Actions-OpenWrt

github-actions云编译，文件包含:

xxx_feeds.conf.default
xxx.config
xxx_diy-part1.sh
xxx_diy-part2.sh

RX_WT-600配置：

【cpu】：MediaTek MT7621AT
【RAM】：128MB
【ROM】：32MB（原厂为16MB）
【2.4G】：MT7603EN
【5G】：MT7612EN
【面向端口布局】：L L L L W，MT7530，1000Mbps
【USB端口】：USB2*1，USB3*1

===============================================================

English | 中文

A template for building OpenWrt with GitHub Actions

Usage

Click the Use this template button to create a new repository.
Generate .config files using Lean's OpenWrt source code. ( You can change it through environment variables in the workflow file. )
Push .config file to the GitHub repository.
Select Build OpenWrt on the Actions page.
Click the Run workflow button.
When the build is complete, click the Artifacts button in the upper right corner of the Actions page to download the binaries.

It may take a long time to create a .config file and build the OpenWrt firmware. Thus, before create repository to build your own firmware, you may check out if others have already built it which meet your needs by simply search Actions-Openwrt in GitHub.
Add some meta info of your built firmware (such as firmware architecture and installed packages) to your repository introduction, this will save others' time.

Name		Name	Last commit message	Last commit date
Latest commit History 593 Commits
.github/workflows		.github/workflows
bak		bak
config-files		config-files
files		files
LICENSE		LICENSE
README.md		README.md
istoreos.config		istoreos.config
istoreos_diy-part1.sh		istoreos_diy-part1.sh
istoreos_diy-part2.sh		istoreos_diy-part2.sh
istoreos_feeds.conf.default		istoreos_feeds.conf.default
kiddin9.config		kiddin9.config
kiddin9_diy-part1.sh		kiddin9_diy-part1.sh
kiddin9_diy-part2.sh		kiddin9_diy-part2.sh
kiddin9_feeds.conf.default		kiddin9_feeds.conf.default
lede.config		lede.config
lede17.01.config		lede17.01.config
lede17.01_diy-part1.sh		lede17.01_diy-part1.sh
lede17.01_diy-part2.sh		lede17.01_diy-part2.sh
lede17.01_feeds.conf.default		lede17.01_feeds.conf.default
lede17.01_jacelift.config		lede17.01_jacelift.config
lede17.01_jacelift_diy-part1.sh		lede17.01_jacelift_diy-part1.sh
lede17.01_jacelift_diy-part2.sh		lede17.01_jacelift_diy-part2.sh
lede17.01_jacelift_feeds.conf.default		lede17.01_jacelift_feeds.conf.default
lede_diy-part1.sh		lede_diy-part1.sh
lede_diy-part2.sh		lede_diy-part2.sh
lede_feeds.conf.default		lede_feeds.conf.default
lede_jacelift.config		lede_jacelift.config
lede_jacelift_diy-part1.sh		lede_jacelift_diy-part1.sh
lede_jacelift_diy-part2.sh		lede_jacelift_diy-part2.sh
lede_jacelift_feeds.conf.default		lede_jacelift_feeds.conf.default
openwrt.config		openwrt.config
openwrt_diy-part1.sh		openwrt_diy-part1.sh
openwrt_diy-part2.sh		openwrt_diy-part2.sh
openwrt_feeds.conf.default		openwrt_feeds.conf.default