Ansible role for setting up ISC DHCPD. The responsibilities of this role are to install packages and manage the configuration (dhcpd.conf(5)). Managing the firewall configuration is NOT a concern of this role. You can do this in your local playbook, or use another role (e.g. bertvv.rh-base.
Refer to the change log for notable changes in each release.
Do you use/like this role? Please consider giving it a star. If you rate this role on Ansible Galaxy and find it lacking in some respect, please consider opening an Issue with actionable feedback or a PR so we can improve it. Thank you!
No specific requirements
This role is able to set global options, and to specify subnet declarations.
See the test playbook for a working example of a DHCP server in a test environment based on Vagrant and VirtualBox. This section is a reference of all supported options.
The following variables, when set, will be added to the global section of the DHCP configuration file. If there is no default value specified, the corresponding setting will be left out of dhcpd.conf(5).
See the dhcp-options(5) man page for more information about these options.
| Variable | Comments |
|---|---|
dhcp_global_authoritative |
Global authoritative statement (authoritative, not authoritative) |
dhcp_global_booting |
Global booting (allow, deny, ignore) |
dhcp_global_bootp |
Global bootp (allow, deny, ignore) |
dhcp_global_broadcast_address |
Global broadcast address |
dhcp_global_classes |
Class definitions with a match statement(1) |
dhcp_global_default_lease_time |
Default lease time in seconds |
dhcp_global_domain_name_servers |
A list of IP addresses of DNS servers(2) |
dhcp_global_domain_name |
The domain name the client should use when resolving host names |
dhcp_global_domain_search |
A list of domain names to be used by the client to locate non-FQDNs(1) |
dhcp_global_failover |
Failover peer settings (3) |
dhcp_global_failover_peer |
Name for the failover peer (e.g. foo) |
dhcp_global_filename |
Filename to request for boot |
dhcp_global_includes_missing |
Boolean. Continue if includes file(s) missing from role's files/ |
dhcp_global_includes |
List of config files to be included (from dhcp_config_dir) |
dhcp_global_log_facility |
Global log facility (e.g. daemon, syslog, user, ...) |
dhcp_global_max_lease_time |
Maximum lease time in seconds |
dhcp_global_next_server |
IP for PXEboot server |
dhcp_global_ntp_servers |
List of IP addresses of NTP servers |
dhcp_global_omapi_port |
OMAPI port |
dhcp_global_omapi_secret |
OMAPI secret |
dhcp_global_other_options |
Array of arbitrary additional global options |
dhcp_global_routers |
IP address of the router |
dhcp_global_server_name |
Server name sent to the client |
dhcp_global_server_state |
Service state (started, stopped) |
dhcp_global_subnet_mask |
Global subnet mask |
dhcp_custom_includes |
List of jinja config files to be included (from dhcp_config_dir) |
Remarks
(1) This role supports the definition of classes with a match statement, e.g.:
# Class for VirtualBox VMs
dhcp_global_classes:
- name: vbox
match: 'match if binary-to-ascii(16,8,":",substring(hardware, 1, 3)) = "8:0:27"'Class names can be used in the definition of address pools (see below).
(2) The role variable dhcp_global_domain_name_servers may be written either as a list (when you have more than one item), or as a string (when you have only one). The following snippet shows an example of both:
# A single DNS server
dhcp_global_domain_name_servers: 8.8.8.8
# A list of DNS servers
dhcp_global_domain_name_servers:
- 8.8.8.8
- 8.8.4.4(3) This role also supports the definition of a failover peer, e.g.:
# Failover peer definition
dhcp_global_failover_peer: failover-group
dhcp_global_failover:
role: primary # | secondary
address: 192.168.222.2
port: 647
peer_address: 192.168.222.3
peer_port: 647
max_response_delay: 15
max_unacked_updates: 10
load_balance_max_seconds: 5
split: 255
mclt: 3600The variable dhcp_global_failover_peer contains a name for the configured peer, to be used on a per pool basis. The failover declaration options are specified with the variable dhcp_global_failover, a dictionary that may contain the following options:
| Option | Required | Comment |
|---|---|---|
address |
no | This server's IP address |
hba |
no | colon-separated-hex-list |
load_balance_max_seconds |
no | Cutoff after which load balance is disabled (3 to 5 recommended) |
max-balance |
no | Failover pool balance statement |
max-lease-misbalance |
no | Failover pool balance statement |
max-lease-ownership |
no | Failover pool balance statement |
max_response_delay |
no | Maximum seconds without contact before engaging failover |
max_unacked_updates |
no | Maximum BNDUPD it can send before receiving a BNDACK (10 recommended) |
mclt |
no | Maximum Client Lead Time |
min-balance |
no | Failover pool balance statement |
peer_address |
no | Failover peer's IP addres |
peer_port |
no | This server's port (generally 519/520 or 647/847) |
port |
no | This server's port (generally 519/520 or 647/847) |
role |
no | primary, secondary |
split |
no | Load balance split (0-255) |
The failover peer directive has to be in the definition of address pools (see below).
The role variable dhcp_subnets contains a list of dicts, specifying the subnet declarations to be added to the DHCP configuration file. Every subnet declaration should have an ip and netmask, other options are not mandatory. We start this section with an example, a complete overview of supported options follows.
dhcp_subnets:
- ip: 192.168.222.0
netmask: 255.255.255.128
domain_name_servers:
- 10.0.2.3
- 10.0.2.4
range_begin: 192.168.222.50
range_end: 192.168.222.127
- ip: 192.168.222.128
default_lease_time: 3600
max_lease_time: 7200
netmask: 255.255.255.128
domain_name_servers: 10.0.2.3
routers: 192.168.222.129An alphabetical list of supported options in a subnet declaration:
| Option | Required | Comment |
|---|---|---|
booting |
no | allow,deny,ignore |
bootp |
no | allow,deny,ignore |
default_lease_time |
no | Default lease time for this subnet (in seconds) |
domain_name_servers |
no | List of domain name servers for this subnet(1) |
domain_search |
no | List of domain names for resolution of non-FQDNs(1) |
filename |
no | filename to retrieve from boot server |
hosts |
no | List of fixed IP address hosts for each subnet, similar to dhcp_hosts |
ip |
yes | Required. IP address of the subnet |
max_lease_time |
no | Maximum lease time for this subnet (in seconds) |
netmask |
yes | Required. Network mask of the subnet (in dotted decimal notation) |
next_server |
no | IP address of the boot server |
ntp_servers |
no | List of NTP servers for this subnet |
range_begin |
no | Lowest address in the range of dynamic IP addresses to be assigned |
range_end |
no | Highest address in the range of dynamic IP addresses to be assigned |
ranges |
no | If multiple ranges are needed, they can be specified as a list (2) |
routers |
no | IP address of the gateway for this subnet |
server_name |
no | Server name sent to the client |
subnet_mask |
no | Overrides the netmask of the subnet declaration |
You can specify address pools within a subnet by setting the pools options. This allows you to specify a pool of addresses that will be treated differently than another pool of addresses, even on the same network segment or subnet. It is a list of dicts with the following keys, all of which are optional:
| Option | Comment |
|---|---|
allow |
Specifies which hosts are allowed in this pool(1) |
default_lease_time |
The default lease time for this pool |
deny |
Specifies which hosts are not allowed in this pool |
domain_name_servers |
The domain name servers to be used for this pool(1) |
max_lease_time |
The maximum lease time for this pool |
min_lease_time |
The minimum lease time for this pool |
range_begin |
The lowest address in this pool |
range_end |
The highest address in this pool |
(1) For the allow and deny fields, the options are enumerated in dhcpd.conf(5), but include:
bootingbootpclient-updatesknown-clientsmembers of "CLASS"unknown-clients
(2) For multiple subnet ranges, they can be specified, thus:
ranges:
- { begin: 192.168.222.50, end: 192.168.222.99 }
- { begin: 192.168.222.110, end: 192.168.222.127 }You can specify hosts that should get a fixed IP address based on their MAC by setting the dhcp_hosts option. This is a list of dicts with the following three keys, of which name and mac are mandatory:
| Option | Comment |
|---|---|
name |
The name of the host |
mac |
The MAC address of the host |
ip |
The IP address to be assigned to the host |
dhcp_hosts:
- name: cl1
mac: '00:11:22:33:44:55'
ip: 192.168.222.150
- name: cl2
mac: '00:de:ad:be:ef:00'
ip: 192.168.222.151Setting the variable dhcp_pxeboot_server, will redirect PXE clients to the specified PXEBoot server in order to boot over the network. The specified server should have boot images on the expected locations. Use e.g. bertvv.pxeserver to configure it.
Setting the variable dhcp_custom_inludes to a jinja template will allow custom configurations to be used which will subsiquently be included into the dhcpd.conf file.
dhcp_custom_includes:
- custom-dhcp-config.confYou can create your own variables to use within the template allowing for total flexibility. To avoid variable conflicts make sure that you use variables that are not referenced within this role as this will duplicate configuration in multiple .conf files.
dhcp_custom_hosts:
- name: Juniper1
mac: 'de:ad:c0:de:ca:fe'
ip: 192.168.35.160
options:
- name: tftp-server-name
value: 192.168.35.152
- name: host-name
value: Juniper1
- name: NEW_OP.transfer-mode
value: "http"
- name: NEW_OP.config-file-name
value: "/configurations/j1-switch.config"Finally the jinja template must contain valid ISC DHCPD configuration (dhcpd.conf(5)). This is an example of using bertvv.dhcp for juniper Zero-Touch-Provisioning.
option space NEW_OP;
option NEW_OP.image-file-name code 0 = text;
option NEW_OP.config-file-name code 1 = text;
option NEW_OP.image-file-type code 2 = text;
option NEW_OP.transfer-mode code 3 = text;
option NEW_OP.alt-image-file-name code 4= text;
option NEW_OP.http-port code 5= text;
option NEW_OP-encapsulation code 43 = encapsulate NEW_OP;
{% if dhcp_custom_hosts is defined %}
#
# Host declarations
#
{% for host in dhcp_custom_hosts %}
host {{ host.name | replace (" ","_") | replace ("'","_") | replace (":","_") }} {
hardware ethernet {{ host.mac }};
{% if host.ip is defined %}
fixed-address {{ host.ip }};
{% endif %}
{% if host.options is defined %}
{% for option in host.options %}
{{ option.name }} "{{ option.value }}"
{% endfor %}
{% endif %}
}
{% endfor %}
{% endif %}No dependencies.
See the test playbook
Tests for this role are provided in the form of a Vagrant environment that is kept in a separate branch, vagrant-tests. For more information about setting up the test environment and running the tests, refer to the README of the test branch.
BSD
Issues, feature requests, ideas are appreciated and can be posted in the Issues section. Pull requests are also very welcome. Preferably, create a topic branch and when submitting, squash your commits into one (with a descriptive message).
- Ahmed Sghaier
- Alessandro Ogier
- Alex Gittings
- Bert Van Vreckem (maintainer)
- Birgit Croux
- @cacheira
- @donvipre
- Felix Egli
- Guillaume Parent
- Jonathan Piron
- Josh Benner
- @jpiron
- @lijok
- Maxim Baranov
- @RayfordJ
- Rian Bogle
- Stuart Knight (maintainer)