Skip to content

Commit

Permalink
temporarily remove a bunch of keyboard firmware bits so that we can
Browse files Browse the repository at this point in the history 
build with focus working
  • Loading branch information
@obra
obra committed Mar 25, 2024
1 parent 1a1ab9c commit 5dce776
Showing 1 changed file with 1 addition and 167 deletions.
168 changes: 1 addition & 167 deletions examples/Devices/Keyboardio/Model101/Model101.ino
View file
Original file line number Diff line number Diff line change
Expand Up @@ -367,16 +367,6 @@ const macro_t *macroAction(uint8_t macro_id, KeyEvent &event) {
// These 'solid' color effect definitions define a rainbow of
// LED color modes calibrated to draw 500mA or less on the
// Keyboardio Model 100.


static kaleidoscope::plugin::LEDSolidColor solidRed(160, 0, 0);
static kaleidoscope::plugin::LEDSolidColor solidOrange(140, 70, 0);
static kaleidoscope::plugin::LEDSolidColor solidYellow(130, 100, 0);
static kaleidoscope::plugin::LEDSolidColor solidGreen(0, 160, 0);
static kaleidoscope::plugin::LEDSolidColor solidBlue(0, 70, 130);
static kaleidoscope::plugin::LEDSolidColor solidIndigo(0, 0, 170);
static kaleidoscope::plugin::LEDSolidColor solidViolet(130, 0, 120);

/** toggleLedsOnSuspendResume toggles the LEDs off when the host goes to sleep,
* and turns them back on when it wakes up.
*/
Expand Down Expand Up @@ -466,8 +456,6 @@ KALEIDOSCOPE_INIT_PLUGINS(

// The EEPROMSettings & EEPROMKeymap plugins make it possible to have an
// editable keymap in EEPROM.
EEPROMSettings,
EEPROMKeymap,

// Focus allows bi-directional communication with the host, and is the
// interface through which the keymap in EEPROM can be edited.
Expand All @@ -486,38 +474,6 @@ KALEIDOSCOPE_INIT_PLUGINS(
// programmatically.
FirmwareVersion,

// The LayerNames plugin allows Chrysalis to display - and edit - custom layer
// names, to be shown instead of the default indexes.
LayerNames,

// Enables setting, saving (via Chrysalis), and restoring (on boot) the
// default LED mode.
DefaultLEDModeConfig,

// Enables controlling (and saving) the brightness of the LEDs via Focus.
LEDBrightnessConfig,

// ----------------------------------------------------------------------
// Keystroke-handling plugins

// The Qukeys plugin enables the "Secondary action" functionality in
// Chrysalis. Keys with secondary actions will have their primary action
// performed when tapped, but the secondary action when held.
Qukeys,

// SpaceCadet can turn your shifts into parens on tap, while keeping them as
// Shifts when held. SpaceCadetConfig lets Chrysalis configure some aspects of
// the plugin.
SpaceCadet,
SpaceCadetConfig,

// Enables the "Sticky" behavior for modifiers, and the "Layer shift when
// held" functionality for layer keys.
OneShot,
OneShotConfig,
EscapeOneShot,
EscapeOneShotConfig,

// The macros plugin adds support for macros
Macros,

Expand All @@ -535,70 +491,11 @@ KALEIDOSCOPE_INIT_PLUGINS(

// Enables the GeminiPR Stenography protocol. Unused by default, but with the
// plugin enabled, it becomes configurable - and then usable - via Chrysalis.
GeminiPR,

// ----------------------------------------------------------------------
// LED mode plugins

// The boot greeting effect pulses the LED button for 10 seconds after the
// keyboard is first connected
BootGreetingEffect,

// LEDControl provides support for other LED modes
LEDControl,

// We start with the LED effect that turns off all the LEDs.
LEDOff,

// The rainbow effect changes the color of all of the keyboard's keys at the same time
// running through all the colors of the rainbow.
LEDRainbowEffect,

// The rainbow wave effect lights up your keyboard with all the colors of a rainbow
// and slowly moves the rainbow across your keyboard
LEDRainbowWaveEffect,

// The chase effect follows the adventure of a blue pixel which chases a red pixel across
// your keyboard. Spoiler: the blue pixel never catches the red pixel
LEDChaseEffect,

// These static effects turn your keyboard's LEDs a variety of colors
solidRed,
solidOrange,
solidYellow,
solidGreen,
solidBlue,
solidIndigo,
solidViolet,

// The breathe effect slowly pulses all of the LEDs on your keyboard
LEDBreatheEffect,

// The AlphaSquare effect prints each character you type, using your
// keyboard's LEDs as a display
AlphaSquareEffect,

// The stalker effect lights up the keys you've pressed recently
StalkerEffect,

// The LED Palette Theme plugin provides a shared palette for other plugins,
// like Colormap below
LEDPaletteTheme,

// The Colormap effect makes it possible to set up per-layer colormaps
ColormapEffect,

// The numpad plugin is responsible for lighting up the 'numpad' mode
// with a custom LED effect
NumPad,

// The HostPowerManagement plugin allows us to turn LEDs off when then host
// goes to sleep, and resume them when it wakes up.
HostPowerManagement,

// Turns LEDs off after a configurable amount of idle time.
IdleLEDs,
PersistentIdleLEDs,
LEDOff

// ----------------------------------------------------------------------
// Miscellaneous plugins
Expand All @@ -607,11 +504,6 @@ KALEIDOSCOPE_INIT_PLUGINS(
// comfortable - or able - to do automatically, but can be useful
// nevertheless. Such as toggling the key report protocol between Boot (used
// by BIOSes) and Report (NKRO).
USBQuirks,

// The hardware test mode, which can be invoked by tapping Prog, LED and the
// left Fn button at the same time.
HardwareTestMode //,
);

/** The 'setup' function is one of the two standard Arduino sketch functions.
Expand All @@ -622,64 +514,6 @@ void setup() {
// First, call Kaleidoscope's internal setup function
Kaleidoscope.setup();

// Set the hue of the boot greeting effect to something that will result in a
// nice green color.
BootGreetingEffect.hue = 85;

// While we hope to improve this in the future, the NumPad plugin
// needs to be explicitly told which keymap layer is your numpad layer
NumPad.numPadLayer = NUMPAD;

// We configure the AlphaSquare effect to use RED letters
AlphaSquare.color = CRGB(255, 0, 0);

// Set the rainbow effects to be reasonably bright, but low enough
// to mitigate audible noise in some environments.
LEDRainbowEffect.brightness(170);
LEDRainbowWaveEffect.brightness(160);

// Set the action key the test mode should listen for to Left Fn
HardwareTestMode.setActionKey(R3C6);

// The LED Stalker mode has a few effects. The one we like is called
// 'BlazingTrail'. For details on other options, see
// https://github.com/keyboardio/Kaleidoscope/blob/master/docs/plugins/LED-Stalker.md
StalkerEffect.variant = STALKER(BlazingTrail);

// To make the keymap editable without flashing new firmware, we store
// additional layers in EEPROM. For now, we reserve space for eight layers. If
// one wants to use these layers, just set the default layer to one in EEPROM,
// by using the `settings.defaultLayer` Focus command, or by using the
// `keymap.onlyCustom` command to use EEPROM layers only.
EEPROMKeymap.setup(8);

// We need to tell the Colormap plugin how many layers we want to have custom
// maps for. To make things simple, we set it to eight layers, which is how
// many editable layers we have (see above).
ColormapEffect.max_layers(8);

// For Dynamic Macros, we need to reserve storage space for the editable
// macros. A kilobyte is a reasonable default.
DynamicMacros.reserve_storage(1024);

// If there's a default layer set in EEPROM, we should set that as the default
// here.
Layer.move(EEPROMSettings.default_layer());

// To avoid any surprises, SpaceCadet is turned off by default. However, it
// can be permanently enabled via Chrysalis, so we should only disable it if
// no configuration exists.
SpaceCadetConfig.disableSpaceCadetIfUnconfigured();

// Editable layer names are stored in EEPROM too, and we reserve 16 bytes per
// layer for them. We need one extra byte per layer for bookkeeping, so we
// reserve 17 / layer in total.
LayerNames.reserve_storage(17 * 8);

// Unless configured otherwise with Chrysalis, we want to make sure that the
// firmware starts with LED effects off. This avoids over-taxing devices that
// don't have a lot of power to share with USB devices
DefaultLEDModeConfig.activateLEDModeIfUnconfigured(&LEDOff);
}

/** loop is the second of the standard Arduino sketch functions.
Expand Down

0 comments on commit 5dce776

Please sign in to comment.