancar-Designs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define XXX KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K3C,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,           K4F,      \
+    K50, K51, K52,                K56,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K3C,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4C,           K4F,      \
+    K50, K51, K52,                K56,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_ansi_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K3C,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,           K4F,      \
+    K50, K51, K52,                K56,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_ansi_tsangan( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K3C,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4C,           K4F,      \
+    K50, K51, K52,                K56,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_ansi_tsangan_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K3C,      K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,                     \
+    K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,           K4F,      \
+    K50, K51, K52,                K56,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_iso( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4C,           K4F,      \
+    K50, K51, K52,                K56,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_iso_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,           K4F,      \
+    K50, K51, K52,                K56,                K5A, K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_iso_tsangan( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4C,           K4F,      \
+    K50, K51, K52,                K56,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}
+
+#define LAYOUT_tkl_iso_tsangan_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,           K0E, K0F, KOG, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2E, K2F, K2G, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,                     \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,           K4F,      \
+    K50, K51, K52,                K56,                     K5B, K5C, K5D,      K5E, K5F, K5G  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, KOG }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, XXX }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \
+    { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E, K5F, K5G }  \
+}

keyboards/baion_808/config.h

@@ -0,0 +1,66 @@
+/*
+Copyright 2022 Yiancar-Designs
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published byß
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define MATRIX_ROW_PINS { A2, A14, A15, B3, B4, B5 }
+#define MATRIX_COL_PINS { A1, B9, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15, A8 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Ensure we jump to bootloader if the RESET keycode was pressed */
+#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+
+/* Indicator LEDs */
+#define LED_CAPS_LOCK_PIN B6
+#define LED_SCROLL_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO