Add documentation for ntfy integration #36833
Conversation
home-assistant
bot
added
has-parent
✅ Deploy Preview for home-assistant-docs ready!
To edit notification comments on pull requests, go to your Netlify site configuration. |
📝 WalkthroughWalkthroughThe pull request introduces a new Home Assistant integration for ntfy, an HTTP-based pub-sub notification service. The documentation provides comprehensive setup instructions for users to configure push notifications using ntfy. It covers the integration's purpose, prerequisites, configuration parameters, and usage guidelines, enabling users to send notifications to mobile devices and desktops through a dedicated notify entity. Changes
Sequence DiagramsequenceDiagram
participant User
participant HomeAssistant
participant NtfyService
participant MobileDevice
User->>HomeAssistant: Configure ntfy integration
HomeAssistant->>NtfyService: Register topic
NtfyService-->>HomeAssistant: Confirmation
User->>HomeAssistant: Send notification
HomeAssistant->>NtfyService: Publish message
NtfyService->>MobileDevice: Push notification
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
source/_integrations/ntfy.markdown (2)
30-41: Clean up trailing spacesThere are trailing spaces at the end of several lines in this section. While this doesn't affect the rendered output, it's good practice to remove them for consistency.
🧰 Tools
🪛 Markdownlint (0.37.0)
30-30: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
31-31: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
34-34: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
38-38: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
56-56: Add missing comma for better readabilityAdd a comma after "notifications" for better sentence structure.
-To publish notifications you can use the `notify.send_message` action. +To publish notifications, you can use the `notify.send_message` action.🧰 Tools
🪛 LanguageTool
[typographical] ~56-~56: It seems that a comma is missing.
Context: ... with the name of the topic. To publish notifications you can use thenotify.send_messagea...(IN_ORDER_TO_VB_COMMA)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/ntfy.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/ntfy.markdown
[typographical] ~56-~56: It seems that a comma is missing.
Context: ... with the name of the topic. To publish notifications you can use the notify.send_message a...
(IN_ORDER_TO_VB_COMMA)
🪛 Markdownlint (0.37.0)
source/_integrations/ntfy.markdown
30-30: Expected: 0 or 2; Actual: 4
Trailing spaces
(MD009, no-trailing-spaces)
31-31: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 4
Trailing spaces
(MD009, no-trailing-spaces)
34-34: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
38-38: Expected: 0 or 2; Actual: 4
Trailing spaces
(MD009, no-trailing-spaces)
58-58: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
68-68: null
Fenced code blocks should be surrounded by blank lines
(MD031, blanks-around-fences)
77-77: null
Files should end with a single newline character
(MD047, single-trailing-newline)
🔇 Additional comments (3)
source/_integrations/ntfy.markdown (3)
7-7: Verify the release versionThe release version is set to
2025.2which is in the future. Please ensure this aligns with the planned release schedule or adjust it to the correct version.
63-69: LGTM! Well-structured example configuration.The YAML example is clear, concise, and demonstrates the basic usage effectively.
🧰 Tools
🪛 Markdownlint (0.37.0)
68-68: null
Fenced code blocks should be surrounded by blank lines(MD031, blanks-around-fences)
1-77: Overall excellent documentation structure and contentThe documentation is comprehensive and well-organized, covering all essential aspects of the ntfy integration:
- Clear prerequisites and setup instructions
- Well-documented configuration parameters
- Practical usage examples
- Complete removal instructions
Just a few minor formatting and typographical issues to address, but otherwise ready to merge.
🧰 Tools
🪛 LanguageTool
[typographical] ~56-~56: It seems that a comma is missing.
Context: ... with the name of the topic. To publish notifications you can use thenotify.send_messagea...(IN_ORDER_TO_VB_COMMA)
🪛 Markdownlint (0.37.0)
30-30: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
31-31: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
34-34: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
38-38: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
58-58: Expected: 1; Actual: 2
Multiple consecutive blank lines(MD012, no-multiple-blanks)
68-68: null
Fenced code blocks should be surrounded by blank lines(MD031, blanks-around-fences)
77-77: null
Files should end with a single newline character(MD047, single-trailing-newline)
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
source/_integrations/ntfy.markdown (3)
29-34: Fix formatting in Prerequisites sectionThere are some formatting issues that should be addressed:
1. **Service URL** - To set up the **ntfy** integration, you need the URL of the ntfy service you wish to use. - Use `https://ntfy.sh` for the official ntfy service. - Provide the URL of an alternative public ntfy service or your self-hosted instance (for example, `https://your-ntfy-instance.com`).🧰 Tools
🪛 Markdownlint (0.37.0)
30-30: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
58-69: Fix formatting in example sectionThere are some formatting issues that should be addressed:
- Remove extra blank line at line 58
- Add blank lines around the YAML code block:
{% raw %} + ```yaml action: notify.send_message data: message: "Reminder: Have you considered frogs?" entity_id: notify.mytopic
{% endraw %}
<details> <summary>🧰 Tools</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> 58-58: Expected: 1; Actual: 2 Multiple consecutive blank lines (MD012, no-multiple-blanks) --- 68-68: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> --- `77-77`: **Add missing newline at end of file** Add a newline character at the end of the file to comply with markdown standards. ```diff {% include integrations/remove_device_service.md %} +🧰 Tools
🪛 Markdownlint (0.37.0)
77-77: null
Files should end with a single newline character(MD047, single-trailing-newline)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/ntfy.markdown(1 hunks)
🧰 Additional context used
🪛 Markdownlint (0.37.0)
source/_integrations/ntfy.markdown
30-30: Expected: 0 or 2; Actual: 4
Trailing spaces
(MD009, no-trailing-spaces)
58-58: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
68-68: null
Fenced code blocks should be surrounded by blank lines
(MD031, blanks-around-fences)
77-77: null
Files should end with a single newline character
(MD047, single-trailing-newline)
🔇 Additional comments (3)
source/_integrations/ntfy.markdown (3)
17-21: Well-structured introduction and service description!Good use of the
{% term integration %}template and comprehensive explanation of the ntfy service.
47-52: Clear and well-structured configuration parameters!Good use of the configuration template and clear parameter descriptions.
7-7: Verify the release versionThe release version is set to
2025.2. Please confirm if this is the intended version for this integration's release.✅ Verification successful
Release version 2025.2 is valid
The version is consistent with other upcoming integration releases. Several other integrations are also targeting 2025.1 and 2025.2 releases.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Check current release version pattern in other integration docs rg -g 'source/_integrations/*.markdown' '^ha_release: \d{4}\.' | sort -r | head -n 5Length of output: 376
Script:
#!/bin/bash # Check for any 2024 or 2025 releases rg -g 'source/_integrations/*.markdown' '^ha_release: 202[45]\.' | sort -rLength of output: 4933
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (2)
source/_integrations/ntfy.markdown (2)
21-21: Maintain consistent capitalizationThe service name capitalization is inconsistent. "Ntfy" should be "ntfy" to match the rest of the documentation.
-As Ntfy is 100% open-source, there are also alternative public ntfy services but can also be self-hosted. +As ntfy is 100% open-source, there are also alternative public ntfy services but can also be self-hosted.
62-68: Add blank lines around the code blockTo follow markdown best practices, add blank lines before and after the YAML code block.
{% raw %} + ```yaml action: notify.send_message data: message: "Reminder: Have you considered frogs?" entity_id: notify.mytopic
{% endraw %}
<details> <summary>🧰 Tools</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> 67-67: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> </blockquote></details> </blockquote></details> <details> <summary>📜 Review details</summary> **Configuration used: CodeRabbit UI** **Review profile: CHILL** **Plan: Pro** <details> <summary>📥 Commits</summary> Reviewing files that changed from the base of the PR and between 39cd95f7171e433688474dc28ccaa1725e4f3870 and 52ea430ea1bfd9ba3738d50f24b358ba61ddc293. </details> <details> <summary>📒 Files selected for processing (1)</summary> * `source/_integrations/ntfy.markdown` (1 hunks) </details> <details> <summary>🧰 Additional context used</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> <details> <summary>source/_integrations/ntfy.markdown</summary> 67-67: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> </details> <details> <summary>⏰ Context from checks skipped due to timeout of 90000ms (3)</summary> * GitHub Check: Redirect rules - home-assistant-docs * GitHub Check: Header rules - home-assistant-docs * GitHub Check: Pages changed - home-assistant-docs </details> <details> <summary>🔇 Additional comments (4)</summary><blockquote> <details> <summary>source/_integrations/ntfy.markdown (4)</summary> `7-7`: **Verify the release version** The release version is set to `2025.2`, which appears to be in the future. Please verify if this is the intended version or if it should be adjusted to match the actual planned release. --- `23-42`: **Well-structured prerequisites section!** The prerequisites section is clear, comprehensive, and provides all necessary information for users to get started. --- `47-52`: **Configuration parameters are well documented!** The configuration section follows Home Assistant documentation standards and provides clear parameter descriptions. --- `72-76`: **Removal instructions are properly documented!** The removal section follows the standard template and provides clear instructions. </details> </blockquote></details> </details> <!-- This is an auto-generated comment by CodeRabbit for review status -->
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
source/_integrations/ntfy.markdown (3)
27-42: Consider adding security recommendationsThe prerequisites section is well-structured, but consider adding security recommendations:
- Topic name best practices (e.g., avoiding easily guessable names)
- Authentication options if available
- HTTPS requirements for self-hosted instances
62-68: Add blank lines around the code blockAccording to markdown best practices, fenced code blocks should be surrounded by blank lines.
{% raw %} + ```yaml action: notify.send_message data: message: "Reminder: Have you considered frogs?" entity_id: notify.mytopic
{% endraw %}
<details> <summary>🧰 Tools</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> 67-67: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> --- `54-70`: **Consider expanding the example section** While the current example is clear, consider adding examples that demonstrate: - Different notification options (if supported) - Common use cases in automations - Error handling scenarios <details> <summary>🧰 Tools</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> 67-67: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> </blockquote></details> </blockquote></details> <details> <summary>📜 Review details</summary> **Configuration used: CodeRabbit UI** **Review profile: CHILL** **Plan: Pro** <details> <summary>📥 Commits</summary> Reviewing files that changed from the base of the PR and between 52ea430ea1bfd9ba3738d50f24b358ba61ddc293 and d65203762263729543ea6d545d9f57dcf1883e6d. </details> <details> <summary>📒 Files selected for processing (1)</summary> * `source/_integrations/ntfy.markdown` (1 hunks) </details> <details> <summary>🧰 Additional context used</summary> <details> <summary>🪛 Markdownlint (0.37.0)</summary> <details> <summary>source/_integrations/ntfy.markdown</summary> 67-67: null Fenced code blocks should be surrounded by blank lines (MD031, blanks-around-fences) </details> </details> </details> <details> <summary>⏰ Context from checks skipped due to timeout of 90000ms (3)</summary> * GitHub Check: Redirect rules - home-assistant-docs * GitHub Check: Header rules - home-assistant-docs * GitHub Check: Pages changed - home-assistant-docs </details> <details> <summary>🔇 Additional comments (4)</summary><blockquote> <details> <summary>source/_integrations/ntfy.markdown (4)</summary> `17-21`: **Well-written introduction and service description!** The introduction clearly explains the integration's purpose and provides comprehensive information about the ntfy service, including both official and self-hosted options. --- `47-52`: **Configuration parameters are well documented!** The configuration section uses the standard Home Assistant templates and clearly documents all required parameters. --- `72-76`: **Removal instructions are properly documented!** The section correctly uses the standard Home Assistant template for removal instructions. --- `7-7`: **Verify the release version** The release version is set to `2025.2`. Please ensure this aligns with the planned release schedule for Home Assistant. <details> <summary>✅ Verification successful</summary> <!-- [monologue] [task verify_release_version_2/2] Analyze the 2025.x release versions in detail [observations] - Found 9 integrations with 2025.x release versions - Most integrations use 2025.1 - Only two integrations use 2025.2: 1. overseerr 2. ntfy (the one we're reviewing) [analysis] 1. The use of 2025.x versions appears to be intentional and coordinated 2. 2025.2 is being used by another integration as well 3. This suggests a planned release schedule where: - 2025.1 is the first release of 2025 - 2025.2 is the second release of 2025 4. The version number follows the established pattern [actions] Generate final response confirming the version is appropriate --> **Release version is appropriate** The version `2025.2` aligns with other new integrations planned for the same release cycle, including the overseerr integration. </details> <details> <summary>🏁 Scripts executed</summary> The following scripts were executed for the analysis: Script: ```shell #!/bin/bash # Check current and upcoming release versions rg -l "ha_release: 202[4-5]" source/_integrations/Length of output: 3413
Script:
#!/bin/bash # Check specifically for 2025.x release versions rg "ha_release: 2025" source/_integrations/Length of output: 563
Proposed change
Adds documentation for the ntfy integration
Type of change
currentbranch).currentbranch).nextbranch).nextbranch).Additional information
Checklist
currentbranch.nextbranch.Summary by CodeRabbit
notify.send_messageaction.