Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Update kgpe-d16.md #156

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Update kgpe-d16.md #156

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
14 changes: 13 additions & 1 deletion Installing-and-Configuring/Flashing-Guides/kgpe-d16.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,16 @@ grand_parent: Installing and configuring
Asus KGPE-D16
====

TO BE WRITTEN
Prerequisits:
1. Make sure you have compatiable RAM and CPU combination, see HCL https://github.com/linuxboot/heads/issues/1395 if you have a combination RAM and CPU that is not listed on the HCL please report back your results so we can improve the hardware compatability.
2. A 16MB flash chip, the stock 2MB flash chip is not big enough to store heads
3. A flasher see https://github.com/linuxboot/heads-wiki/issues/120#issuecomment-2194771490

Instructions:
Flash the 16MB chip with the flasher and place the newly flashed chip in the board
ch341a example
1. place chip in flasher and pull down the locking mechanism
2. plug flasher into a computer with the flashrom software installed
3. flash chip using "sudo flashrom --programmer ch341a_spi -w heads.rom"
4. remove flasher from usb
5. release the locking mechanism and place the flashchip on the board