Mbed sync

.gitignore

@@ -1,3 +1,4 @@
 build
 yotta_targets
 yotta_modules
+.hg

source/examples/proximity-heart/config.json

@@ -0,0 +1,7 @@
+{    
+    "microbit-dal":{
+        "bluetooth":{
+            "enabled": 0
+        }
+    }
+}

source/examples/proximity-heart/main.cpp

@@ -0,0 +1,160 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 British Broadcasting Corporation.
+This software is provided by Lancaster University by arrangement with the BBC.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+
+/*
+ * This is a simple example that uses the micro:bit radio to show if another
+ * micro:bit running the same code is nearby.
+ *
+ * Each micro:bit is periodically broadcasting a group name, and listening
+ * to see if another micro:bit in that group is also in-range. 
+ *
+ * When another micro:bit in the same group is detected, the display of the
+ * detecting micro:bit will show a filled-in heart shape
+ *
+ * Otherwise, the display will show an empty heart shape
+ *
+ */
+
+#include "MicroBit.h"
+
+#if MICROBIT_BLE_ENABLED 
+ #ifdef YOTTA_CFG
+  #error "This example needs BLE to be disabled. Use the yotta config.json in the proximit-heart directory to do this"
+ #else
+  #error "This example needs BLE to be disabled in the microbit config file in the microbit-dal: MicroBitConfig.h"
+ #endif
+#endif
+
+MicroBit    uBit;
+
+// Have we seen a friend recently?
+uint8_t friend_seen = 0;
+
+// Are we currently sending out messages?
+uint8_t broadcast = 1;
+
+/* We have a group name, and if any micro:bit is in range and in the group
+ * then the others will see it.
+ */
+const char group_name[] = "tiger";
+
+const uint8_t empty_heart_arr[] {
+                          0, 1, 0, 1, 0,
+                          1, 0, 1, 0, 1,
+                          1, 0, 0, 0, 1,
+                          0, 1, 0, 1, 0,
+                          0, 0, 1, 0, 0, };
+
+const uint8_t full_heart_arr[] {
+                          0, 1, 0, 1, 0,
+                          1, 1, 1, 1, 1,
+                          1, 1, 1, 1, 1,
+                          0, 1, 1, 1, 0,
+                          0, 0, 1, 0, 0, }; 
+
+const uint8_t small_heart_arr[] {
+                          0, 0, 0, 0, 0,
+                          0, 1, 0, 1, 0,
+                          0, 1, 1, 1, 0,
+                          0, 1, 1, 0, 0,
+                          0, 0, 0, 0, 0, };
+
+MicroBitImage empty_heart(5,5,empty_heart_arr);
+MicroBitImage full_heart(5,5,full_heart_arr);
+MicroBitImage small_heart(5,5,small_heart_arr);
+
+/* We send messages when people press buttons 'A' and 'B'.
+ * At the moment, all micro:bits listening for messages
+ * will see these and can respond to them
+ * Challenge: make only certain micro:bits respond to these
+ */
+void onButtonA(MicroBitEvent)
+{
+    uBit.radio.datagram.send("1");    
+}
+
+void onButtonB(MicroBitEvent)
+{
+    uBit.radio.datagram.send("2");    
+}
+
+/* We toggle broadcasting if both buttons are pressed together */
+void onButtonAB(MicroBitEvent)
+{
+    broadcast = !broadcast;
+    uBit.display.print("!");
+}
+
+
+void onData(MicroBitEvent)
+{
+    ManagedString s = uBit.radio.datagram.recv();
+    int rssi = uBit.radio.getRSSI();
+
+    if (s == "1")
+        uBit.display.print(full_heart);
+
+    if (s == "2")
+        uBit.display.print(small_heart);
+
+    /* For detecting the presence of our friend, we require them to be sending
+     * the same group name as we are in 
+     */ 
+    if (s == group_name && rssi < 70) {
+        // We can make this larger to allow more missed packets
+        friend_seen = 3;
+    }
+}
+
+int main()
+{
+    // Initialise the micro:bit runtime.
+    uBit.init();
+
+    // Setup some button handlers to allow direct heartbeat control with buttons
+    uBit.messageBus.listen(MICROBIT_ID_BUTTON_A, MICROBIT_EVT_ANY, onButtonA);
+    uBit.messageBus.listen(MICROBIT_ID_BUTTON_B, MICROBIT_EVT_ANY, onButtonB);
+    uBit.messageBus.listen(MICROBIT_ID_BUTTON_AB, MICROBIT_EVT_ANY, onButtonAB);
+
+    //Setup a hander to run when data is received
+    uBit.messageBus.listen(MICROBIT_ID_RADIO, MICROBIT_RADIO_EVT_DATAGRAM, onData);
+
+    uBit.radio.enable();
+
+    while(1) {
+        if (friend_seen) {
+	    uBit.display.print(full_heart); 
+            friend_seen -= 1;
+        } else {
+            uBit.display.print(empty_heart);
+        }
+
+        if (broadcast)
+            uBit.radio.datagram.send(group_name);
+
+        uBit.sleep(1000);
+    }
+}

source/microbit.lib

@@ -0,0 +1 @@
+https://developer.mbed.org/teams/Lancaster-University/code/microbit/#4b89e7e3494f

sync-mbed.sh

@@ -0,0 +1,49 @@
+#!/bin/bash
+# This script is for syncing the microbit-samples repository on GitHub to
+# developer.mbed.org
+# usage:
+# cd microbit-samples
+# (optional) git pull etc
+# (optional) - update source/microbit.lib to point to the latest microbit.lib on mbed
+# ./sync-mbed.sh
+
+set -u
+set -x
+
+MBED_USERNAME="LancasterUniversity"
+MBED_URL="developer.mbed.org"
+MICROBIT_TEAM="teams/microbit"
+EXAMPLES_PATH="source/examples"
+EXAMPLE_PREPEND="microbit"
+
+GIT_REVISION=$(git describe --tags)
+EXAMPLES=$(ls "$EXAMPLES_PATH")
+#Or just do a subset:
+#EXAMPLES="hello-world invaders logic-gates proximity-heart simple-animation simple-radio-rx simple-radio-tx snake"
+
+#Feeling uncertain? Uncomment this and you get to 'approve' each line
+#trap read debug
+
+for example in $EXAMPLES; do
+	ENAME="$EXAMPLE_PREPEND-$example"
+	cd "$EXAMPLES_PATH/$example" || exit
+	CODE="https://[email protected]/$MICROBIT_TEAM/code/$ENAME"
+	if [ ! -d .hg ]; then
+		hg init
+	fi
+	FILES="$(git ls-files)";
+	hg pull $CODE
+	hg update
+	#clobber everything with the versions in git
+	for FILE in $FILES; do
+		git checkout "$FILE"
+	done
+	cp ../../*.lib ./
+	hg add *
+	hg commit -u $MBED_USERNAME -m "Update to git: $GIT_REVISION"
+	PUSH="https://developer.mbed.org/$MICROBIT_TEAM/code/$ENAME"
+	hg push "$PUSH"
+	rm *.lib
+	cd ../../../
+done
+