========================================================================
 README for mTCP
========================================================================

mTCP is a highly scalable user-level TCP stack for multicore systems. 
mTCP source code is distributed under the Modified BSD License. For 
more detail, please refer to the LICENSE. The license term of io_engine 
driver and ported applications may differ from the mTCP’s.

========================================================================
 PREREQUISITE
========================================================================

We require the following libraries to run mTCP.
 - libps (PacketShader I/O engine library) OR libdpdk (Intel's DPDK package*)
 - libnuma
 - libpthread
 - librt
 Compling PSIO/DPDK driver requires kernel headers.
  - For Debian/Ubuntu, try apt-get install linux-headers-$(uname -r)


* We have modified the dpdk-2.0.0 package to export net_device stat data 
to the OS. To achieve this, the dpdk-2.0.0/lib/librte_eal/linuxapp/igb_uio/
directory was updated. We recommend using our package for DPDK installation. 

========================================================================
 INCLUDED DIRECTORIES
========================================================================

mtcp - mtcp source code directory
mtcp/src - source code
mtcp/src/include - mTCP’s internal header files
mtcp/lib - library file
mtcp/include - header files that applications will use

io_engine - event-driven packet I/O engine (io_engine)
io_engine/driver - driver source code
io_engine/lib - io_engine library
io_engine/include - io_engine header files
io_engine/samples - sample io_engine applications (not mTCP’s)

dpdk-2.0.0 - Intel's Data Plane Development Kit* (modified)
dpdk-2.0.0/...

dpdk/ - Holds soft links to the compiled dpdk-2.0.0 include/ and lib/ paths
dpdk/include - the header files
dpdk/lib - the libraries that need to be linked

apps - mTCP applications
apps/example - example applications (see README)
apps/lighttpd-1.4.32 - mTCP-ported lighttpd (see INSTALL)
apps/apache_benchmark - mTCP-ported apache benchmark (ab) (see README-mtcp) [DEPRECATED]
		       (May be revived based on users' feedback).

util - useful source code for applications

config - sample mTCP configuration files (may not be necessary)

========================================================================
 INSTALL GUIDES
========================================================================
mTCP can be prepared in two ways.

- PSIO VERSION -
----------------
1. make in io_engine/driver:
   	   # make
  - check ps_ixgbe.ko

2. install the driver:
   	   # ./install.py <# cores> <# cores>
  - refer to http://shader.kaist.edu/packetshader/io_engine/
  - you may need to change the ip address in install.py:46

3. make in io_engine/lib:
   	   # make 
  - check libps.a

4. Setup mtcp library:
   	   # ./configure --with-psio-lib=<$path_to_ioengine>
	     ## e.g. ./configure --with-psio-lib=`echo $PWD`/io_engine
	   # cd mtcp/src
   	   # make
  - check libmtcp.a in mtcp/lib
  - check header files in mtcp/include

5. make in util/:
   	   # make

6. make in apps/example:
   	   # make
  - check example binary files

7. Check the configurations
  - epserver.conf for server-side configuration
  - epwget.conf for client-side configuration
  - you may write your own configuration file for your application
  - please see README.config for more details
    -- for the latest version, dyanmic ARP learning is *DISABLED*

8. Run the applications!


- DPDK VERSION -
----------------
1. Set up Intel's DPDK driver. Please use our version of DPDK.
   We have only changed the lib/igb_uio/ submodule. The best
   method to compile DPDK package is to use DPDK's tools/setup.sh
   script. Please compile your package based on your own hardware
   configuration. We tested the mTCP stack on Intel Xeon E5-2690
   (x86_64) machine with Intel 82599 Ethernet adapters (10G). We
   used the following steps in the setup.sh script for our setup:
   
	   - Press [9] to compile the package
      	   - Press [12] to install the driver
      	   - Press [16] to setup 1024 2MB hugepages
      	   - Press [17] to register the Ethernet ports
      	   - Press [30] to quit the tool

  - check that DPDK package creates a new directory of compiled
  libraries. For x86_64 machines, the new subdirectory should be
  *dpdk-2.0.0/x86_64-native-linuxapp-gcc*

2. Next bring the dpdk-registered interfaces up. Please use the
   setup_iface_single_process.sh script file present in dpdk-2.0.0/tools/
   directory for this purpose. Please change lines 49-51 to change the IP	
   address. Under default settings, run the script as:
   	   # ./setup_iface_single_process.sh 3

   This sets the IP address of your interfaces as 10.0.x.3.

3. Create soft links for include/ and lib/ directories inside
   empty dpdk/ directory:
   	   # cd dpdk/
	   # ln -s <path_to_dpdk_2_0_0_directory>/x86_64-native-linuxapp-gcc/lib lib
	   # ln -s <path_to_dpdk_2_0_0_directory>/x86_64-native-linuxapp-gcc/include include

4. Setup mtcp library:
	   # ./configure --with-dpdk-lib=$<path_to_mtcp_release_v3>/dpdk
	     ## And not dpdk-2.0.0!
	     ## e.g. ./configure --with-dpdk-lib=`echo $PWD`/dpdk
	   # cd mtcp/src
   	   # make
  - check libmtcp.a in mtcp/lib
  - check header files in mtcp/include

5. make in util/:
   	   # make

6. make in apps/example:
   	   # make
  - check example binary files

7. Check the configurations
  - epserver.conf for server-side configuration
  - epwget.conf for client-side configuration
  - you may write your own configuration file for your application
  - please see README.config for more details
    -- for the latest version, dyanmic ARP learning is *DISABLED*

8. Run the applications!

========================================================================
 TESTED ENVIRONMENTS
========================================================================

mTCP runs on Linux-based operating systems (2.6.x for PSIO) with generic 
x86_64 CPUs, but to help evaluation, we provide our tested environments 
as follows.

Intel Xeon E5-2690 octacore CPU @ 2.90 GHz
32 GB of RAM (4 memory channels)
10 GbE NIC with Intel 82599 chipset (specifically Intel X520-DA2)
Debian 6.0.7 (Linux 2.6.32-5-amd64)

Intel Core i7-3770 quadcore CPU @ 3.40 GHz
16 GB of RAM (2 memory channels)
10 GbE NIC with Intel 82599 chipset (specifically Intel X520-DA2)
Ubuntu 10.04 (Linux 2.6.32-47)

Event-driven PacketShader I/O engine (extended io_engine-0.2)
 - PSIO is currently only compatible with Linux-2.6.

We tested the DPDK version (polling driver) with Linux-3.13.0 kernel.
========================================================================
 NOTES
========================================================================

1. mTCP currently runs with fixed memory pools. That means, the size of
   TCP receive and send buffers are fixed at the startup and does not 
   increase dynamically. This could be performance limit to the large 
   long-lived connections. Be sure to configure the buffer size 
   appropriately to your size of workload.

2. The client side of mTCP supports mtcp_init_rss() to create an 
   address pool that can be used to fetch available address space in 
   O(1). To easily congest the server side, this function should be 
   called at the application startup.

3. mTCP currently supports only 1 listening socket per an mTCP thread.

4. The supported socket options are limited for right now. Please refer 
   to the mtcp/src/api.c for more detail.

5. The counterpart of mTCP should enable TCP timestamp.

========================================================================
 FREQUENTLY ASKED QUESTIONS
========================================================================

1. How can I quit the application?
  - Use ^C to gracefully shutdown the application. Two consecutive 
    ^C (separated by 1 sec) will force quit.

2. My application keeps printing "No route to 0.0.0.0"
  - Try to turn off your network-manager for xge*. The network manager 
    can override the IP configuration set by install.py in PSIO driver.

3. Can I statically set the routing or arp table?
  - Yes, mTCP allows static route and arp configuration. Go to the 
    config directory and see sample_route.conf or sample_arp.conf. 
    Copy and adapt it to your condition and link (ln -s) the config 
    directory to the application directory. mTCP will find 
    config/route.conf and config/arp.conf for static configuration.

========================================================================
 CAUTION
========================================================================

1. Do not remove I/O driver (ps_ixgbe/igb_uio) while running mTCP 
   applications. The application will panic!

2. Use the ps_ixgbe/dpdk driver contained in this package, not the one 
   from some other place (e.g., from io_engine github).

========================================================================

                   Contact: mtcp at list.ndsl.kaist.edu
                             April 2, 2015. 
                 EunYoung Jeong <notav at ndsl.kaist.edu>
		 M. Asim Jamshed <ajamshed at ndsl.kaist.edu>