The Great Labelling Machine

Following Microsoft's purchase of Github, this project has migrated to gitlab.

This repo contains code for:

• The GLM Simulator/Visualization:
• The same code can either simulate the full physical machine or simply receive and display the state of the physical machine.
• The GLM Machine code:
• Arduino code to run the machine and communicate with the visualization.

Which code do you need?

• Arduino:
• All the code in the directory Arduino/labellingMachine_n where n is the biggest number in the list
• Visualization:
• All the code in the directory Processing/labellingMachine_n where n is the biggest number

Execution:

• Arduino:
  • hwConfig.h update the HWConfig class to correspond to your physical installation
  • config.h update any values, but be very careful as to what they mean! ask if unsure
  • config.cpp if needed, update ONLY Config::RAdegrees to the actual angle of the tag/label ramps
  • compile and upload to the arduino
• PC:
  • First build the applicaiton:
    • open the processing.org IDE and open the file Processing/labellingMachine_n/labellingMachine_n.pde
    • use the file menu - export application to build the applciaton for the target platform(s) of interest
  • Then execute it:
    • open a terminal in the application directory corresponding to the target platform
    • execute ./labellingMachine_n PortName where n is the correct number and PortName is the Serial port being used by the Arduino, for example
      $ ./labellingMachine_4 /dev/ttyACM0
    • NOTE: if no port is provided, the application will execute in simulation mode to demonstrate how it works, but it will not open a connection to the arduino.